Electrochemical assay of the relationship between the inhibition of phosphatidylinositol 3-kinase pathway and estrogen receptor expression in breast cancer

Breast cancer has become one of the most threatening diseases to women throughout the world. Emerging evidence implies that estrogen receptor (ER) and phosphatidylinositol 3-kinase (PI3K) pathways play central roles in both breast cancer progression and response to therapy. In this work, we have probed into ER expression related to the PI3K pathway at the protein level with an electrochemical technique based on the detection of ER proteins in nuclear extracts with an Exonuclease III protection-based strategy. Experimental results show that an increased number of ER proteins can be detected upon PI3K inhibition, demonstrating the reversal effect of the PI3K inhibitor on ER expression. Moreover, treatment with different concentrations of the PI3K inhibitor NVP-BEZ235 can result in a dose-dependent alteration of ER protein levels, implying an intimate link between ER and PI3K pathways. This work may be a great help to understand the mysteries underlying PI3K-related endocrine resistance and to evaluate the effect of therapeutic interventions in the future.     

氧化铝载体对Pt-Sn-K/γ-Al2O3催化剂上异丁烷脱氢性能的影响

采用盐酸回流法和氨水沉淀法合成了氧化铝载体,并通过络合真空浸渍法制备了不同来源氧化铝负载的Pt-Sn-K/γ-Al₂O₃催化剂。利用N₂物理吸附、CO脉冲吸附、H₂程序升温还原、NH₃程序升温脱附、热重等手段对Pt-Sn-K/γ-Al₂O₃催化剂进行了表征,以异丁烷脱氢为探针反应研究了氧化铝载体对该催化剂脱氢性能的影响。结果表明,与由盐酸回流法合成的载体制备的催化剂相比,采用氨水沉淀法合成的氧化铝载体制备的Pt-Sn-K/γ-Al₂O₃催化剂表面具有较小的Pt颗粒和较弱的酸性分布,其脱氢活性及异丁烯选择性更优。14 d的连续运行数据显示,由氨水沉淀合成的载体制备的催化剂,其抗积炭能力更强,反应后催化剂的积炭石墨化程度更低,因而具有更好的稳定性;在该催化剂上,异丁烷初始转化率为56.67%,14 d后仍能达到34.71%,异丁烯初始选择性为80%,7 d后维持在94%左右。     

基于核酸分子杂交的免疫芯片抗体固定新方法

基于核酸分子杂交原理构建了一种新型抗体固定方法.先将抗体与寡核苷酸单链交联,再将两者的复合物与固相载体表面上的互补寡核苷酸链结合,从而将抗体固定到载体的表面.在磁珠表面对该固定方法进行实验,证明了方法的可行性.以本方法构建了针对转基因Bt Cry1Ac蛋白的免疫芯片,用Cy3标记二抗对其探针固定效果进行分析,并且在芯片上对Bt Cry1 Ac蛋白进行梯度浓度检测试验.结果表明,以本方法构建的抗体芯片,探针分布具有良好的特异性;探针层分布均匀,非特异吸附小;检测灵敏度达到0.01 ～ 0.05 μg/L;此外,通过杂交核酸双链的解离成功实现了芯片的再生,有助于解决传统抗体固定方法中芯片不可再生的问题.     

Simultaneous extraction and determination of fluoroquinolones,tetracyclines and sulfonamides antibiotics in soils using optimised solid phase extraction chromatography-tandem mass spectrometry

An analytical method was developed for the simultaneous extraction and determination of 18 fluoroquinolones (FQs), tetracyclines (TCs) and sulfonamides (SAs) antibiotics from soils using solid phase extraction and liquid chromatography-tandem mass spectrometry. The soils were extracted by different solvents with the help of mechanical shaking and ultrasonic treatment at 59?kHz, followed by a strong anion exchange (SAX) cartridge to clean up soil samples and a hydrophilic lipophilic balance (HLB) cartridge as enrichment. The method was evaluated by testing the following variables: extraction solvents, the type of SPE cartridges, solvent volumes, initial spiking levels and soil types (silty clay loam and clay loam soils). The soil extraction method was validated using these two types of soils, representing two typical agricultural soils in northern China. For 2?g soil, the extraction steps with the mixture of potassium phosphate buffer and acetonitrile (ACN) (1/1, v/v, pH 3.2) provided satisfactory recoveries. In the clay loam soil, the recoveries of all the compounds were from 56% to 89% at the spiking level of 50?µg?kg^?1 soil, and from 69% to 97% at the spiking level of 200?µg?kg^?1 soil, respectively. Recoveries in silty clay loam soil were similar to that in clay loam. The method was successfully employed using soil samples collected from a farmland and afforestion area irrigated with sewage in northern China. The result indicates that trace antibiotics in sewage may accumulate in soil irrigated by river water containing sewage.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Finished-vehicle transporter routing problem solved by loading pattern discovery

