Fast determination of chlorogenic acid in tobacco residues using microwave-assisted extraction and capillary zone electrophoresis technique

In this work, for the first time, capillary zone electrophoresis (CZE) technique combined with microwave-assisted extraction (MAE) was developed for the fast quantification of chlorogenic acid (CA) in tobacco residues. CA in tobacco residue samples were extracted by MAE technique, and then analyzed by CZE. As a new sample preparation method for tobacco residues, the MAE procedure is optimized, validated and compared with conventional methods including ultrasonic extraction (USE) and reflux extraction (RE). It is found that MAE gives the best result due to the highest extraction efficiency within shortest extraction time (only 4.0 min). Here, CA is determined by CZE based on the calibration curve of its authentic standard. The method linearity, detection limit, precision and recovery are studied. The results show that the combined MAE and CZE method has a linearity (R² 0.991, 0.003-0.5 mg ml⁻¹), a limit of detection (0.003 mg ml⁻¹), a limit of quantification (0.01 mg ml⁻¹), good precision (R.S.D. = 4.28%) and a finer recovery (89.0%). The proposed method was successfully applied to the analysis of CA in tobacco residue samples. The experiment results have demonstrated that the CZE combined with MAE is a convenient, fast, economical and reliable method for the determination of CA in tobacco residues.     

高平均功率固体激光功率和光束质量关系研究进展

 固体激光的一个重大发展方向和目标是实现“三高”(高平均功率、高光束质量和高效率)激光同时输出,结合相关研究工作和进展,着重论述了固体激光输出功率和光束质量的关系,给出了功率升高、光束质量非线性下降是当前“三高”固体激光研究的一个基本科学技术问题。围绕这一基本问题,评述了一些重要技术途径和手段,并探讨了实现高平均功率高光束质量固体激光输出的可能有效途径。     

Ag/InP Schottky结热退化机理的研究

Ag/InP Schottky结是制作TE场助光电阴极的关键,本文利用Auger分析技术,详细地研究了热处理对Ag/InPSchottky结界面特性的影响。实验结果表明高温长时间热处理会导致严重界面相互扩散,同时使Schottky结的势垒高度降低,理想因子增大,泡利负电性理论很好地解释了扩散效应。势垒高度的降低及理想因子的增大也是由界面互扩散造成的,这种扩散导致界面特性由Schotthy特性向欧姆性质转化。为防止界面互扩散及Schottky结特性的退化,可选用负电性小的金属制作Schottky结,并在工艺上尽量减少热处理的温度和时间。     

用红外激光脉冲触发半绝缘GaAs光电导开关的实验研究

报道了用光子能量低于GaAs禁带宽度的红外激光脉冲，触发电极间隙为3mm和8mm的半绝缘GaAs光电导开关的实验结果。使用单脉冲能量为1.9mJ的1 064nm Nd:YAG激光触发开关， 在偏置电压分别为3kV和5kV条件下，光电导开关分别工作于线性和非线性模式。用900nm半导体激光器和1 530nm掺铒光纤激光器分别进行触发实验，得到了重复频率分别为5kHz和20MHz的电脉冲波形。结果表明，半绝缘GaAs光电导开关可以吸收大于本征吸收限波长红外激光脉冲。     

关于可交换随机变量序列的重对数律

本文讨论了可交换随机变量序列{Xn:n≥1}的重对数律。     

同轴线方法测量束流耦合阻抗的有效性分析

 根据同轴线方法测量阻抗的原理，用模拟方法讨论了该测量方法的有效性问题。从均匀圆波导和同轴线结构中的电磁场解析分析，说明了该方法有效性问题的起源和基本物理图像，简单回顾其他方法讨论该问题的结论，最后数值模拟分析了同轴线方法测量束流耦合阻抗的有效性，所得主要结论能够对阻抗测量平台的设计提供可靠的依据。     

200℃偶极发射换能器研究

高温偶极子发射换能器是200℃高温多极子阵列声波测井仪器研发需要攻克的主要核心关键技术问题之一。针对这一问题,该文从材料选型和工艺改良两个方面开展技术攻关,研发了耐温达200℃偶极子发射换能器,样机耐温性能测试表明其能够在200℃下连续工作12 h而不损坏,声性能测试样机最大发射电压响应为124 dB,具有与现用换能器相当的辐射性能,样机尺寸及工作频率与现用换能器几乎完全一致,可以方便地对现用仪器进行升级。目前搭载该样机的仪器已经通过孤古8实验井测试,并在新疆顺北油田现场近9000 m井下取得高质量数据,达到设计目的。该文为开展更高温换能器研发提供了详细的研究思路。     

A quick analytical method using direct solid sample introduction and GC-ECD for pesticide residues analysis in crops

In this work, an analytical method for GC using direct solid sample introduction was developed to tackle the problem regarding quick detection of pesticide residue in crops and large-scale screening of samples. 10 mg of the crop solid sample without sample pre-treatment was directly introduced into a modified split/splitless injector for GC analysis. A split/splitless injector was modified to quickly remove oxygen and low boiling-point matrices of the sample. The whole sampling procedure was simple and it required less than 5 min. The experimental parameters including injector-port temperature, removal of oxygen and low boiling point matrices, size and the amount of the solid sample, oven temperature program were studied. Satisfactory recoveries of 6 pesticides (methyl parathion, fenitrothion, aldrin, dieldrin, endosulfan, o,p′-DDT) were obtained in maize and rice sample. Relative standard deviation was less than 15%. Experimental results showed that the proposed method was quick and reliable for pesticide residues analysis in crops.     

High throughput identification of components from traditional Chinese medicine herbs by utilizing graphene or graphene oxide as MALDI-TOF-MS matrix

In this work, graphene or graphene oxide was utilized, for the first time, to identify small molecular components from traditional Chinese medicine (TCM) herbs, by acting as matrix of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Due to the large surface area of graphene or graphene oxide, the analytes were trapped tightly to the matrix, which avoids the contamination of the ion source and vacuum system. Besides, their excellent electronic, thermal and mechanical properties make them desired matrices for MALDI-TOF-MS. Stable analysis was achieved with no background inference even at the concentration of 100 nM. Moreover, the limit of detection (LOD) could be greatly lowered by utilizing graphene or graphene oxide as a pre-enrichment adsorbent. In summary, the promoted MALDI-TOF-MS methodology was demonstrated to be simple, sensitive, fast, cost effective and, most importantly, high throughput.     

Net lateral shift of reflected beam due to surface plasmon resonance in Kretschmann configuration

When surface plasmon resonance is excited in Kretschmann configuration, the maximum Goos–Hänchen shift occurs at the resonant angle which is associated with the minimum value of reflectivity, but the maximum angular shift occurs at two incident angles beside the resonant angle. When the reflected beam is detected at Rayleigh range, the maximum net lateral shift of the reflected beam does not encounter the resonant angle and its magnitude is lager than that of Goos–Hänchen shift. Numerical simulation shows that theory agrees well with numerical results when the beam width is large enough.