两个双核铁（Ⅲ）和三足配体的配合物的合成和晶体结构

运用三足四齿配体三（2－甲基吡啶）胺（TPA）或三（2－甲基苯丙咪唑）胺（TBA）,得到两个双核铁(III)配合物，[Fe₂L₂(μ₂-O)(μ₂-p-NH₂-C₆H₄COO)]³⁺ (L = TPA, 1 和 L = TBA, 2)。两个配合物均为单斜晶系，空间群为P2(1)/c.晶胞参数 1: a = 1.4529(4), b = 1.6622(5), c = 2.0625(6) nm, β= 100.327(5)º, V = 4.900(3) nm³, z = 4, F(000) = 2344, 分子量M_r = 1142.91, Dc = 1.549 g/cm³, R₁ = 0.0544, R₂ = 0.0962. 2: a = 1.3378(4), b = 2.1174(7), c = 2.4351(7) nm, β= 97.315(6)º, V = 6.842(4) nm³, z = 4, F (000) = 3116, 分子量M_r = 1505.08, Dc = 1.444 g/cm³, R₁ = 0.0793, R₂ = 0.1623. 在两个双核铁(III)配合物中，中心的三价铁和配体TPA或TBA上的四个氮原子和两个氧原子通过不同的桥形成一个畸变的八面体构型。     

Synthesis of alpha-fluorosulfonamides by electrophilic fluorination

Alpha-fluorosulfonamides were prepared by electrophilic fluorination of tertiary sulfonamides using N-fluorobenzenesulfonimide as fluorinating agent and utilizing the dimethoxybenzyl group (DMB) as a new sulfonamide protecting group. Removal of the DMB group with TFA/CH(2)Cl(2) gave primary and secondary alpha-fluorosulfonamides.     

Adenanthusone,a New Ursane Type Nortriterpenoid from Isodon adenanthus

A new ursane‐type nortriterpenoid, adenanthusone (=(11α,12α)‐4‐demethyl‐11,12‐epoxy‐3,13‐dihydroxy‐2‐oxoursa‐3,20(30)‐diene‐28‐oic acid γ‐lactone; 1 ) was isolated from Isodon adenanthus. Its structure was determined by NMR spectra and X‐ray crystallographic diffraction analysis. The biogenetic implication of the nortriterpene is discussed.     

Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

Lattice disorder in silicon induced by 2.0 MeV Cu+ irradiation

The effect of 2.0 MeV Cu⁺ irradiation on Si(100) crystal has been studied by the Rutherford backscattering/channeling technique. Analysis of the lattice disorder distribution has been performed under 100 direction of tilting off from the target normal: 7°, 30°, and 45° as well as different doses. The lattice disorder distributions in Si(100) have been compared with TRIM'89 simulation. The results show that the lattice disorder distributions in Si(100) under different irradiation angles seem to be in good agreement with TRIM'89 simulation. When the dose increases up to 8.7×10¹⁴ ions/cm², the defect concentration increases leading to the formation of an amorphous layer.     

溶液还原法制备球形超细镍粉

超细镍粉由于表面活性高、导电性和导热性好而被广泛应用于化学催化剂、烧结活化剂、导电浆料门等方面．目前，制备超细镍粉的方法主要有问：真空蒸馏冷凝法、机械粉碎法、电解法、羰基镍热分解法、浆化氢还原法和溶液还原法等．在这些方法中，溶液还原法的工艺简单，所得粉末纯度高，颗粒尺寸小且分布均匀[3]．法国的Figlarz等[4]用弱有机还原剂乙二醇还原粒径小干0．1μm的Ni（OH）2。超细粉末，引入AgNO3。作为成核剂后，制得了粒径＜1μm的超细镍粉，但这种方法需长时间高温回流反应，对原料要求苛刻，且采用有机分散介质成本较高，…     

孔性氧化铝模板与一维纳米新材料的制备

纳米材料尤其是以碳纳米管有序阵列为代表的一维纳米阵列材料的重要价值,促进了人们对模板合成方法的研究。本文简要回顾和总结了近年来有关孔性氧化铝模板的制备及其应用的研究进展,结合我们实验室的部分相关研究工作,揭示了孔性氧化铝模板在合成与组装一维纳米新材料方面的重要作用,以进一步活跃和促进该重要领域的研究和发展。     

不同垃圾焚烧炉排放的PM10 中多环芳烃的研究

对大气可吸入颗粒物采样器进行改装，建立了垃圾焚烧炉烟气中PM10采样系统，并采集了三家垃圾发电厂焚烧炉排放烟气中的可吸入颗粒物。利用GC-MS对可吸入颗粒物中的16种多环芳烃进行定量研究，获得了多环芳烃的质量分数和浓度，并对不同环数的芳烃进行了比较，分析了不同样品中的多环芳烃的毒性参数。结果表明，颗粒物中的多环芳烃主要集中在4环、5环和6环，3环和2环所占比例较少；与燃煤电厂相比，垃圾焚烧发电厂排放的烟气中多环芳烃的浓度和毒性参数更高。