Preparation and evaluation of a large-volume radial flow monolithic column

In this study, a 38 mL monolith with homogeneous porous structure was produced by a single polymerization from glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of porogens and an initiator. The uniform temperature distribution within the reaction system was achieved by adding reactant mixture continuously and enhancing the heat transfer ability of the polymerization system. Homogeneous porous structure in the monolith was proved by SEM and the pore size distribution profiles measured by mercury intrusion porosimetry. Experimental results from proteins separation indicated that the dynamic capacity and resolution of radial flow monolithic column were independent of flow rates. Furthermore, the pressure drop on the column was linearly dependent on the flow rate and did not exceed 1.7 MPa even at a flow rate of 50 mL/min, which proved that the prepared monolith could be used in the quick separation and preparation of biopolymers.     

Fabrication and characterization of hexagonal mesoporous silica monolith via post-synthesized hydrothermal process

Large-sized, optical transparent mesostructured Brij 56/silica monolith has been fabricated using a lyotropic liquid crystal of Brij 56 (C₁₆EO₁₀) as a template and TMOS as a silica source, combined with a optimizing sol-gel process and a hydrothermal aging process. By programmed temperature drying and calcinations, translucent mesoporous silica monolith with two-dimensional hexagonal structure (P6mm) has bee obtained. The ordered mesoporous silica monoliths have been characterized by small-angle X-ray diffraction, transmission electron microscopy (TEM), and nitrogen adsorption, which shows that the materials have a highly ordered two-dimensional hexagonal mesostructure with the high specific surface area of 837 m² · g⁻¹ and narrow pore distribution with a mean BJH pore diameter of 2.73 nm. Based on calculations and differential scanning calorimetry and thermogravimetric analyses, the action mechanism of the hydrothermal aging process has been proposed: the 100°C hydrothermal conditions and autogenous 2.3 atm pressure promote the condensation and dehydration of silanol groups, with the result that cross-linking degree, the flaws and moisture content in gels are reduced notably. Those processes guarantee the integrity of gels in the following drying process.     

微波辐射下苯偶姻的干法氧化反应

研究了微波辐射下干法氧化苯偶姻生成苯偶酰的反应。结果表明，硅胶和酸性氧化铝是本反应的良好载体，空气是良好的氧化剂。在较短时间内(8～15min)即可获得很高的产率(92%～98%)，为一种有效的苯偶姻氧化反应新方法。     

Reaction from isomeric parent ions in the dissociation of dimethylpyrroles

The major dissociation pathways of the [M-H]⁺ (loss of NH₃ or CH₄) and the [M+H]⁺ (loss of NH₃ or CH₃) ions from dimethylpyrroles have been determined to occur from isomeric parent ions. For the [M-H]⁺ ion (formed by loss of a methyl hydrogen), loss of NH₃ leads to the formation of the phenylium ion and is preceded by consecutive carbon ring expansions followed by a ring contraction to form protonated aniline. Loss of CH₄ occurs after the first carbon ring expansion, which forms protonated picoline. The relative partitioning between the two dissociation paths depends upon the internal energy content of the parent ion; the highest point on the potential energy surface is the second ring expansion step. The [M+H]⁺ ion reacts through a similar pathway via dihydro analogs of picoline and aniline. The proposed reaction pathways are supported by results of semiempirical molecular orbital calculations.     

Structure and electrical properties of Pb(Zr<Subscript>0.25</Subscript>Ti<Subscript>0.75</Subscript>)O<Subscript>3</Subscript> thin films on LaNiO<Subscript>3</Subscript>—Coated thermally oxidized Si substrates

Pb(Zr_0.25Ti_0.75)O₃ (PZT25) thin films were prepared on LaNiO₃-coated thermally oxidized silicon substrates by chemical solution deposition method, where LaNiO₃ electrodes were also prepared by a chemical solution deposition technique. The dielectric constant and dielectric loss of the PZT25 thin films were 570 and 0.057, respectively. The remanent polarization and coercive field were 20.11 μC/cm² and 60.7 kV/cm, respectively. The PZT25 thin films on LaNiO₃-coated thermally oxidized silicon substrates showed improved fatigue characteristics compared with their counterparts on plantium-coated silicon substrates.     

