Laser-induced damage of Ta2O5/SiO2 narrow-band interference filters under different 1064 nm Nd:YAG laser modes

The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser.     

Vacuum System for HL-2A Tokamak

The vacuum system of today＇s tokamak devices is designed to meet the operational requirements of the experiments. The operation can be divided into five modes, （1） pumping down and leak detecting of the vacuum vessel, （2） baking, （3） plasma-facing component （PFC） conditioning, （4）evacuating and controlling of the particles at plasma edge, （5） plasma discharge experiments.     

一些特殊图类乘积的离散度

连通图的离散度是用s(G)来表示的,s(G)=max{ω(G-S)-|S|:ω(G-S)>1,SV(G)}.给出了两个完全图乘积的和一个完全图与路的乘积的离散度.还给出了两个完全图乘积的坚韧度.     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

一种新化合物K2Ti8O15纳米线

钛酸钾晶须通常是直径和长度在微米量级的无机晶须 ,可用Ｋ2 Ｏ·ｎＴｉＯ2 表示其组成 ,ｎ =1,2 ,4 ,6 ,8,[1] .六钛酸钾晶须具有耐高温、耐腐蚀、纤维拉伸强度高、导热系数小、红外反射率高 ,硬度低的特点 .在民用及工业方面有很多应用 .如催化剂载体、离子吸附交换材料、高温过滤器、绝热材料、耐摩擦材料等[2～ 5] .钛酸钾纳米线的合成尚未见报道 .我们在用电弧产生的Ｎ2 等离子体热解焦油时 ,生成了一种直径 9～ 2 0ｎｍ长约几百纳米线 .Ｘ射线能谱定量分析表明这种纳米线化学组成为Ｋ2 Ｔｉ8Ｏ15,是一种新的非化学计量化合物 .试验装…     

Photoluminescence Characterization of Silicon Nanoparticles Hybridized Europium Complex

A europium complex Eu (DBM)3 TPPO (Eu tris(benzoylmethide)-(triphenylphosphine oxide)) and silicon nanoparticles have been hybridized.The hybridization can evidently change the photoluminescence (PL) characteristics of the Eu complex in the following aspects:under an excitation of 390nm,the intensity of the PL peak at 611nm due to the ^5Du-^7F2 transition of the Eu^3 ions has been increased by 30%,and thc integrated PL intensity in the visible range has been increased by nearly 3 times;the PL excitation efficiency beyond 440nm has been improved cvidently;the peak in the PL excitation spectrum shifts from 408nm to 388nm,and the PL decay time decreases from 2.07 to 0.96μs,The experimental results indicatde that in the PL process,the photoexcited energy may transfer from the silicon nanoparticlcs to the Eu^3 ions.     

Activity coefficients for NaBr in aqueous ternary solutions with sodium propionate and butyrate from EMF measurements

The activity coefficients of NaBr in the NaBr–NaPropionate–H₂O and NaBr–NaButyrate–H₂O systems were determined from EMF measurements at constant total ionic strength of 0.1 0.5 1.0 1.5 2.0 and 2.5 mol-kg^–1 and at 25° C. The activity coefficients were fitted using Scatchard, Pitzer and Lim equations. Finally the excess Gibbs free energy of these mixtures were also calculated.     

基于反向传播神经网络的阻抗断层图像重建新方法

电阻抗成像是通过对物体表面电压、电流的测量来重建物体内部阻抗分布或变化图像的一种新颖计算机断层成像技术。阻抗断层图像重建是一种病态的、非线性的逆问题。提出了一种全新的阻抗断层图像重建方法，它利用反向传播神经网络来表征物体内部阻抗变化位置与物体表面电压变化大小的非线性映射关系，从而可以根据对物体表面测量电压的变化先准确定位阻抗变化区域，再用线性近似方法重建阻抗变化图像，这种方法不仅具有一定的抗噪能力，而且成像精度和空间分辨率都大大好于逆投影方法。