Multicontext wavelet-based thresholding segmentation of brain tissues in magnetic resonance images

A novel segmentation method based on wavelet transform is presented for gray matter, white matter and cerebrospinal fluid in thin-sliced single-channel brain magnetic resonance (MR) scans. On the basis of the local image model, multicontext wavelet-based thresholding segmentation (MCWT) is proposed to classify 2D MR data into tissues automatically. In MCWT, the wavelet multiscale transform of local image gray histogram is done, and the gray threshold is gradually revealed from large-scale to small-scale coefficients. Image segmentation is independently performed in each local image to calculate the degree of membership of a pixel to each tissue class. Finally, a strategy is adopted to integrate the intersected outcomes from different local images. The result of the experiment indicates that MCWT outperforms other traditional segmentation methods in classifying brain MR images.     

Diversity-oriented asymmetric synthesis of hapalosin: construction of three small C9/C4/C3-modified hapalosin analogue libraries

A flexible approach to the beta-hydroxy gamma-amino acid residue (fragment C) of hapalosin has been developed on the basis of the the regio- and diastereoselective Grignard reaction. The method allows the introduction of different side chains at the C9 of hapalosin. Asymmetric syntheses of hapalosin (1a), 9-homohapalosin (1b), 9-i-butyl-hapalosin (1c), 8-epi-hapalosin (epi-1a), and three small libraries diversified at C9 (3-member, 1L3), C9/ C4 (9-member, 1L9), or C9/C4/C3 (27-member, 1L27) have been produced using this method.     

Controlled fabrication of nanopillar arrays as active substrates for surface-enhanced Raman spectroscopy

Highly ordered gold nanopillar arrays were fabricated using anodized aluminum oxide (AAO) templates. Nanopillars with a dimension of 110 +/- 15 nm in vertical height and 75 +/- 10 nm in base diameter were formed with a density of 150 microm(-2). The ordered nanopillar arrays give reproducible surface-enhanced Raman scattering (SERS) at a detection limit of 10(-8) M using thionine as probing molecules. The enhancement by the Au nanopillar arrays was comparable with or better than that of dispersed gold nanoparticle SERS substrates. This work demonstrates a new technique for producing highly ordered and reproducible SERS substrates potentially applicable for chemical and biological assay.     

An experimental and kinetic modeling study of a four-component surrogate fuel for RP-3 kerosene

Detailed high-fidelity kinetic models of fuels are of great significance by providing guidance for the improvement of the combustion performance in engines and promising the reduction of design cycle of new concept combustors. However, the kinetic modeling works on Chinese RP-3 kerosene, the most widely used civil aviation fuel in China, are meager to date. In this study, a kinetic model, including a surrogate fuel and its combustion kinetic mechanism, were developed to describe the combustion of RP-3. Firstly, a surrogate comprised of components n-dodecane, 2,2,4,6,6-pentamethylheptane (PMH), n-butylcyclohexane and n-butylbenzene (22.82/31.30/19.19/26.69 mol%) was proposed based on the combustion property target matching method. These components are all within the typical molecular size (C10-C14) of jet fuels and thereby can potentially improve the ability of the surrogate in emulating the properties that depend on molecular size. Experiments were then carried out in a heated rapid compression machine and a heated shock tube to evaluate the performance of the surrogate in reproducing the combustion behavior of the target fuel over wide conditions. It is found that the surrogate can reproduce the autoignition characteristics of RP-3 very well. A chemical kinetic mechanism was developed to describe the oxidation of this surrogate. This mechanism was assembled using a published n-butylbenzene sub-mechanism and our previous sub-mechanisms for the other pure components, and was assessed against the present experimental data. The results showed that the simulations agreed well with the experimental data under the investigated conditions, demonstrating that the composition of the surrogate and its mechanism are appropriate to describe the combustion of RP-3. The first-stage ignition negative temperature coefficient behavior and the evolution of key radicals were investigated using the kinetic model.     

