Orbital fluctuations and orbital flipping in RVO3 perovskites

The effect of the average R-site ionic radius IR and variance on the orbital and magnetic order in R3+-doped YVO3 was studied in Y1-xLaxVO3 and Y1-x(La0.2337Lu0.7663)xVO3 with fixed IR. The orbital flipping temperature T{CG} increases nonlinearly with increasing R-site variance, indicating that the V-O-V bond angle is not the primary driving force stabilizing the C-type orbitally ordered phase. The suppressed thermal conductivity in the G-type orbitally ordered phase signals some remaining orbital randomness that is enhanced by t{2} and et hybridization in {3}T{1g} site symmetry.     

Kinetics and equilibria of cis/trans isomerization of backbone amide bonds in peptoids

The biological activities of N-substituted glycine oligomers (peptoids) have been the subject of extensive research. As compared to peptides, both the cis and trans conformations of the backbone amide bonds of peptoids can be significantly populated. Thus, peptoids are mixtures of configurational isomers, with the number of isomers increasing by a factor of 2 with each additional monomer residue. Here we report the results of a study of the kinetics and equilibria of cis/trans isomerization of the amide bonds of N-acetylated peptoid monomers, dipeptoids, and tripeptoids by NMR spectroscopy. Resonance intensities indicate the cis conformation of the backbone amide bonds of the peptoids studied is more populated than is generally the case for the analogous secondary amide bond to proline residues in acyclic peptides. Rate constants were measured by inversion-magnetization transfer techniques over a range of temperatures, and activation parameters were derived from the temperature dependence of the rate constants. The rate of cis/trans isomerization by rotation around the amide bonds in the peptoids studied is generally slower than that around amide bonds to proline residues and takes place on the NMR inversion-magnetization transfer time scale only by rotation around the amide bond to the C-terminal peptoid residue.     

New members of a class of iron-thiolate-nitrosyl compounds: trinuclear iron-thiolate-nitrosyl complexes containing Fe(3)S(6) core

The neutral trinuclear iron-thiolate-nitrosyl, [(ON)Fe(mu-S,S-C(6)H(4))](3) (1), and its oxidation product, [(ON)Fe(mu-S,S-C(6)H(4))](3)[PF(6)] (2), were synthesized and characterized by IR, X-ray diffraction, X-ray absorption, electron paramagnetic resonance (EPR), and magnetic measurement. The five-coordinated, square pyramidal geometry around each iron atom in complex 1 remains intact when complex 1 is oxidized to yield complex 2. Magnetic measurements and EPR results show that there is only one unpaired electron in complex 1 (S(total) = 1/2) and no unpaired electron (S(total) = 0) in 2. The detailed geometric comparisons between complexes 1 and 2 provide understanding of the role that the unpaired electron plays in the chemical bonding of this trinuclear complex. Significant shortening of the Fe-Fe, Fe-N, and Fe-S distances around Fe(1) is observed when complex 1 is oxidized to 2. This result implicates that the removal of the unpaired electron does induce the strengthening of the Fe-Fe, Fe-N, and Fe-S bonds in the Fe(1) fragment. A significant shift of the nuNO stretching frequency from 1751 cm(-1) (1) to 1821, 1857 cm(-1) (2) (KBr) also indicates the strengthening of the N-O bonds in complex 2. The EPR, X-ray absorption, magnetic measurements, and molecular orbital calculations lead to the conclusion that the unpaired electron in complex 1 is mainly allocated in the Fe(1) fragment and is best described as {Fe(1)NO}7, so that the unpaired electron is delocalized between Fe and NO via d-pi* orbital interaction; some contributions from [Fe(2)NO] and [Fe(3)NO] as well as the thiolates associated with Fe (1) are also realized. According to MO calculations, the spin density of complex 1 is predominantly located at the Fe atoms with 0.60, -0.15, and 0.25 at Fe(1), Fe(2), and Fe(3), respectively.     

