Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

Hydrobromic acid-dimethyl sulfoxide reagent for dealkylation of 5,10-dialkyl-5,10-dihydrophenazines: Synthesis of 10-alkyl-2(10H)-phenazinones

By the reaction of 5,10-dialkyl-substituted 5,10-dihydrophenazine with hydrobromic acid in dimethyl sulfoxide at 90–110°, 10-alkyl-2(10H)-phenazinone was obtained as a major product. Brominated dihydrophenazine was isolated in the case of 1,6-dichloro-5,10-dimethyl-5,10-dihydrophenazine.     

Calculation of the critical point for mixtures using mixture models based on Helmholtz energy equations of state

This paper mainly focuses on refrigerant mixtures with relatively simple critical behavior, and presents a practical and useful method for the critical point calculation for the mixtures using mixture models based on Helmholtz energy equations of state. The expression for critical point criterion suitable for this objective is derived first. Numerical manipulations to obtain a physically correct solution are described in detail. For four binary refrigerant mixtures of difluoromethane (R-32) + pentafluoroethane (R-125), R-125 + 1,1,1,2-tetrafluoroethane (R-134a), R-125 + 1,1,1-trifluoroethane (R-143a), and R-32 + propane (R-290), the critical temperatures and critical molar volumes are calculated applying the presented method. The calculation results are compared with experimental values, and the capabilities of the mixture models for the mixtures in the critical region are discussed.     

Development of a bienzyme reactor sensor system for the determination of ornithine

A bienzyme reactor sensor system with amperometric detection was developed for the determination of ornithine. The system based on the immobilized enzymes (ornithine carbamyl transferase and pyruvate oxidase) consisted of a buffer tank, a peristaltic pump, an enzyme reactor, an oxygen electrode and a recorder. Then, 0.1 M MOPS buffer, containing pyruvic acid (0.5 mM) and carbamyl phosphate (0.5 mM), was continuously transferred into the system at 35 °C. Phosphate ion was formed enzymatically by transformation of ornithine in the presence of carbamyl phosphate. Pyruvate oxidase is activated by the presence of phosphate. Therefore, ornithine was determined from the oxygen consumed upon oxidation of pyruvic acid catalyzed by pyruvate oxidase in the presence of phosphate ion. The limit of detection was 0.05 mM and the response was linear to 3 mM (R²=0.9905). The variation coefficients were 4.9 (n=15) and 3.9% (n=15) for 1.1 and 3.0 mM standard ornithine, respectively. Good comparative results (R²=0.9238) were observed between ornithine contents in prawn muscle determined by the proposed system and by the HPLC. One assay was completed within 4 min. The immobilized enzymes were stable for 2 months at 4 °C and more than 150 samples could be continually determined using this enzyme reactor.     

Enantioselective total synthesis of sacrolide A

An enantioselective total synthesis of sacrolide A, an antimicrobial and cytotoxic fourteen-membered macrolactonic oxylipin isolated from an edible freshwater cyanobacterium, has been accomplished from a known carboxylic acid in 20% overall yield by a concise ten-step sequence. The key transformations include chiral oxazolidinone-based diastereoselective installation of two hydroxy-bearing stereocenters, the Horner–Wadsworth–Emmons olefination to construct the full carbon skeleton, and the Shiina macrolactonization to establish the fourteen-membered macrolide structure.