Determination of hexavalent chromium (Cr(VI)) in plastics using organic-assisted alkaline extraction

An organic-assisted alkaline extraction method was developed for the determination of hexavalent chromium (Cr(VI)) in plastics. The solubilization of polymer as a pre-step of the alkaline extraction provided good extraction efficiency of Cr(VI) from the sample. The optimization of the experimental conditions affecting the extraction and UV–vis spectrophotometric analysis was accomplished by evaluating the recovery rate of Cr(VI) through the analysis of Cr(VI) in in-house polymer reference materials (RMs). With the proposed method, most of the Cr(VI) in polymers was released within a short extraction time of 30 min and the Cr(III)-DPCO complex can be kept stable for 24 h. The heating for the extraction of the Cr(VI) was not necessary. The optimal pH of the final solution was fixed at 2.0. The proposed extraction method was applied successfully for the determination of Cr(III) and Cr(VI) in spiked samples. The practical applicability of this new method was evaluated through the analysis of Cr(VI) in in-house polymer RMs. The good linearity was demonstrated at desired concentrations of the range 0–3.3 mg L⁻¹. The detection limits were quite low, varying from 0.0061 to 0.0285 mg L⁻¹. The recovery of Cr(VI) was between 97 and 106%, and the relative standard deviation (R.S.D.) was below 6%.     

Syntheses of new pyridonecarboxylic acid derivatives containing 3-,5- or 6-quinolyl substituents at N-1 and their anti-HIV-RT activities

A series of new pyridonecarboxylic acid derivatives containing 3-, 5- or 6-quinolyl substituents at N-1 were synthesized and their in vitro anti-HIV-RT activities were evaluated. Several compounds in this series showed better activity than Atevirdine.     

Remote detection of double nuclear quadrupole resonance spectra

Remote detection of the spectra of double nuclear quadrupole resonance of nitrogen-containing compounds is considered. A comparison is made of this technique with the cross-relaxation method.     

Synchrotron X-ray scattering study of the mechanism of nanopore generation in nanoporous organosilicate thin films imprinted with a reactive six-armed porogen

In situ grazing incidence small-angle X-ray scattering analysis was successfully performed during the thermal processing of film blends of polymethylsilsesquioxane (PMSSQ) precursor and triethoxysilyl-terminated six-arm poly(epsilon-caprolactone) (mPCL6) porogen. In addition, thermogravimetric analysis of the films was carried out in a nitrogen atmosphere. These measurements provide important information about the structures of the blend films and of the resulting porous films. In particular, they are used in this paper to establish the mechanism of the formation of imprinted pores within the blend films. During the heating run, the sacrificial thermal degradation of the porogen component commenced at 320 degrees C, generating pores in the resulting cured PMSSQ films. Only very limited porogen aggregation occurred during the blend film formation process (spin-coating and subsequent drying), and these porogen aggregates were of relatively small size and narrow size distribution. The observed restriction of the formation of such porogen aggregates was found to result from the favorable hybridization reaction of the porogen's reactive end groups with the reactive functional groups of the PMSSQ precursor, which competes with aggregation via reaction between the porogen molecules. The average radius (or half-size) of the porogen aggregates was in the range 2.45-3.98 nm, depending on the porogen loading (10-40 wt %). The porogen aggregates retained their size and size distribution until thermal degradation, which resulted in the imprinting of nanopores in the cured PMSSQ films with size and size distribution corresponding to those of the porogen aggregates. The porosities of the resulting nanoporous films were in the range 12.4-41.7%, depending on the initial porogen loading.     

Preparation, crystal structure, and thermal stability of the cadmium sulfide nanoclusters Cd6S44+ and Cd2Na2S4+in the sodalite cavities of zeolite A (LTA)

The crystal structure and thermal stability of two cadmium sulfide nanoclusters prepared in zeolite A (LTA) have been studied by XPS, TGA, and single-crystal and powder XRD. The crystal structures of Cd2.4Na3.2(Cd6S4)0.4(Cd2Na2S)0.6(H2O)> or =5.8[Si12Al12O48]-LTA (a = 12.2919(7) A, crystal 1 (hydrated)) and /Cd4Na2(Cd2O)(Na2O)/[Si12Al12O48]-LTA (a = 12.2617(4) A, crystal 2 (dehydrated)) were determined by single-crystal methods in the cubic space group Pm3m at 294(1) K. Crystal 1 was prepared by ion exchange of Na12-LTA in an aqueous stream 0.05 M in Cd2+, followed by washing in a stream of water, followed by reaction in an aqueous stream 0.05 M in Na2S. Crystal 2 was made by dehydrating crystal 1 at 623 K and 1 x 10(-6) Torr for 3 days. In crystal 1, Cd6S4(4+) nanoclusters were found in and extending out of about 40% of the sodalite cavities. Central to each Cd6S4(4+) cluster is a Cd4S4 unit (interpenetrating Cd2+ and S2- tetrahedra with near Td symmetry, Cd-S = 2.997(24) A, Cd-S-Cd = 113.8(12) degrees, and S-Cd-S = 58.1(24) degrees). Each of the two remaining Cd2+ ions bonds radially through a 6-ring of the zeolite framework to a sulfide ion of this Cd4S4 unit (Cd-S = 2.90(8) A). In each of the remaining 60% of the sodalite cavities of crystal 1, a planar Cd2Na2S4+ cluster was found (Cd-S/Na-S = 2.35(5)/2.56(14) A and Cd-S-Cd/Na-S-Na = 122(5)/92(7) degrees). Cd6S4(4+) and Cd2Na2S4+ are stable within the zeolite up to about 700 K in air. Upon vacuum dehydration at 623 K, all sulfur was lost (crystal 2). Instead as anions, only two oxide ions remain per sodalite unit. One bridges between two Cd2+ ions (Cd2O2+, Cd-O = 2.28(3) A) and the other between two Na+ ions (Na2O, Na-O = 2.21(10) A).     