This work addresses a new transportation problem in outbound logistics in the automobile industry: the finished-vehicle transporter routing problem (FVTRP). The FVTRP is a practical routing problem with loading constraints, and it assumes that dealers have deterministic demands for finished vehicles that have three-dimensional irregular shapes. The problem solution will identify optimal routes while satisfying demands. In terms of complex packing, finished vehicles are not directly loaded into the spaces of transporters; instead, loading patterns matching finished vehicles with transporters are identified first by mining successful loading records through virtual and manual loading test procedures, such that the packing problem is practically solved with the help of a procedure to discover loading patterns. This work proposes a mixed-integer linear programming (MILP) model for the FVTRP considering loading patterns. As a special class of routing models, the FVTRP is typically difficult to solve within a manageable computing time. Thus, an evolutionary algorithm is designed to solve the FVTRP. Comparisons of the proposed algorithm and a commercial MILP solver demonstrate that the proposed algorithm is more effective in solving medium- and large-scale problems. The proposed scheme for addressing the FVTRP is illustrated with an example and tested with benchmark instances that are derived from well-studied vehicle routing datasets.     

Pd-catalyzed assembly of phenanthridines from aryl ketone O-acetyloximes and arynes through C–H bond activation

Pd-catalyzed annulation of aryne and aryl ketone O-acetyloxime via C–H bond activation was realized. Through the C–H bond activation/insertion/cyclization/elimination reaction sequence, phenanthridines are successfully constructed, providing an attractive strategy to approach substituted heterocycle without preactivation of starting materials.     

Thermoresponsive AuNPs Stabilized by Pillararene‐Containing Polymers

Pillararene‐containing thermoresponsive polymers are synthesized via reversible addition–fragmentation chain transfer polymerization using pillararene derivatives as the effective chain transfer agents for the first time. These polymers can self‐assemble into micelles and form vesicles after guest molecules are added. Furthermore, such functional polymers can be further applied to prepare hybrid gold nanoparticles, which integrate the thermoresponsivity of polymers and molecular recognition of pillararenes.

     

Cu Doping-Induced Transformation from [Ag62S12(SBut)32]2+ to [Ag62−xCuxS12(SBut)32]4+ Nanocluster

The change in the valence state of nanocluster can induce remarkable changes in the properties and structure. However, achieving the valence state changes in nanoclusters is still a challenge. In this work, we use Cu²⁺ as dopant to “oxidize” [Ag₆₂S₁₂(SBu^t)₃₂]²⁺ (4 free electrons) to obtain the new nanocluster: [Ag_62−xCu_xS₁₂(SBu^t)₃₂]⁴⁺ with 2 free electrons. As revealed by its structure, the [Ag_62−xCu_xS₁₂(SBu^t)₃₂]⁴⁺ (x=10∼21) has a similar structure to that of [Ag₆₂S₁₂(SBu^t)₃₂]²⁺ precursor and all the Cu atoms occupy the surface site of nanocluster. It′s worth noting that with the Cu atoms doping, the [Ag_62−xCu_xS₁₂(SBu^t)₃₂]⁴⁺ nanocluster is more stable than [Ag₆₂S₁₂(SBu^t)₃₂]²⁺ at higher temperature and in electrochemical cycle. This result has laid a foundation for the subsequent application and exploration. Overall, this work reveals crystals structure of a new Ag−Cu nanocluster and offers a new insight into the electron reduction/oxidation of nanocluster.