Synthesis and characteristics of macroporous epoxy resin-triethylenetetramine polymer modified by sodium chloroacetate for copper chelation in aqueous solution

A novel macroporous resin was prepared from an epoxy resin and triethylenetetramine (TETA) via a polymerization using micro-phase separation. In this novel method the polyethylene glycol (PEG-400) was used as solvent in the initial stage and a phase-separation reagent at later stage of the polymerization was firstly adopted. The resin was modified by sodium chloroacetate and the carboxyl groups were introduced. Its structure was characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM), respectively. The adsorption-desorption characteristics of the resin for Cu(II) in aqueous solution were investigated in detail using ICP-AES. The interaction between the metal ion and the resin was found to be depended upon the acidity of the medium. The prepared resin is strongly chelating and exhibits a chelating ability that can remove cupric ion in waste water treatment.     

Four new nonaoxygenated C18 dibenzocylcooctadiene lignans from Kadsura philippinensis

Four new nona-oxygenated C18 dibenzocyclooctadiene lignans, kadsuphilins C-F (1-4), were isolated from the EtOAc soluble portion of the alcoholic extract of the aerial parts of Kadsura philippinensis. The structures of 1-4 were elucidated on the basis of extensive spectroscopic analyses, including 2D NMR (HMQC, HMBC, and NOESY) experiments, comparison of the spectral data with those of the related metabolites. The stereochemistries of the biphenyl and octadiene moieties were deduced from circular dichorism (CD) and the NOESY spectra, respectively. The in vitro antiplatelet aggregation activity of metabolites 1-4 also have been evaluated.     

HPLC method for preliminary analysis of constituents in rat blood after oral administration of the extract of Acanthopanax senticosus

An HPLC with SPE method has been developed for analysis of constituents in rat blood after oral administration of the extract of Acanthopanax senticosus (ASE). The plasma sample was prepared by SPE method equipped with Oasis HLB cartridge (3cc, 60 mg). The analysis was performed on a Dikma Diamonsil RP(18) column (4.6 mmx150 mm, 5 microm) with the gradient elution of solvent A (ACN) and solvent B (0.1% aqueous phosphoric acid, v/v) and the detection wavelength was set at 270 nm. The calibration curve was linear over the range of 0.156-15.625 microg/mL. The LOD was 60 ng/mL. The intraday precision was less than 5.80%, and the interday precision was less than 6.0%. The recovery was (87.30 +/- 1.73)%. As a result, 19 constituents were detected in rat plasma after oral administration of the ASE, including 11 original compounds in ASE and eight metabolites, and three of the metabolites originated from syringin in ASE. Six constituents were identified by comparing with the corresponding reference compounds.     

The influence of substituents (R) at the C carbon on bonding properties of thiosemicarbazones {RC(H)N-NH–C(S)–NH2} in palladium(II) complexes

Reactions of the trans-PdCl₂(PPh₃)₂ precursor with furan-2-carbaldehyde thiosemicarbazone (Hftsc) and thiophene-2-carbaldehyde thiosemicarbazone (Httsc), in 1:1 molar ratios in the presence of Et₃N base, removed one Cl and one PPh₃ group from the Pd^II center, and yielded the complexes [Pd(η²-N³,S-ftsc)(PPh₃)Cl] (1) and [Pd(η²-N³,S-ttsc)(PPh₃)Cl] (2), respectively. However, when a 1:2 molar ratio (M:L) was used, both Cl and PPh₃ ligands were removed, yielding the complexes trans-[Pd(η²-N³,S-ftsc)₂] (3) and trans-[Pd(η²-N³,S-ttsc)₂] (4). Complexes 1–4 have been characterized with the help of analytical data, spectroscopic techniques (IR, ¹H and ³¹P NMR) and single crystal X-ray crystallography. The thiosemicarbazone ligands behave as uninegative N³,S-chelating ligands in complexes 1–4. In contrast, pyrrole-2-carbaldehyde thiosemicarbazone (H₂ptsc) and salicylaldehyde thiosemicarbazone (H₂stsc) invariably formed the complexes [Pd(η³-N⁴,N³,S-ptsc)(PPh₃)] (5) and [Pd(η³–O, N³,S-stsc)(PPh₃)] (6), respectively, and the ligands acted as binegative tridentate donors (N⁴, N³, S, 5; O, N³, S, 6).     

