Simultaneous determination of diloxanide furoate and metronidazole in presence of diloxanide furoate degradation products

Three methods are presented for the simultaneous determination of diloxanide furoate (DLX) and metronidazole (MTR), used for their antiprotozoal and antiamoebic effect, in the presence of DLX alkaline degradates and in pharmaceutical formulations, without previous separation. The first method is chemometric-assisted spectrophotometry, in which principal component regression and partial least squares were applied. These two approaches were successfully applied to quantify each drug in the mixture using the information included in, the absorption spectra in the range of 225-320 nm. The second method is TLC-densitometry, in which the binary mixture and degradates were separated on silica gel plates using a chloroform-acetone-glacial acetic acid (9.5 + 0.5 + 0.07, v/v/v) mobile phase and the bands were scanned at 254 nm. The last method is HPLC, in which DLX, MTR, and degradates were separated using the mobile phase acetonitrile-0.05 M dibasic potassium phosphate (25 + 75, v/v), adjusted to pH 4 with orthophosphoric acid, at a flow rate of 1 mL/min, on a C18 analytical column. Detection was at 254 nm. The proposed methods were successfully applied for the analysis of DLX and MTR in pharmaceutical formulations, and the results were statistically compared with a reported spectrophotometric method.     

Development and validation of a reversed-phase column liquid chromatographic method for the determination of five cephalosporins in pharmaceutical preparations

A new, simple, rapid, and precise RP-HPLC method has been developed and validated for the determination of five cephalosporins, namely, cefalexin, cefoperazone, ceftriaxone, ceftazidime, and cefepime. The method has been applied successfully for simultaneous determination of cefalexin in a binary mixture with sodium benzoate in a suspension, and cefoperazone in a binary mixture with sulbactam in vials. Chromatographic separation was achieved on a Waters microBondapak C18 column (250 x 4.6 mm id, 10 pm particle size) using the mobile phase monobasic potassium phosphate (50 mM, pH 4.6)-acetonitrile (80 + 20, v/v) with UV detection. A flow rate of 1 mL/min was applied. Linearity, accuracy, and precision were found to be acceptable over the concentration range of 30-300, 3-30, and 15-120 microg/mL for the studied cephalosporins, sodium benzoate, and sulbactam, respectively. The optimized method proved to be specific, robust, and accurate for QC of the cited drugs in their pharmaceutical preparations.     

Sorption characteristics of caffeine onto untreated polyurethane foam: application to its determination in human plasma

In the present paper, the sorption properties of caffeine (CAF) onto polyether type polyurethane foam (PUF) as solid phase sorbent were investigated with UV determination at 274.3 nm. Batch and column methods were used to optimize chemical, flow, kinetic and isothermal conditions for preconcentration of CAF. Results indicated quantitative sorption of CAF at pH 8 and 30 min shaking time. The maximum sorption capacity was found to be 4.1 mg g(-1). Column preconcentration was recommended at a flow rate of 1.5 mL min(-1) and desorption with 4 mL from 0.15 mol L(-1) hydrochloric acid. The procedure provided a linear analytical range of 0.05-30 mg L(-1). The detection and quantification limits are 0.016 and 0.047 mg L(-1), respectively. The procedure was applied to determination of CAF in spiked human plasma. The obtained recoveries were 98-101% and RSD values were from 0.05 to 9.5%.     

Stability-Indicating Spectrofluorimetric Method for Determination of Itopride Hydrochloride in Raw Material and Pharmaceutical Formulations

A simple, sensitive and rapid spectrofluorimetric method for determination of itopride hydrochloride in raw material and tablets has been developed. The proposed method is based on the measurement of the native fluorescence of the drug in water at 363 nm after excitation at 255 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.1–2 μg/mL (2.5?×?10^?7–5.06?×?10^?6 mole/L), with good correlation (r?=?0.9999), limit of detection of 0.015 μg/mL and a lower limit of quantification of 0.045 μg/mL. The described method was successfully applied for the determination of itopride hydrochloride in its commercial tablets with average percentage recovery of 100.11?±?0.32 without interference from common excipients. Additionally, the proposed method can be applied for determination of itopride in combined tablets with rabeprazole or pantoprazole without prior separation. The method was extended to stability study of itopride. The drug was exposed to acidic, alkaline, oxidative and photolytic degradation according to ICH guidelines. Moreover, the method was utilized to investigate the kinetics of the alkaline, acidic and oxidative degradation of the drug. A proposal for the degradation pathways was postulated.     

Global existence and stability of a nonlinear wave equation with variable-exponent nonlinearities

ABSTRACT

In this paper, we consider a nonlinear wave equation with damping and source terms of variable-exponent types. First, we use the stable-set method to prove a global result. Then, by applying an integral inequality due to Komornik, we obtain the stability result.     

