Influence of copper solute on the creep rate sensitivities of aluminium

The presence of copper atoms as continuous networks at the grain boundaries of an aluminium-copper alloy has been considered not preventing the moving of dislocations during creep (or at least partially). The dislocations can bs absorbed by these boundaries and penetrate through them. That leads to changés of shape and structure of grains and also to the sliding of grains against each other. This was deduced from the accelerating increase in the sensitivity of the steady state creep rate to the applied stress of an aluminium 2·8 wt% copper alloy examined at wide range of temperatures (50–350 °C) and applied stresses (7–170 MPa). This rapid increase in the sensitivity parameter of the steady state creep rate occurs in Al-Cu alloys at quite higher ranges of applied stresses and may be attributed mainly to the contribution of the grain boundary movements to the creep strain.     

强流脉冲离子束辐照靶及其喷发的数值研究

利用拟合实测的TEMP Ⅱ型加速器磁绝缘二极管(MID)电压波形及其焦点附近束流密度曲线，建立了Gaussian分布模型，据此计算了与靶作用的离子的能量及数量，采用Monte Carlo(MC)方法计算了沉积在靶内的能量.并以此作为热源，与流体动力学(HD)模型相结合，对不同的靶状态采用相应的状态方程，模拟计算了靶内压力演化情况; 同时对烧蚀产生的等离子体采用理想气体状态方程, 结合HD方程组, 模拟计算了喷发过程中压力的空间演化过程. 关键词： 强流脉冲离子束 Gaussian模型 HD方程 数值研究     

Exact soliton solutions of spinor Bose-Einstein condensates

We study matter-wave solitons in Bose-Einstein condensates of ultracold gaseous atoms with spin degrees of freedom and present a class of exact solutions based on the inverse scattering method. The one-soliton solutions are classified with respect to the spin states. We analyze collisional effects between solitons in the same or different spin state(s), which reveals a very interesting possibility: we can manipulate the spin dynamics by controlling the parameters of colliding solitons.     

硬X射线磁圆二色实验方法的建立

在北京同步辐射装置(BSRF)1W1B光束线和XAFS实验站上国内首次建立了硬X射线波段的磁圆二色实验(XMCD)方法. 以单晶金刚石作为相位延迟片, 在透射劳埃(Laue)模式下, 利用衍射双折射效应, 将入射的单色线偏振光转变为相应的左旋和右旋圆偏振光, 测量磁化样品对左旋和右旋圆偏振光吸收的差异, 获得了XMCD信号. 本实验使用透射方法测量了Pt-Fe合金Pt L_2,3边的XMCD, 获得了XMCD信号. XMCD实验方法的建立, 为研究磁性材料尤其是磁性薄膜材料的电子结构和磁结构提供了实验基础.     

3D-TOFSIMS characterization of black spots in polymer light emitting diodes

The occurrence and formation of black spots areas in PolyLED devices has been studied by time-of-flight SIMS (TOFSIMS). The composition, shape and position of the black spots is visualised by three-dimensional (3D)-TOFSIMS depth-profiling. It has been established that the formation of non-emissive spots is due to the growth of aluminium oxide clusters at the AlBa/polymer interface. Electron injection in the black spots is lost by the resulting local increase of the resistivity of the cathode.     

不完全信息群体决策专家权重的集结

本文对于属性权重信息和属性效用信息都不完全的群体多属性决策问题，通过构造属性值区间和运用系统聚类分析法，对群体决策中的专家进行分类，并确定每位专家的权重．     

Specific features of photoisomerization of provitamin D 3 in a nematic liquid crystal

Photoisomerization of provitamin D ₃ (7-dehydrocholesterol) in a nematic liquid crystal (ZLI-1695, Merck) is investigated in detail by UV absorption spectroscopy. It is found that dissolution of chiral molecules of provitamin D ₃ induces the cholesteric phase in a nematic. The spectral kinetics of photoisomerization in this phase changes significantly from that in an ethanol solution. A sharp nonmonotonic dependence of the increase in accumulation of trans isomer tachysterol in a liquid crystal matrix with a decrease in the induced cholesteric pitch from 2200 to 25 μm is revealed.     

Negative molecular ions of azafullerenes and their hydrogenated derivatives

The formation and decay of negative molecular ions of azafullerenes and their hydrogenated derivatives are investigated by mass spectrometry. The mechanisms of resonant electron capture and the lifetimes of negative molecular ions with respect to the electron autodetachment in azafullerene molecules are discussed. A comparative analysis of the data obtained for azafullerenes and hydrogenated fullerene derivatives is carried out.