Room‐Temperature Solution‐Processed PbS Quantum Dot Solar Cells

Colloidal quantum dots (CQDs) are attractive absorber materials for high‐efficiency photovoltaics because of their facile solution processing, bandgap tunability due to quantum confinement effect, and multi‐exciton generation. To date, all published performance records for PbS CQDs solar cells have been based on the conventional hot‐injection synthesis method. This method usually requires relatively strict conditions such as high temperature and the utility of expensive source material (pyrophoric bis(trimethylsilyl) sulfide (TMS‐S)), limiting the potential for large‐scale and low‐cost synthesis of PbS CQDs. Here we report a facile room‐temperature synthetic method to produce high‐quality PbS CQDs through inexpensive ionic source materials including Pb(NO₃)₂ and Na₂S in the presence of triethanolamine (TEA) as the stabilizing ligand. The PbS CQDs were successfully prepared with an average particle size of about 5 nm. Solar cells based on the as‐synthesized PbS CQDs show a preliminary power conversion efficiency of 1.82%. This room‐temperature and low‐cost synthesis of PbS CQDs will further benefit the development of solution‐processed CQD solar cells.     

Synthesis and antitumor activity of camptothecin- 4β-triazolopodophyllotoxin conjugates

Abstract

Two new compounds (9 and 10) having a camptothecin (CPT) analog conjugated to the 4β-azido-4-deoxypodophyllotixin analog by untilizing the copper-catalyzed azide-alkyne cycloadditon (CuAAC) reaction, and were evaluated for their cytotoxicity against a panel of five human cancer cell lines (HL-60, SMMC-7721, A-549, MCF-7 and SW480) using the MTT (3-(4,5-dimethyl-thiahiazo-2-yl)-2,5-diphenyltetrazolium bromide) assay. Two novel conjugates shown weak cytotoxicity, compound 10 showed highly potent against HL-60 cell line tested, with IC₅₀ value 17.69?±?0.19?μM. This compound suggested its potential as anticancer agents for further development.

     

多维气相色谱法提高丙烯腈色谱分析速度的方法

采用多维气相色谱法,既可提高丙烯醛、丙酮、乙腈、丙烯腈相邻两组分的分离度,又可提高分析速度。按GDX-502与402的体积比为85∶15比例混装长4.5m、内径3mm的色谱柱;氢气作为载气,流速为65mL/min;柱箱初温140℃保持15min,以15℃/min的速率升至180℃保持12min。丙烯腈样品中7种组分即可全部出峰,总分析时间为30min,比原国标推荐的方法缩短了近50min。     

Liquid-liquid extraction of uranium(VI) with 2-ethylhexyltolylsulfoxide (EHTSO)

The liquid-liquid extraction behavior of 2-ethylhexyltolylsulfoxide (EHTSO) towards uranium(VI) contained in nitric acid aqueous solution has been investigated. It was found that the extraction increases with increasing nitric acid concentration up to 5.0 mol/l and then decreases. Extraction also increases with increasing extractant concentration. The extracted species appears to be UO₂(NO₃)₂ ^.2EHTSO. The influences of temperature, NH₄NO₃ and Na₂C₂O₄ concentrations on the extraction equilibrium were also investigated and the thermodynamic functions of the extraction reaction were obtained.     

2,3,7‐Triazabicyclo[3.3.0]octenes Prepared by Tandem Cascade Reaction of Allyl Azides and Olefinic Dipolarophiles

Tandem cascade reactions of allylazides and olefinic dipolarophiles to give cis‐fused 2,3,7‐triazabicyclo [3.3.0]octenes ( 5, 6 or 7 ) are reported. Therein, an intermolecular dipolar cycloaddition of azide and alkene gave a triazoline which was followed by isomerization of the triazoline to a diazoester ( 4 ) and then an intramolecular dipolar cycloaddition from the diazo functional group and the double bond in 4 to give 5 . Compound 5 may further more undergo a Michael addition to give 7‐substituted‐ 2,3,7‐ triazabicyclo [3.3.0]oct‐2‐ene ( 6 ) or a tautomerization to give 2,3,7‐triazabicyclo[3.3.0]oct‐3‐ene ( 7 ). The reaction may be manipulated to stop at a particular stage by adopting a suit able solvent or an appropriate temperature.     

Photodissociation dynamics of the methyl radical at 212.5 nm: effect of parent internal excitation

Photodissociation dynamics of the CH3 radical at 212.5 nm has been investigated using the H atom Rydberg tagging time-of-flight method with a pure CH3 radical source generated by the photolysis of CH3I at 266 nm. Time-of-flight spectra of the H atom products from the photolysis of both cold and hot methyl radicals have been measured at different photolysis polarizations. Experimental results indicate that the photodissociation of the methyl radical in its ground vibrational state at 212.5 nm excitation occurs on a very fast time scale in comparison with its rotational period, indicating the CH3 dissociation at 212.5 nm occurs on the excited 3s Rydberg state surface. Experimental evidence also shows that the photodissociation of the methyl radical in the nu2 = 1 state of the umbrella mode at 212.5 nm excitation is characteristically different from that in the ground vibrational state.     

覆氧或氧离子轰击下固体表面二次正离子发射的研究

通过对离子轰击下固体表面电离过程重新考虑认为，在固体表面覆氧或氧离子轰击下除表面原子的直接电离外，激发态双原子间电子交换和断键亦起重要作用。在此基础上修正了局部热力学平衡模型，得到了一个包含各类离子内配分函数、电离能、金属－氧原子键断键能以及表面金属原子与氧原子结合份数等参数决定的新电离几率分析表达式。应用该分析表达式解释了金属表面覆氧、氧离子轰击金属、化合物半导体表面二次离子发射中氧增强效应、充氧量对二次离子发射的影响及其基体效应等实验现象。并由此得到了元素相对灵敏度因子的分析表达式，对化合物半导体及一些陶瓷材料表面二次离子质谱分析中元素灵敏度因子随元素电离能变化曲线给予了相应的物理解释。     

流通池光度滴定法应用—络合反应中的质子释放数测定

用具有流通池的分光光度计作测定装置,建立了由平衡移动法测定络合反应中质子释放数的新方法。方法简单、快速,仅用一个标准溶液,适于在变更pH值范围内金属离子不发生水解和没有其他副反应的体系。     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

A rapid method for the determination of methoprene in tobacco by high performance liquid chromatography

Summary A rapid sample preparation procedure combined with a short reversed-phase HPLC separation for the quantitation of methoprene residue in tobacco samples is described. A ground tobacco sample of 0.5 g is mixed with 3 mL of 2-propanol. The mixture is extracted for twelve minutes with the aid of sonication at an elevated temperature (45–55°C) and then filtered through a 0.45 m disposable filter prior to injection on HPLC. No sample cleanup or solvent evaporation step is required. Chromatographic analysis is performed on a C-18 column and the analysis time is 12.5 minutes. The detection limit for methoprene in tobacco samples is one part per million (g/g).