Synthesis of Iso-condensed Heteroaromatic Pyrroles and Their Application in the Preparation of Conducting Polymers

Iso-condensed heteroaromatic pyrroles 1 are 10 -electron aromatic compounds. They are of interest from both theoretical and synthetic points of view. They are the cyclic analogues of heteroaromatic ortho-quinodimethanes 2, and can react with dienophiles in a Diels-Alder reaction to give the synthetically useful cycloadducts 3. Many of them are also of potential pharmaceutical importance because they are isosteric with indoles. Iso-condensed heteroaromatic pyrroles 1 can be used also as the monomers for the synthesis of new conducting polymers 5 with special properties and characteristics. However, the methods for the efficient preparation of the iso-condensed heteroaromatic pyrroles are quite limited. Iso-condensed heteroaromatic pyrroles are generally unstable in acidic conditions and are easily oxidized by air. In our laboratories, we developed three methods for the preparation of this labile heterocyclic ring system under acidic, neutral, and basic conditions.1 Synthesis of the conjugated systems such as 6 for OLED applications will also be discussed.     

胃肠模拟系统对明矾炮制药材中铝的形态转变影响

根据人体胃肠环境变化特点,调节4个明矾炮制药材的水煎液的酸度,于37℃恒温水浴中保持1h之后,用0.45μm微孔滤膜、732氢型阳离子交换树脂分离水煎液中各种铝形态.湿法消解-石墨炉原子吸收光谱法(GFAAS)测定总铝量；GFAAS直接测定水煎液中各形态铝含量.得到了各样品中铝形态含量及分布情况,并且与未调节酸度的样品进行比较,讨论铝在胃肠的模拟系统影响下的形态转变原因.所得结果对明矾炮制药材中铝的安全性评价有参考价值.     

Kinetic and thermodynamic modeling of Portland cement hydration at low temperatures

Portland cement have to hydrate in cold climates in some particular conditions. Therefore, a better understanding of cement hydration under low temperatures would benefit the cement-based composites application. In this study, Portland cement was, therefore, kinetically and thermodynamically simulated based on a simple kinetics model and minimization of Gibbs free energy. The results of an evaluation indicate that Portland cement hydration impact factors include the water–cement ratio (w/c), temperature, and specific surface area, with the latter being an especially remarkable factor. Therefore, increasing the specific surface area to an appropriate level may be a solution to speed the delayed hydration due to low temperatures. Meanwhile, the w/c ratio is believed to be controlled under cold climates with consideration of durability. The thermodynamic calculation results suggest that low-temperature influences can be divided into three levels: irrevocable effects (<0 °C), recoverable effects (0–10 °C), and insignificant effects (10–20 °C). Portland cement was additionally measured via X-ray diffraction, thermal gravity analysis, and low-temperature nitrogen adsorption test in a laboratory and comparisons were drawn that validate the simulation result.     

Synthesis of polymer with defined fluorescent end groups via reversible addition fragmentation transfer polymerization for characterizing the conformations of polymer chains in solutions

A new type of chain transfer agent used in reversible addition fragmentation chain transfer (RAFT) polymerization named 9‐anthracenylmethyl (4‐cyano‐4‐(N‐carbazylcarbodithioate) pentanoate) (ACCP) was synthesized with a total yield over 75% by the incorporation of both fluorescent donor and acceptor chromophores. Polymerization of heterotelechelic α,ω end‐labeled dye‐functionalized polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(n‐butyl methacrylate) (PBMA) with adjustable molecular weights and narrow polydispersity could be conducted by a one‐pot procedure through RAFT polymerization with this bischromophore chain transfer agent. The polymerizations demonstrated “living” controlled characteristics. By taking advantage of the characteristic fluorescence resonance energy transfer (FRET) response between the polymer chain terminals, the variation of chain dimensions in solution from the dilute region to the semidilute region can be monitored by changes in the ratio of the fluorescence intensities of the carbazolyl group to the anthryl group, which lends itself to potential applications in characterizing chain dimensions in solutions for thermodynamic or dynamic studies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2413–2420     

XANES/EPR Evidence of the Oxidation of Nickel(II) Quinolinylpropioamide and Its Application in Csp3−H Functionalization

An in situ generated oxidation species of nickel quinolinylpropioamide intermediate was produced. Characterization by X-ray absorption near edge structure (XANES) and EPR provides complementary insights into this oxidized nickel species. With aliphatic amides and isocyanides as substrates, a nickel-catalyzed facile synthesis of structurally diverse five-membered lactams could be achieved.     

