Melting behavior of highly stretched isotactic polypropylene film

Isotactic polypropylene film was stretched in poly(ethylene glycol) at 140°C and its melting behavior was investigated by using a differential scanning calorimeter (DSC-1B). The shape of the melting curve depends largely on the stretching ratio, v. A sample stretched to moderate extension (1 < v < 3.5–4) has only a single melting peak (163°C) in the thermogram. When the sample is stretched beyond v = 3.5–4, the thermogram becomes more and more complex with increase of v, and some peaks appear when stretched to 10 < v < 13. The lowest peak which is considered to be the melting peak of the intermolecular crystals produced by the unfolding of chain molecules in the lamellae develops gradually with increase of v. In the thermogram for v = 18 the lowest temperature peak is most pronounced, in contrast to the highest temperature peak which decreases markedly in intensity. The phenomenon shows that large amounts of lamellar crystals are converted to intermolecular crystals in this region. On further stretching (v > 20) a very sharp high temperature peak appears, whose half-width is about 1°C. Qualitatively similar results were obtained for the samples stretched in poly(ethylene glycol) at 150°C and in air at 140 and 150°C.     

Studies on the biaxial stretching of polypropylene film. III. Electron microscopic observation of the one-step biaxial stretching of isotactic polypropylene spherulites

Polypropylene films of various isotacticities and crystallinities were stretched biaxially in one step in air at 140–152°C or polyaxially in poly(ethylene glycol) at 130–160°C, and the morphological changes were studied by electron microscopy (replica). In the initial stage of stretching, with v_A = 1.4, the spherulites of one of the films used for the experiment were broken both from the centers and boundaries, and those of another film were broken mainly from the center. This difference in the deformation behavior seems to be characteristic of the film properties and independent of the method of stretching, although the factors involved are still unknown. On further stretching (v_A = 22), well annealed spherulites were broken into many small blocklike fragments with unfolded fibrils running among them, particularly at the low stretching temperature (140°C), and fibrillation proceeded at the expense of the residual fragments. In the case of quenched or slightly crystallized material, the fragments were dendritic and divided into finer and finer fibrils on stretching. At elevated temperature, however, even for well annealed spherulites, the deformation behavior resembles that of the quenched material, and at a high degree of stretching the spherulites take on the fibrillar net structure in every case. In films containing a high amount of atactic fraction, radial, tangential, and boundary cracking occurred more easily, and broad fibrils were observed across the cracks.     

522—Catalytic oxydation of biological components on platinum electrodes modified by adsorbed metals: Anodic oxidation of glucose

The catalytic oxidation of glucose on Pt electrodes modified by adsorbed metals was studied in 1 M HClO₄ by linear sweep voltammetry. The adsorbed metals (denoted as M_ad, such as Bi_ad and Pb_ad) formed on Pt in the potential region more positive than the reversible potential of an M⁼⁺/M^o couple, lead to a marked increase in the anodic c?urrent of glucose by about one order of magnitude. The catalytic activity depends on the surface coverage by the M_ad. The strongly adsorbed species of lactone type, which are responsible for blocking the successive oxidation, are formed on the electrode surface in the anodic processes of glucose on a bare Pt electrode. The formation of such poisonous species is accelerated in the presence of adsorbed hydrogen on Pt. The effects of M_ad were discussed on the basis that M_ad plays its major role on the Pt electrode surface in removal of the adsorbed hydrogen which initiates the formation of the poisonous species.     

The electronic structure and spectrum of tropone

The electronic structure and spectrum of tropone were studied by paying special attention to an assignment of the 300 m band. The band was shown to have a single ^* character overlapped by an n ^* transition from the following experimental and theoretical studies: (i) From the comparison of the observed transition energies and intensities with theoretical values obtained by the Pariser-Parr-Pople calculation in which the values of W _X ^2p (valence state ionization potential of the oxygen atom) and k (bond alternation parameter) taken as guiding parameters were changed widely and their adequateness was carefully examined, (ii) From the correlation among the electronic absorption spectra of tropone, troponeimine, and heptafulvene. (iii) From the finding that the 300 m band increases its intensity with the increasing polarity of the solvent. (iv) From the position and intensity of a band newly observed in the vacuum ultraviolet region.