A transient process observation method based on the non-homogeneous Poisson process model

The current-mode-counting method is a new approach to observing transient processes,especially in transient nuclear fusion,based on the non-homogeneous Poisson process(NHPP)model.In this paper,a new measurement process model of the pulsed radiation field produced by transient nuclear fusion is built based on the NHPP.A simulated measurement is performed using the model,and the current signal from the detector is obtained by simulation based on Poisson process thinning.The neutron time spectrum is reconstructed and is in good agreement with the theoretical value,with its maximum error of a characteristic parameter less than 2.3%.Verification experiments were carried out on a CPNG-6 device at the China Institute of Atomic Energy,with a detection system with a nanosecond response time.The experimental charge amplitude spectra are in good agreement with those obtained by the traditional counting mode,and the characteristic parameters of the time spectrum are in good agreement with the theoretical values.This shows that the current-mode-counting method is effective for the observation of transient nuclear fusion processes.     

贫铀药型罩及其聚能射流

通过对贫铀药型罩的静破甲实验，研究了不同热处理工艺，不同的材料纯度对聚能射流质量的影响。指出合适的淬火工艺对细化晶粒，消除或缓解择优取向起着重要作用；杂质在退火过程中向晶界偏析，使射流在伸长过程中出现晶界脆性断裂是影响射流质量的重要原因。     

三峡升船机船—水—厢耦合系统的非线性有限元时域计算

根据三峡升船机船厢的受力特点，在船厢的纵剖面上建立了非线性水波方程和船—水—厢的耦合运动方程。对非线性水波方程利用摄动理论进行分解得到一阶方程和二阶方程，然后运用伽辽金法得到耦合的有限元离散方程，结合精细积分法进行时域计算。计算采用平面八节点等参单元，并给出了若干算例。     

评价炸药安全性能的苏珊试验

苏珊试验是测量炸药撞击感度的一种射弹试验。将炸药装入壳体中,用空气炮或火炮以30～300m/s,甚至更高的速度发射,弹丸约经3.7m,与钢靶相撞。本文简介了试验的基本方法,用氦氖激光器、接收转换器、测时仪构成的光电系统测量弹丸的飞行速度;用红宝石序列脉冲激光器、纹影仪以及等待型转镜扫描相机构成的高速摄影系统拍摄弹丸的着靶姿态以及撞靶后挤压变形直至点火爆炸的全过程;用传感器、电荷放大器、瞬态波形存贮器构成的数据采集系统测量炸药爆炸后形成的空气冲击波超压。试验得到弹丸撞靶速度与相对释放能关系的苏珊感度曲线。本文给出了JO-9159、JOB-9003以及TNT/RDX 40/60等几种炸药的试验结果,对其安全性能作出了初步评价。     

Two new ent-kaurane diterpenoids from the aerial parts of Isodon excisoides简

Two new ent-kaurane diterpenoids, ent-7a,14b-dihydroxykaur-16-en-15-one-20-oic acid(1) and 1,7a,12b,14b-tetrahydroxy-1,10-seco-ent-kaur-10,16-dien-15-one(2), together with six known ones(3–8), were isolated from the EtOAc extract of the aerial parts of Isodon excisoides. Their structures were elucidated on the basis of 1D NMR and 2D NMR analyses as well as HR-ESI-MS experiments.     

Determination of spices in food samples by ionic liquid aqueous solution extraction and ion chromatography

In the present work, a novel method to extract three kinds of spices, namely vanillin, ethyl vanillin and ethyl maltol from food products such as biscuit, chocolate and milk powder was developed. 1-Octyl-3-methylimidazolium chloride([Omim]Cl) aqueous solution was selected as the extracting medium. A 0.5 g powder of food product was extracted by 5.0 mL of [Omim]Cl aqueous solution(0.3 mol/L, pH 6.0) under ultrasonication at 50 8C, and then the extract was centrifuged for 10 min at 4000 rpm. The extract was filtered through a syringe filter and injected into ion chromatography system for analysis. The separation of the three spices was carried out on an anion exchange column. The detection wavelength was set at 280 nm. Compared with traditional extraction solvents, [Omim]Cl aqueous solution displayed particular advantages. The applicability of the proposed method to real sample was confirmed. Under the optimal conditions, good reproducibility of extraction performance was obtained, with the relative standard deviation(RSD) values ranging from 1.9% to 6.3%. The recoveries of spiked samples were between 79.8% and 95.8%. The detection limits(LOD, S/N = 3) of vanillin, ethyl vanillin and ethyl maltol were in the range of 20–45 mg/kg. The use of ionic liquid aqueous solution as extraction solvent was operationally easy and environmental-friendly.