Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

Investigation of the effects of Au-colloid modification on cobalt hexacyanoferrate film growth and mass transport by electrochemical quartz crystal microbalance

The growth of cobalt hexacyanoferrate (CoHCF) films on bare and Au-colloid-modified electrodes in nitrate or sulfate solutions was monitored by electrochemical quartz crystal microbalance. The average efficiency of CoHCF film growth for Au colloid modified electrodes is 23 and 12 ng cm(-2) s(-1) in KNO3 and K2SO4 solutions, respectively, while those values for the bare gold electrode are 15 and 9 ng cm(-2) s(-1), respectively. In K2SO4 solution, the apparent molar masses for the Au-colloid-modified electrode at lower and higher potential is 58.4 and 37.3 g mol(-1), respectively, which is larger than those for the bare gold electrode (51.7 and 26.3 g mol(-1), respectively). The respective results were also obtained in KNO3 solution. Furthermore, the difference of the apparent molar masses at lower and higher potential for Au-colloid-modified electrodes is smaller than that for bare gold electrodes in the same electrolyte. Additionally, the mechanism of charge propagation is dependent on different anions in electrolyte solutions at higher potentials where the second redox reaction of CoHCF occurs. Therefore, the existence of Au colloids can accelerate CoHCF film growth and weaken the effect of anions on mass transport.     

Density functional theory studies on the Raman and IR spectra of meso-tetraphenylporphyrin diacid

The vibrational spectra of meso-tetraphenylporphyrin diacid (H4TPP2+) have been studied with the density functional theory. Raman and IR spectra of H4TPP2+ and its N-deuterated analogue (D4TPP2+) are measured and compared with the computational results. Complete assignments of observed IR and Raman bands were proposed on the bases of calculation results. The DFT calculations reproduce 140 observed fundamentals with the RMS 8.6 cm-1. The computational as well as the experimental results reveal that the saddle-distortion of porphyrin macrocycle for the diacid leads to a significant effect on its vibrational spectra. Especially, several out-of-plane skeletal modes, which were either unobserved or very weak in the Raman spectra of CuTPP and H2TPP, are activated in the Raman spectra of the diacids. In addition, enhancement for the Raman bands of phenyl CC stretching modes were observed and attributed to the conjugation effect of pi-systems of the phenyl and the porphyrinato macrocycles.     

Silicomolybdate‐Doped PEDOT Modified Electrode: Electrocatalytic Reduction of Bromate and Oxidation of Ascorbic Acid

Electrically conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) film doped with silicomolybdate (SiMo₁₂O₄₀^4? or SiMo₁₂) was synthesized by electrochemical polymerization. The synthesized film is capable of fast charge propagation during redox reactions in strong acid medium 0.2 M H₂SO₄ solution. The modified electrode was used towards reduction of bromate and successfully employed as an amperometric sensor for bromate and also above modified electrode was investigated for ascorbic acid oxidation.     

离子选择电极—流动注射分析法动力学测定葡萄糖存在下的果糖

本文将离子电极与流动注射分析相结合，利用３０℃下，在强碱性介质中，果糖和葡萄糖与２，４－二硝基酚钠反应速度明显差异，动力学测定了葡萄糖存在下果糖的含量。自制了２，４－二硝基酚电极作为动力学电位测定用的工作电极。本法测定果糖的范围为０．０２～１．００ｍｏｌ／Ｌ，其ＲＳＤ为４．０％～４．９％，ＲＥ为１．０～５．０％；当Ｃ葡／Ｃ果≤３倍时，葡萄糖的干扰不超过５％；本法也曾成功地用于果葡萄浆测定，其ＲＳＤ     

A Rapid and Convenient Synthesis of Derivatives of Imidazoles under Microwave Irradiation

An efficient and a quick microwave‐assisted synthesis of benzimidazoles and trisubstituted imidazoles was developed. Three benzimidazoles were obtained as a result of the condensation of 1,2‐phenylenediamine with carboxylic acids and acetoacetic ester without catalyst. A series of trisubstituted imidazoles were synthesized by condensation of benzil, aromatic aldehyde and ammonium acetate in the presence of glacial acetic acid.     

First Total Synthesis of (±)-Aiphanol

Aiphanol was isolated from the seeds of Aiphanes aculeate Willd. (Arecaceae) collected in Peru and was reported to exhibit significant inhibitory activities against cyclooxyge- nases-1 and -2. The structure of aiphanol was elucidated by spectroscopic methods as an unprecedented stilbenolignan skeleton in which a stilbene moiety is linked to a phenylpropane unit through a dioxane bridge1. In our previous works the synthetic approach to 1,4-benzodioxane lignans were achieved2. Since aiphanol…     

铜锌超氧化物歧化酶的金属重组酶的活性部位与组氨酸的相互作用

应用核磁共振和电子自旋共振技术研究了铜锌超氧化物歧化酶（ＣｕＺｎＳＯＤ）的金属重组酶与水溶液中游离组氨酸（Ｈｉｓ）的相互作用。发现在水溶液中ＣｕＺｎＳＯＤ的金属重组酶活性中心的金属可与加入的Ｈｉｓ发生作用而被部分地诱导出来，与Ｈｉｓ形成络合物。     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

不同添加物和制备方式对Al2O3热稳定性的影响

通过水溶液成胶和丙三醇络事助成胶制备了不同的结构的γ－Ａｌ２Ｏ３,研究了Ｌａ,Ｓｉ,Ｂａ以及Ｌａ,Ｓｉ和Ｌａ,Ｂａ双组分改性对它们结构热稳定的作用,讨论了改性元素的引入方式及硅铝比的影响。结果表明,丙三醇络合助成胶能明显提高Ａｌ２Ｏ３的比表面积和孔径,并能显著改善Ａｌ２Ｏ３的热稳定性。