Pharmacokinetics and metabolism study of veratramine in mice after oral administration using LC‐MS/MS

A simple and sensitive high‐performance liquid chromatography coupled with hybrid triple quadrupole–linear ion trap mass spectrometry (Q‐trap‐MS) method was developed and validated for the determination of veratramine, the major bioactive and neurotoxic component in Veratrum nigrum L. Veratramine and the internal standard (IS) were separated with a Waters Symmetry C₁₈ column and eluted with a gradient mobile phase system containing acetonitrile and 0.1% aqueous formic acid. The analysis was performed by using positive electrospray ionization mode with multiple reaction monitoring (MRM). Transition ions of m/z 410.2 → 295.2 for veratramine and m/z 426.1 → 113.8 for the IS were monitored. The method was validated with a good linearity in the range of 1–1000 ng/mL and lower limit of quantification of 1 ng/mL. The precision (CV) of intra‐ and inter‐day ranged from 3.92 to 7.29%, while the accuracy (bias) intra‐ and inter‐day were between ?4.78 and 1.65%. The recovery, stability and matrix effect were within the acceptable ranges. Five metabolites of veratramine, including four hydroxylated and one sulfated metabolites, were tentatively identified using predictive MRM–information dependent acquisition–enhanced product ion mode (predictive MRM‐IDA‐EPI). The developed method was successfully applied to the pharmacokinetic and metabolic study of veratramine in mice after oral administration of veratramine. Copyright © 2016 John Wiley & Sons, Ltd.     

The catalytic performance study of polymerized ionic liquid synthesized in different conditions on alkylation of o‐Xylene with styrene

In this work, a series of novel acidic polymerized ionic liquids were used as heterogeneous catalyst for alkylation of o‐Xylene with styrene. And the effect of the amount of initiator and the type of acid used for ion exchange on catalyst structure and the catalytic performance of catalysts for alkylation were studied thoroughly. The experiment results show: when the percentage of the amount of initiator in the total material is 3%, the polymerized ionic liquid catalyst MPM‐SO₃H‐[C₃V][SO₃CF₃] has the most uniform with a specific surface area of 97.30 m²/g and a pore volume of 0.35 cm³/g. Benefiting from the unique structure features, MPM‐SO₃H‐[C₃V][SO₃CF₃] manifested an excellent catalytic performance for alkylation of o‐Xylene with styrene, along with the conversion of styrene was 96.8% and the yield of 1‐Phenyl‐1‐ortho‐xylene ethane was 94.7%. Therefore, this work provides a novel reference to the synthesis of polymerized ionic liquids and clearly explains the advantage of novel acidic polymerized ionic liquids on alkylation.     

Reversible M−M Bonding by Alkaline Earth Metals (Mg,Ca, Sr,Ba) in Graphite Intercalation Compounds

The alkaline earth metals (M=Mg, Ca, Sr, and Ba) exhibit a +2 oxidation state in nearly all known stable compounds, but M^I dimeric complexes with M−M bonding, [M₂(en)₂]²⁺, (en=ethylenediamine) of all these metals can be stabilized within the galleries of donor-type graphite intercalation compounds (GICs). These metals can also form GICs with more conventional metal (II) ion complexes, [M(en)₂]²⁺. Here, the facile interconversion between dimeric-M^I and monomeric-M^II intercalates upon the addition/removal of en are reported. Thermogravimetry, powder X-ray diffraction, and pair distribution function analysis of total scattering data support the presence of either [M₂(en)₂]²⁺ or [M(en)₂]²⁺ guests. This phase conversion requires coupling graphene and metal redox centers, with associated reversible M−M bond formation within graphene galleries. This chemistry allows the facile isolation of unusual oxidation states, reveals M⁰→M²⁺ reaction pathways, and present new opportunities in the design of hybrid conversion/intercalation materials for applications such as charge storage.