Layer-by-layer assembled films of cellulose nanowires with antireflective properties

Natural nanowires (NWs) of cellulose obtained from a marine animal tunicate display surprisingly high uniformity and aspect ratio comparable with synthetic NWs. Their layer-by-layer assembled (LBL) films show strong antireflection (AR) properties having an origin in a novel highly porous architecture reminiscent of a "flattened matchsticks pile", with film-thickness-dependent porosity and optical properties created by randomly oriented and overlapping NWs. At an optimum number of LBL deposition cycles, light transmittance reaches nearly 100% (lambda approximately 400 nm) when deposited on a microscope glass slide and the refractive index is approximately 1.28 at lambda = 532 nm. In accordance with AR theory, the transmittance maximum red-shifts and begins to decrease after reaching the maximum with increasing film thickness as a result of increased light scattering. This first example of LBL layers of cellulose NWs can be seen as an exemplary structure for any rigid axial nanocolloids, for which, given the refractive index match, AR properties are expected to be a common property. Unique mechanical properties of the tunicate NWs are also a great asset for optical coatings.     

Importance of flue gas cooling conditions in particulate matter formation during biomass combustion under conditions pertinent to pulverized fuel applications

Laboratory-scale experiments pertinent to pulverised fuel (PF) combustion are often carried out in drop-tube furnaces (DTFs) at air-fuel equivalence ratios and cooling rate for quenching flue gas that are much higher than those in PF boilers. This paper reports the effect of flue gas cooling conditions on the properties of PM with aerodynamic diameter of <10 µm (PM₁₀) from biomass combustion. This study considers four cooling rates (1000, 2000, 6000 and 20,000 °C/s) and two biomass feeding rates (0.05 and 0.25 g/min) that represents flue gases with significantly-different concentrations of inorganic vapours. The PSDs of PM₁₀ have a bimodal distribution with a fine mode within PM with aerodynamic diameter of <1 µm (PM₁) and a coarse mode within PM with aerodynamic diameter of 1–10 µm (PM_1–10). All experimental conditions produce PM₁₀ with similar PM₁ and PM_1–10 yields (～0.8 and ～1.6 mg/g_biomass, respectively) and similar coarse mode diameters (i.e. 6.863 µm). However, at a biomass feeding rate of 0.05 g/min, the fine mode diameter shifts from 0.022 to 0.077 µm when the cooling rate decreases from 20,000 to 1000 °C/s, indicating more profound heterogeneous condensation at a lower cooling rate. As the biomass feeding rate increases to 0.25 g/min, the fine mode diameter further shifts to 0.043 µm and at 20,000 °C/s but remained at 0.077 µm at 1000 °C/s though a clear shift of PSD to larger diameters is evident. These are attributed to enhanced heterogeneous condensation and coagulation of small particulates resulting from increased particle population density in hot flue gas. Chemical analyses show PM₁ contains dominantly volatile elements (i.e. Na, K and Cl) while PM_1–10 consists of mainly Ca. Similar trends are also observed for elemental PSDs and yields. It is also observed that slow cooling of hot flue gas leads to an increased yield of Cl in PM_1–10 due to enhanced chlorination of Ca species.     

Blocking the Formation of Zn2+/Dye Complexes in Dye-Sensitized Solar Cells by Inserting CdS Quantum Dots into Sandwich Layer

Russian Journal of Physical Chemistry A - ZnO NRAs are grown on ITO substrates by a simple chemical method. CdS QDs were deposited on ZnO NRAs by SILAR. N719 was synthesized by dipping method....