Determination of protein by its enhancement effect on the Rayleigh light scattering of carboxyarsenazo

This is the first report on the determination of proteins based on the interaction with carboxyarsenazo (CAA) by Rayleigh light scattering (RLS). At pH 4, the weak RLS of CAA can be enhanced greatly by the addition of proteins, resulting in three characteristic peaks. Based on this, the interactions of CAA with nine kinds of proteins were studied and a new quantitative determination method for proteins has been developed. This method is very sensitive (0.10-15.3 mug ml(-1) for bovine serum albumin (BSA)), rapid (<2 min), simple (one step), tolerant of most interfering substances, and gives a close value to that of the Coomassie brilliant blue (CBB) method in the determination of proteins in human serum. Thus, the CAA assay can be useful for routine analytical purposes and may overcome some of the limitations of other currently employed methods. Mechanism studies show that the three RLS peaks correspond to the absorption valleys of the CAA-protein complex.     

Structure and Thermal Stability of a Novel 2‐D Layered Copper(II) Coordination Polymer with the Bidentate Ligand 1, 2, 4‐Triazol‐5‐one

Single crystals of {[Cu(TO)₂(H₂O)₂](NO₃)₂}_n (TO: 1, 2, 4‐triazol‐5‐one) were grown by slow evaporation from aqueous solution. It crystallizes in the orthorhombic space group Pbca, with a = 7.082(1), b = 10.285(1), c = 17.911(3)Å, V = 1304.6(3)ų, Z = 4. The Cu^II distorted octahedra are bridged by bidentate TO ligands into infinite 2‐D interlaced rhombic grid‐like network planes, {[Cu(TO)₂(H₂O)₂]²⁺}_n. Hydrogen bonds, electrostatic interactions, and weak van der Waals' forces assemble these planes and the NO₃^— anions to a layered structure. The title compound decomposes at 153.4 °C to the final products, Cu(CN)₂ and CuO.     

Synthesis of New Spiropyrans With a Polyaromatic or Heteroaromatic Pendant and Their Photochromic Bedhaviors

A series of spiropyrans with a polyaromatic or heteroaromatic pendant was synthesized conveniently.Their photochromic behaviors were investigated with the aid of absorption spectral measurements.The results indicated that the compounds with the same parent spiropyran but different aromatic pendant show significantly different photochromic properties.This may be due to the π-π orbital interaction between the polyaromatic pendant and the open photomerocyanine form of spiropyran.The results obtained are very useful in the molecule design area.     

Nd-Fe-B alloy-densified agarose gel for expanded bed adsorption of proteins

Novel dense composite adsorbents for expanded bed adsorption of protein have been fabricated by coating 4% agarose gel onto Nd-Fe-B alloy powder by a water-in-oil emulsification method. Two composite matrices, namely Nd-Fe-B alloy-densified agarose (NFBA) gels with different size distributions and densities, NFBA-S (50-165 microm, 1.88 g/ml) and NFBA-L (140-300 microm, 2.04 g/ml), were produced. Lysozyme was used as a model protein to test the adsorption capacity and kinetics for the NFBA gels modified by Cibacron blue 3GA (CB-NFBA gels). Liquid-phase dispersion behavior in the expanded beds was examined by measurements of residence time distributions, and compared with that of Streamline SP (Amersham-Pharmacia Biotech, Sweden). The dependence of axial mixing in the expanded beds on flow velocity, bed expansion degree. settled bed height, and viscosity of liquid phase was investigated. Breakthrough curves of lysozyme in the expanded beds of the CB-NFBA gels were also examined. The dynamic binding capacity at 5% breakthrough was 23.3 mg/ml matrix for the CB-NFBA-S gels, and 16.7 mg/ml matrix for the CB-NFBA-L, at a flow velocity of 220 cm/h. The results indicate that the NFBA gels are promising for expanded bed adsorption of proteins.