Modulation of Foreign Body Reaction against PDMS Implant by Grafting Topographically Different Poly(acrylic acid) Micropatterns

The surface of poly(dimethylsiloxane) (PDMS) is grafted with poly(acrylic acid) (PAA) layers via surface‐initiated photopolymerization to suppress the capsular contracture resulting from a foreign body reaction. Owing to the nature of photo‐induced polymerization, various PAA micropatterns can be fabricated using photolithography. Hole and stripe micropatterns ≈100‐µm wide and 3‐µm thick are grafted onto the PDMS surface without delamination. The incorporation of PAA micropatterns provides not only chemical cues by hydrophilic PAA microdomains but also topographical cues by hole or stripe micropatterns. In vitro studies reveal that a PAA‐grafted PDMS surface has a lower proliferation of both macrophages (Raw 264.7) and fibroblasts (NIH 3T3) regardless of the pattern presence. However, PDMS with PAA micropatterns, especially stripe micropatterns, minimizes the aggregation of fibroblasts and their subsequent differentiation into myofibroblasts. An in vivo study also shows that PDMS samples with stripe micropatterns polarized macrophages into anti‐inflammatory M2 macrophages and most effectively inhibits capsular contracture, which is demonstrated by investigation of inflammation score, transforming‐growth‐factor‐β expression, number of macrophages, and myofibroblasts as well as the collagen density and capsule thickness.     

Anomalous Hall effect in sputter-deposited CoxTi1−xO2–δ films

Hall effect measurements were performed on epitaxial Co_xTi_1−xO_2–δ thin films grown on (0 0 1) LaAlO₃ by reactive RF magnetron co-sputter deposition. Magnetization measurements reveal ferromagnetic behavior in M–H loop at room temperature for Co_xTi_1−xO_2–δ thin films for which x?0.02. An anomalous Hall effect was observed for Co_0.10Ti_0.90O_2−δ films grown with the partial pressure of water P(H₂O)=4×10⁻⁴ Torr or less. These films exhibit a positive ordinary Hall coefficient and a positive magnetoresistance. X-ray diffraction on films grown under these conditions shows evidence for Ti_nO_2n−1 phase due to the deficiency of oxygen. In contrast, Hall measurements taken for undoped and Co-doped TiO₂ thin films grown under more oxidizing conditions show only the ordinary Hall effect with a negative Hall coefficient consistent with n-type conduction. For these films, the magnetoresistance was positive and increased monotonically with increasing magnetic field. The results suggest that Co-doped Ti_nO_2n−1 may be a dilute magnetic semiconducting oxide for which the carriers couple to the spin polarization.     

Ammonia Oxidation Enhanced by Photopotential Generated by Plasmonic Excitation of a Bimetallic Electrocatalyst

We study how visible light influences the activity of an electrocatalyst composed of Au and Pt nanoparticles. The bimetallic composition imparts a dual functionality: the Pt component catalyzes the electrochemical oxidation of ammonia to liberate hydrogen and the Au component absorbs visible light by the excitation of localized surface plasmon resonances. Under visible-light excitation, this catalyst exhibits enhanced electrochemical ammonia oxidation kinetics, outperforming previously reported electrochemical schemes. We trace the enhancement to a photochemical potential resulting from electron–hole carriers generated in the electrocatalyst by plasmonic excitation. The photopotential responsible for enhanced kinetics scales linearly with the light intensity—a general design principle for eliciting superlative photoelectrochemical performance from catalysts comprised of plasmonic metals or hybrids. We also determine a photochemical conversion coefficient.     

Aggregation of reduced graphene oxide and its nanohybrids with magnetite and elemental silver under environmentally relevant conditions

Journal of Nanoparticle Research - Utilizing solar energy for hydrogen evolution is a great challenge for its insufficient visible-light power conversion. In this paper, we report a facile...