Transition state modeling and catalyst design for hydrogen bond-stabilized enolate formation

[reaction: see text] A catalyst for enolate formation was designed that incorporates an amine base along with a thiourea to bind to the oxygen atom of the substrate and enolate through hydrogen bonding. A computational model of the transition state was developed in which the thiourea (modeled initially as a urea) and amine were separate molecules. This model and models incorporating one or two methanol molecules in place of the urea showed an out-of-plane hydrogen bond, apparently to the carbonyl pi-bond, in addition to an in-plane hydrogen bond to an unshared electron pair. In contrast, optimized complexes of the ketone and the fully formed enolate showed only in-plane hydrogen bonding. The transition state model with the urea and amine was used to define a database search with the computer program CAVEAT to identify structures suitable for linking the amine and urea/thiourea moieties in the transition state. On the basis of a group of structures identified from this search, a flexible but conformationally biased linker was designed to connect the two catalytic moieties. The molecule having the amine and thiourea moieties connected by this linker was synthesized and was shown to catalyze proton exchange between methanol and deuterated acetone. The catalyst was about 5-fold more efficient than the amine and thiourea as separate molecules and relative to a similar but less conformationally biased catalyst.     

Some Properties of Solutions to the Novikov Equation with Weak Dissipation Terms

In this paper, we investigate the Novikov equation with weak dissipation terms. First, we give the local well-posedness and the blow-up scenario. Then, we discuss the global existence of the solutions under certain conditions. After that, on condition that the compactly supported initial data keeps its sign, we prove the infinite propagation speed of our solutions, and establish the large time behavior. Finally, we also elaborate the persistence property of our solutions in weighted Sobolev space.     

热敏电阻温度计的设计与制作

本文介绍了设计性实验“热敏电阻的设计与制作”的实施情况。说明了只要选题合适、要求恰当,设计性实验不仅可行,而且对物理实验训练的总结提高十分有效。     

苯乙烯－甲基丙烯酸共聚物和聚环氧丙烷共混体系的相容性研究

 本文用傅里叶交换红外光谱法（ＦＴＩＲ）表征了苯乙烯－甲基丙烯酸共聚物Ｐ（Ｓ－ＭＡＡ）和聚环氧丙烷（ＰＰｒＯ）共混体系的相容性．用谱带分离的技术比较准确地测定了共混体系中几种羰基的吸光系数比，并且用简明的方法定量计算了它们之间平衡的平衡常数．同时实验还表明共混组分中聚醚的分子量、分子结构、Ｐ（Ｓ－ＭＡＡ）中ＭＡＡ的含量以及共混组分的比例和体系的相容性有密切的关系．     

非晶态镍磷—镍钨磷双层组合镀层的耐蚀性能研究

本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能，分别进行了各种镀层的浸渍腐蚀实验，镀层的Ｘ射线衍射图象、镀层的扫描电镜图象、以及在工厂实际的腐蚀环境里进行的腐蚀实验。实验结果表明镍磷及镍钨磷双层组合镀层的耐 性优于镍磷镀层、镍钨磷镀层的耐蚀性。     

2A12-T6铝合金表面双-(γ-三乙氧基硅丙基)四硫化物薄膜的特性

采用傅立叶变换红外光谱分析了2A12-T6铝合金表面自组装双-(!-三乙氧基硅丙基)四硫化物硅烷偶联剂(SCA)薄膜结构特征,并采用电化学极化曲线评价了薄膜的耐蚀性能.结果表明,铝材表面自然晾干,SCA薄膜分子之间主要通过氢键连接,腐蚀电流密度减小1个数量级以上.120℃的加热处理促进铝板表面通过SiOSi链接而形成SCA网状薄膜结构,并通过在界面上形成SiOAl界面相结构而与铝板表面牢固连接,腐蚀电流密度降低2个数量级以上.SCA乙醇溶液浸泡处理10min比浸泡2s～1min的铝板表面SCA薄膜内氢键缔合羟基要多.     

锌与小儿神经系统及代谢性疾病

综述了锌在小儿神经系统疾病和内分泌代谢性疾病中的作用及临床意义，尤其是对癫痫的发病起重要作用，大量资料证明高锌与癫痫发作有关，其血锌值明显高于健康儿童，因此在治疗中不要轻易补锌。还综述了锌与智能发育障碍、生长发育障碍、多动症、胎儿畸形、遗传性感音神经性聋等疾病的关系及在治疗糖尿病、肝豆状核变性等内分泌和代谢性疾病时要注意维持锌的正常动态平衡。     

反相液相色谱用球形共聚物柱填料

采用新颖聚合工艺制备用于反相高效液相色谱柱填料的乙基苯乙烯-二乙烯苯球形共聚物,不需使用备有高速搅拌的混匀器和特殊的筛析设备,聚合物粒径的95％在3～7μm之间,测算了渗透性、柱效和峰不对称性等柱参数,并通过分离实例说明该填料对胺类、酚类和芳烃类具有优良分离性能。     

表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

手性双氨基醇-Et2Zn催化的不对称直接羟醛缩合反应

以1,3-二溴丙酮和(2'S)-(二苯基羟甲基)-四氢吡咯为原料,合成了两种新型手性氨基醇1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]丙酮(3)和1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]-2-丙醇(4),总产率分别为39%和35%.手性双氨基醇3-/4-Et2Zn可催化未修饰醛、酮的不对称直接羟醛缩合反应,对映体过量最高9%.