Sulfate migration in oligosaccharides induced by negative ion mode ion trap collision‐induced dissociation

Migration of sulfate groups between hydroxyl groups was identified after collision‐induced dissociation (CID) of sulfated oligosaccharides in an ion trap mass spectrometer in negative ion mode. Analysis of various sulfated oligosaccharides showed that this was a common phenomenon and was particularly prominent in sulfated oligosaccharides also containing sialic acid. It was also shown that the level of migration was increased when the sulfate was positioned on the flexible areas of the oligosaccharides not involved in the pyranose ring, such as the extra‐cyclic C‐6 carbon of hexoses or N‐acetylhexosamines, or on reduced oligosaccharide. This suggested that migration is dependent on the spatial availability of the sulfate in the ion trap during collision. It is proposed that the migration is initiated when the negatively charged ‐SO₃^– residue attached to the oligosaccharide precursor becomes protonated by a CID‐induced proton transfer. This is supported by the CID fragmentation of precursor ions depleted of acidic protons such as doubly charged [M – 2H]^2– ions or the sodiated [M + Na – 2H]^– ions of oligosaccharides containing one sulfate and one sialic acid in the same molecule. Compared to the CID fragmentation of their monocharged [M – H]^– ions, no migration was observed in CID of proton depleted precursors. Alternative fragmentation parameters to suppress migration of sulfated oligosaccharides also showed that it was not present when sulfated oligosaccharides were fragmented by HCD (High‐Energy C‐trap Dissociation) in an Orbitrap mass spectrometer. Copyright © 2011 John Wiley & Sons, Ltd.     

Graphene quantum dots for enhancement of fluorimetric detection coupled to capillary electrophoresis for detection of ofloxacin

A new CE method with fluorescence detection is reported on the determination of ofloxacin in milk samples using graphene quantum dots (GQDs) for sensitivity enhancement. Injection of GQDs prior the standards/sample is crucial to increase the antibiotic fluorescence response. Clean‐up and preconcentration steps allowed for a good linear correlation in a concentration range between 50 and 1000 ng/mL for the ofloxacin, detection and quantification limits being 10.7 and 35.5 ng/mL, respectively. Optimal CE conditions for the seven‐fluoroquinolone separation method were assessed in terms of buffer type, pH, and voltage. The selective interaction of GQDs with ofloxacin as model analyte was subsequently studied finding a significant sensitivity improvement; therefore, the analytes would be detected at low concentrations by means of a commercial CE device equipped with a multi‐wavelength photoluminescence detector. Due to the different maximum emission wavelengths of the target compounds and the limitations shown by the single‐wavelength photoluminescence detector coupled to the CE system, we demonstrated the usefulness of the GQD‐assisted sensitivity‐enhanced CE method to determine ofloxacin in milk samples. This work opens an interesting possibility of using GQDs in separation techniques combined with photoluminescence detectors for lowering sensitivity levels typically provided by the mere device.     

Synthesis of p-tert-butylcalix[4]arene derivatives with trans-alkyl substituents on opposite methylene bridges

Reaction of the bis(spirodiene) calixarene derivative 9 possessing exocyclic double bonds with tetraethylammonium fluoride or chloride afforded bis(spirodienone) calixarene derivatives substituted by the corresponding halogen atoms (11 and 12). Reaction of 9 with alkyl cuprates yielded in one step p-tert-butylcalix[4]arene derivatives with opposite methylene groups substituted in a trans fashion by identical alkyl substituents (methyl, ethyl, or isopropyl). The isopropyl derivative 16 displayed the largest cone-to-cone inversion barrier of the series.     

Chemical Profile of Launaea nudicaulis Ethanolic Extract and Its Antidiabetic Effect in Streptozotocin-Induced Rats

Launaea nudicaulis is used in folk medicine worldwide to treat several diseases. The present study aimed to assess the antidiabetic activity of L. nudicaulis ethanolic extract and its effect on diabetic complications in streptozotocin-induced hyperglycemic rats. The extract was orally administrated at 250 and 500 mg/kg/day for 5-weeks and compared to glibenclamide as a reference drug at a dose of 5 mg/kg/day. Administration of the extract exhibited a potential hypoglycemic effect manifested by a significant depletion of serum blood glucose concurrent with a significant elevation in serum insulin secretion. After 5-weeks, extract at 250 and 500 mg/kg/day decreased blood glucose levels by about 53.8 and 68.1%, respectively, compared to the initial values (p ≤ 0.05). The extract at the two dosages prevented weight loss of rats from the 2nd week till the end of the experiment, compared to diabetic control rats. The extract further exhibited marked improvement in diabetic complications including liver, kidney and testis performance, oxidative stress, and relative weight of vital organs, with respect to diabetic control. Histopathological examinations confirmed the previous biochemical analysis, where the extract showed a protective effect on the pancreas, liver, kidney, and testis that degenerated in diabetic control rats. To characterize extract composition, UPLC-ESI–qTOF-MS identified 85 chromatographic peaks belonging to flavonoids, phenolics, acyl glycerols, nitrogenous compounds, and fatty acids, with four novel phenolics reported. The potential anti-diabetic effect warrants its inclusion in further studies and or isolation of the main bioactive agent(s).     

Enantiomerically enriched cyclopropene derivatives: versatile building blocks in asymmetric synthesis

Enantiomerically enriched cyclopropene derivatives, the smallest possible unsaturated carbocycles, are of great synthetic interest since they serve as versatile reactive building blocks. Their reactivity results from the relief of the ring strain in the small molecule. They can be transformed into a wide variety of complex chiral structures and a special emphasis will be directed towards the preparation of enantiomerically enriched methylene- and alkylidenecyclopropane derivatives. The ready availability of a wide range of these chiral entities now provides an excellent opportunity to discover new and unique transformations that can further enrich mainstream synthetic methodology.