Quasi-stadium laser diodes with an unstable resonator condition

We have observed lasing in a complicated eigenmode of a quasi-stadium laser diode with an unstable resonator consisting of two curved end mirrors obeying an unstable resonator condition and two straight sidewall mirrors. The laser was fabricated by application of a reactive-ion-etching technique to a molecular beam epitaxy-grown graded-index separate-confinement heterostructure single-quantum-well GaAs/AlGaAs structure. The far-field pattern shows that the lasing mode corresponds to the complicated lowest-loss mode obtained numerically by an extended Fox-Li method.     

Mechanism of an alcohol-trapping reaction in the direct and benzophenone-sensitized photodenitrogenation of a spiroepoxy-substituted azoalkane: solvent effects and stereochemical deuterium labeling

The spin-state-dependent reactivity, singlet versus triplet, of the 2-spiroepoxy-1,3-cyclopentane-1,3-diyl DR2 has been assessed through alcohol-trapping reactions for which the effect of solvent acidity on the product distribution of the alcohol trapping products 2 versus 3 + 4 and stereochemical deuterium-labeling studies have been performed. The proposed mechanism for the solvent effect on the product ratio (2/3 + 4) reveals the importance of the hydrogen-bonded intermediates I1 and I2 in the trapping reactions; the stereochemical deuterium-labeling results clarify the dipole structure trapped by the alcohol. The dipoles DP1 and DP2, in which the configuration between the epoxide oxygen and the deuterium atoms is retained, are inferred for the direct photodenitrogenation reactions (singlet state), whereas for the benzophenone-sensitized photoreactions (triplet state), after ISC, the ring-opened dipole DP3 is implied as the intermediate that is trapped by the alcohol.     

Measurement of Masseteric Oxygenation by Near-Infrared Spectroscopy during Chewing

To non-invasively determine the condition of the masticatory muscles during chewing in real time, we used near-infrared spectroscopy and measured the masseter muscle. It increased in size, while the deoxy Hb in this muscle experienced the change in the short cycle by chewing. Periodic change of deoxy Hb was in agreement with the vertical movement of the lower jaw. It was found that the amount of increase in the deoxy Hb differs depending on the hardness of food being chewed. Moreover, by carrying out simultaneous measurement of the masseter muscles on both side of the jaw it was possible to determine the predominant muscles currently used in chewing.     

Functionalized pyrolytic highly oriented graphite polymer film for surface‐assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low‐mass analytes in environmental analysis by surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI‐MS using oxidized PGS (PGS‐SALDI‐MS) can be used to detect [M–H]^? ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten‐fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS‐SALDI‐MS and the calibration curve showed a wide linear dynamic range of response (20–1000 ppb). The combination of atmospheric pressure ionization and PGS (AP‐PGS‐SALDI) showed greater signal intensity than vacuum PGS‐SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4‐hydroxy‐2‐chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS‐SALDI‐MS. In addition, we found that nonafluoro‐1‐butanesulfonic acid was able to produce protonated peptides in positive ion PGS‐SALDI‐MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of buried Si(1 1 1)-5 × 2-Au by surface X-ray diffraction

The structure of buried Si(1 1 1)-5 × 2-Au capped with amorphous Si was investigated using surface X-ray diffraction. It was found that the 5 × 2 structural periodicity is kept under the amorphous Si from the in-plane measurement. Furthermore, the intensity variation along the fractional-order rod indicates that Au atoms are located almost on the same plane.     

Explosion hazards of ion exchange resin mixed with perchloric acid

On January 21, 2003, an explosion occurred while ion exchange resin (IER) was being used to separate impurities from uranium solution. To clarify the cause of the accident and go/no-go criteria of the explosion, elemental analysis of the IER, DSC analysis, and SIKAREX analysis (a screening tool for runaway reactions) were performed. Finally, experiments on the same scale as the accident were conducted in an explosion chamber. When HClO₄ was added to IER-NO₃, the IER violently exploded without any heating nor metal ions such as uranium. It was confirmed that the accident was caused by an incorrect procedure in the chemical process. From the standpoint of explosion safety, IER-NO₃ in particular should be kept away from perchloric acid in the laboratory.     

Development of 1,3a,6a-triazapentalene-labeled enterobactin as a fluorescence quenching sensor of iron ion

1,3a,6a-Triazapentalene (TAP)-labeled enterobactin was developed as an iron ion sensor. 3-Acetylated-TAP was successfully introduced to the catechol ring of enterobactin, a well-recognized siderophore secreted by various Gram-negative bacteria. The fluorescence of TAP-labeled enterobactin decreased gradually as the amount of Fe³⁺ ion as an additive was increased, and 1.2 equiv of Fe³⁺ ion completely quenched the fluorescence. In clear contrast, when other metal ions were used, the fluorescence of TAP-labeled enterobactin remained even at 5.0 equiv.     

Impact of operational changes on the scaling factors of radioactive wastes from the IEA-R1 research reactor

Nowadays, the scaling factor methodology is widely used in order to estimate the activity concentration of difficult to measure nuclides in low- and intermediate-level waste from nuclear reactors. However, very few experimental studies evaluate how operational changes in the reactors affect scaling factors. The present work examines the impact of operational changes on the scaling factors that were determined for spent ion-exchange resins and spent activated charcoal permanently withdrawn as radioactive wastes from the water cleanup system of the IEA-R1 nuclear research reactor.     

Pneumatic handling of droplets on-demand on a microfluidic device for seamless processing of reaction and electrophoretic separation

Sequential operations of pre-separation reaction process by picoliter droplets and following electrophoretic separation process were realized in a single microfluidic device with pneumatic handling of liquid. The developed device consists of a fluidic chip made of PDMS, an electrode substrate, and a temperature control substrate on which thin film heater/sensor structures are fabricated. Liquid handling, including introduction of liquid samples, droplet generation, and merging of droplets, was implemented by pneumatic manipulation through microcapillary vent structures, allowing air to pass and stop liquid flow. Since the pneumatic manipulations are conducted in a fully automated manner by using a programmable air pressure control system, the user simply has to load liquid samples on each liquid port of the device. Droplets of 420 pL were generated with an accuracy of ± 2 pL by applying droplet generation pressure in the range of 40-100 kPa. As a demonstration, a binding reaction of a 15 mer ssDNA with a peptide nucleic acid oligomer used as an oligoprobe followed by denaturing electrophoresis to discriminate a single-base substitution was performed within 1.5 min. By exploiting the droplet-on-demand capability of the device, the influence of various factors, such as reaction time, mixing ratio and droplet configurations on the ssDNA-peptide nucleic acid binding reaction in the droplet-based process, was studied toward realization of a rapid detection method to discriminate rapid single-base substitution.