---

Zusammenfassung An Tropon wurden Elektronenstruktur und Spektrum untersucht, speziell die 300 m-Bande. Diese entsteht aus einem einzigen - ^*-Übergang, überlagert von einer schwachen n-^*-Bande, und nicht aus 2 - ^*-Banden. Als Stütze dienen: 1. eine PPP-Rechnung, bei der das Valenzzustandsionisationspotential von Sauerstoff und der Bindungsalternierungsparameter sorgfältig variiert wurden, 2. die Korrelation der Spektren von Tropon, Troponimin und Heptafulven, 3. der Lösungsmitteleinfluß auf die Bande, 4. eine neuaufgefundene UV-Bande.

---

Résumé La structure électronique et le spectre de la tropolone ont été étudiés en accordant une attention particulière à l'identification de la bande à 300 m. Cette bande a été caractérisée comme résultant d'une transition ^* recouverte par une transition n ^*, à l'aide des arguments théoriques et expérimentaux suivants: 1. à partir de la comparaison des énergies et des intensités de transition observées, avec les valeurs théoriques obtenues par un calcul Pariser-Parr-Pople où les valeurs de W _X ^2p (potentiel d'ionisation de l'état de valence de l'atome d'oxygène) et de k (paramètre d'alternance des liaisons), considérés comme paramètres régulateurs, ont été largement variées et soigneusement analysées. 2. à partir de la corrélation entre les spectres d'absorption électronique de la tropolone, de la tropolonéimine et de l'heptafulène. 3. à partir du fait que la bande à 300 m voit son intensité croitre avec la polarité du solvent. 4. à partir de la position et de l'intensité d'une bande nouvelle observée dans la région de l'ultra-violet lointain.

     

Improvement of culture conditions forl-proline production by a recombinant strain ofSerratia marcescens

Serratia marcescens SP511 was previously reported to be anl-proline-producing strain that harbors a recombinant plasmid carrying the mutant type of the proline operon. This strain produced 65 g/L ofl-proline in a medium containing 22% sucrose and urea after 5 d of incubation under the conventional culture conditions. We searched for more suitable culture conditions for more abundantl-proline production by SP511. To improve the supply of a nitrogen source to cells, ammonium was used instead of urea and fed to a culture under control of the pH of the medium. The concentrations of MgSO₄ and K₂HPO₄ were increased, and in addition, sucrose was continuously added to the culture at a final concentration of 32%. Under these conditions, the cell amount was increased twofold over that under the previous conditions andl-proline production reached a maximum of more than 100 g/L after 4 d of incubation.     

Catalytic effects of metal submonolayers formed by faradaic adsorption on the anodic oxidation of ascorbic acid at a platinum electrode

The catalytic effects of metal ions on the anodic oxidation of ascorbic acid on a Pt electrode in 1 M HClO₄ were studied by linear sweep voltammetry. The anodic peak due to a two-electron oxidation of ascorbic acid shifts to the negative potential side on the addition of Bi³⁺. This indicates the accelerating effect of Bi³⁺ on the oxidation of ascorbic acid. The presence of other metal ions, such as Pb²⁺, Hg²⁺, Tl⁺, Ag⁺ and Sb³⁺, also exerts similar effects. These metal ions were adsorbed on a Pt electrode at underpotentials and the adsorbed metals (denoted as M_ad) still remain on the electrode surface until the electrode potential goes up to and beyond the peak potential of the oxidation of ascorbic acid. On the other hand, metal ions forming no adsorbed layer on Pt, such as Co²⁺, Zn²⁺, Fe³⁺ and Ni²⁺, exhibit no catalytic effect. These facts suggest that the presence of a M_ad on Pt is essential for the promotion of the anodic oxidation of ascorbic acid. However, there is a difference in the catalytic action among the M_ad, for example, Cu_ad, Cd_ad, In_ad, Sn_ad and Mo_ad display no catalytic action.The catalytic activity depends on the degree of surface coverage by the M_ad. The maximal effect of the M_ad is attained in the submonolayer region. The effects of metal ions were discussed on the basis that the M_ad plays its major role in the removal of the adsorbed ascorbic acid occupying active sites on the electrode surface, and provides effective sites for the activation of adjacent water molecules. Furthermore, from the ¹³C NMR spectra for the oxidation products, the adsorbed water on the M_ad appears to function by promoting the subsequent hydration steps, following the electron-transfer step of ascorbic acid.     

