Investigation of radon and thoron concentrations in a landmark skyscraper in Tokyo

The temporal variation of the radon concentration, and the radon and thoron concentrations every 3 months for a year were measured using two types of devices in a landmark skyscraper, the Tokyo Metropolitan Government Daiichi Building. In the measurement of temporal variation of the radon concentration using a pulse type ionization chamber, the average radon concentration was 21 ± 13 Bq m^?3 (2–68 Bq m^?3). The measured indoor radon concentration had a strong relationship with the operation of the mechanical ventilation system and the activities of the office workers. The radon concentration also increased together with temperature. Other environmental parameters, such as air pressure and relative humidity, were not related to the radon concentration. In the long-term measurements using a passive radon and thoron discriminative monitor, no seasonal variation was observed. The annual average concentrations of radon and thoron were 16 ± 8 and 16 ± 7 Bq m^?3, respectively. There was also no relationship between the two concentrations. The annual average effective dose for office workers in this skyscraper was estimated to be 0.08 mSv y^?1 for 2000 working hours per year. When considering the indoor radon exposure received from their residential dwellings using the annual mean radon concentration indoors in Japan (15.5 Bq m^?3), the annual average effective dose was estimated to be 0.37 mSv y^?1. This value was 31 % of the worldwide average annual effective dose.     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Application of plug–plug technique to ACE experiments for discovery of peptides binding to a larger target protein: A model study of calmodulin‐binding fragments selected from a digested mixture of reduced BSA

To discover peptide ligands that bind to a target protein with a higher molecular mass, a concise screening methodology has been established, by applying a “plug–plug” technique to ACE experiments. Exploratory experiments using three mixed peptides, mastoparan‐X, β‐endorphin, and oxytocin, as candidates for calmodulin‐binding ligands, revealed that the technique not only reduces the consumption of the protein sample, but also increases the flexibility of the experimental conditions, by allowing the use of MS detection in the ACE experiments. With the plug–plug technique, the ACE–MS screening methodology successfully selected calmodulin‐binding peptides from a random library with diverse constituents, such as protease digests of BSA. Three peptides with K_d values between 8–147 μM for calmodulin were obtained from a Glu‐C endoprotease digest of reduced BSA, although the digest showed more than 70 peaks in its ACE–MS electropherogram. The method established here will be quite useful for the screening of peptide ligands, which have only low affinities due to their flexible chain structures but could potentially provide primary information for designing inhibitors against the target protein.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

Synthesis and properties of novel crown ether-annelated 4′,5′-diaza-9′-(1,3-dithiole-2-ylidene)-fluorenes and their ruthenium(II) complexes

Two novel redox-active 1,3-dithiole (DT) ring-fused 4,5-diazafluorene ligands with crown ether moieties (L1 and L2) were synthesized and characterized. The crystal structure of L1 was studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding bis(bipyridine)ruthenium(II) complexes [4: Ru L1(bpy)₂ and 5: Ru L2(bpy)₂], were also been investigated.     

Phase-locked laser system for a metastable states qubit in 40 Ca+

We describe the development of a phase-locked laser system tailored to an ion-trap-based quantum information processor with (40)Ca(+). Laser outputs from an extended cavity diode laser and a Ti:sapphire laser with output laser wavelengths of approximately 850 and 854 nm, respectively, were phase locked and used to excite a Raman transition between the D(3/2) and D(5/2) metastable states qubit. Development and the performance of the laser system are described. We also compare the characteristics and the benefits of the developed qubit coupling with those in the conventional approaches.     

Observation of Unusual Molecular Diffusion Behaviour below the Lower Critical Solution Temperature of Water/2‐Butoxyethanol Mixtures by using Fluorescence Correlation Spectroscopy

The effect of solute affinity on solute diffusion in binary liquids well below the lower critical solution temperature (LCST) was studied by using fluorescence correlation spectroscopy. We measured the hydrodynamic radii of a hydrophobic and an amphiphilic fluorescent dye under systematic variation of the relative molar fractions of water/2‐butoxyethanol and, for comparison, of water/methanol mixtures, which do not show phase separation. We found that the apparent hydrodynamic radius of the hydrophobic dye almost doubled in water/2‐butoxyethanol, whereas it remained largely unchanged for the amphiphilic dye and in water/methanol mixtures. Our results indicate that the translational diffusion of solutes is influenced by transient local solution structures, even at temperatures well below the LCST. We conclude that, even far below LCST, different solutes can experience different environments in binary liquid mixtures depending on both the solute and solvent properties, all of which impact their reactivity.     

Total synthesis of (S)-(+)-ent-phomapyrones B and surugapyrone B

Phomapyrone B ( 1 ), the 2-pyrones isolated from the phytopathogenic fungus Leptosphaeria maculans, has been synthesized as the enantiomeric form starting from (S)-2-methylbutanol ( 4 ). Surugapyrone B ( 3 ) isolated from Streptmyces sp. USF-6280 as an antioxidant has also been synthesized as a natural form. The absolute configuration of phomapyrone B ( 1 ) was estimated to be the (R)-form and that of surugapyrone B ( 3 ) being the (S)-form. A series of 2-pyrone derivatives 17 have been synthesized through the established procedure and their DPPH radical-scavenging activities have also been evaluated.     

Label‐Free Imaging of Intracellular Temperature by Using the O−H Stretching Raman Band of Water

We propose a label‐free method for measuring intracellular temperature using a Raman image of a cell in the O?H stretching band. Raman spectra of cultured cells and the medium were first measured at various temperatures using a Raman microscope and the intensity ratio of the two regions of the O?H stretching band was calculated. The intensity ratio varies linearly with temperature in both the medium and cells, and the resulting calibration lines allow simultaneous visualization of both intracellular and extracellular temperatures in a label‐free manner. We applied this method to the measurement of temperature changes after the introduction of FCCP (carbonyl cyanide‐p‐trifluoromethoxyphenylhydrazone) in living cells. We observed a temperature rise in the cytoplasm and succeeded in obtaining an image of the change in intracellular temperature after the FCCP treatment.     

Multiple Fused Anthracenes as Helical Polycyclic Aromatic Hydrocarbon Motif for Chiroptical Performance Enhancement

Polycyclic aromatic hydrocarbons consisting of three fused anthracene units were designed as new π‐conjugated compounds having helical structures. These expanded helicenes were synthesized by Pt‐catalyzed cycloisomerization of the corresponding ethynyl‐substituted precursors. The nonplanar and helical structure was confirmed by X‐ray analysis and DFT calculations, and the barrier to helical inversion was estimated to be 34 kJ mol^?1. The enantiomers of the diphenyl derivative were successfully resolved by chiral HPLC. Enantiopure samples showed good chiroptical performance in the CD (|Δ?| 1380 L mol^?1 cm^?1) and CPL (|g_lum| 0.013) spectra, and these values were considerably large for simple organic molecules. The unique chiroptical properties are discussed on the basis of the molecular structure and the electronic state with the aid of time‐dependent DFT calculations.