OBSERVATION OF THE PICOSECOND TIME-RESOLVED SPECTRUM OF SQUID BATHORHODOPSIN AT ROOM TEMPERATURE

Difference spectra between squid rhodopsin and its bathorhodopsin at room temperature were measured ca. 150 ps and ca. 500 ps after the excitation at 347.2 nm by a double-beam picosecond time-resolved spectrometer. The spectra measured showed a red shift of the isosbestic point between squid rhodopsin and its bathorhodopsin and a lower ΔA_max/ΔA_min value compared with those measured at low temperatures by conventional spectrophotometry.     

Structure and ethanol complexation of cyclic tetrasaccharide in aqueous solution studied by NMR and molecular mechanics

The structure and ethanol complexation of a cyclic tetrasaccharide (CTS) in aqueous solution were investigated by proton NMR spectroscopy and molecular mechanics calculations. Two glucose units, A and B, of CTS are alternatively bonded by alpha-1,3 and alpha-1,6 linkages. The overlapped signals of protons A5, A6S, A6R, B3, B6S and B6R were resolved by spectral simulations to determine their chemical shifts and vicinal coupling constants. All vicinal coupling constants except for the A5-A6 spin system are consistent with the dihedral angles in the X-ray crystal structure. Each of protons A5, A6S, and A6R in the two units of A is equivalent with respect to the chemical shift. The vicinal coupling constants of (3)J(5-6S) and (3)J(5-6R) for unit A are close to the average of two rotamers that are present in crystals. The intensities of cross-peaks in the rotating frame nuclear Overhauser effect spectroscopy (ROESY) spectrum were rather well correlated with the effective distances calculated for the X-ray structure and molecular mechanics structures calculated in vacuo and water, although they are slightly better correlated with molecular mechanics structure in vacuo than with the other structures. From the changes of the chemical shifts of several CTS protons with increasing ethanol concentration, it was suggested that adsorption sites of ethanol on the plate structure of CTS are protons B2 and B4 (site B) in the concave face side and protons A1 and A2 (site A) in the convex back side. The binding constants for sites A and B are 0.0061 and 0.0176 M(-1), respectively. These binding constants are much smaller than a value of 4.1 M(-1) for the ethanol-alpha-cyclodextrin complex.     

Determination of a new cerebral vasodilator 2,6-dimethyl-4-(3-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-[2-(N-benzyl-N-methylamino)]-ethyl ester 5-methyl ester hydrochloride (YC-93) in plasma by electron capture gas chromatography

A highly sensitive method for the quantitative determination of 2,6-dimethy-4-(3-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-[2-(N-benzyl-N-methyl-amino)]-ethyl ester 5-methyl ester hydrochloride (YC-93) in plasma is described. After extraction, YC-93 was oxidized to pyridine analogue with nitrous acid and detected by electron capture gas chromatography. The sensitivity was 2–3 ng/ml, which is suficient to determine plasma concentrations of YC-93 after oral administration of clinical doses to humans.     

Modification of Escherichia coli single-stranded DNA binding protein with gold nanoparticles for electrochemical detection of DNA hybridization

The unique binding event between Escherichia coli single-stranded DNA binding protein (SSB) and single-stranded oligonucleotides conjugated to gold (Au) nanoparticles is utilized for the electrochemical detection of DNA hybridization. SSB was attached onto a self-assembled monolayer (SAM) of single-stranded oligonucleotide modified Au nanoparticle, and the resulting Au-tagged SSB was used as the hybridization label. Changes in the Au oxidation signal was monitored upon binding of Au tagged SSB to probe and hybrid on the electrode surface. The amplified oxidation signal of Au nanoparticles provided a detection limit of 2.17 pM target DNA, which can be applied to genetic diagnosis applications. This work presented here has important implications with regard to combining a biological binding event between a protein and DNA with a solid transducer and metal nanoparticles.