Enantioreversal in the sharpless asymmetric epoxidation reaction controlled by the molecular weight of a covalently appended achiral polymer

Polymers such as poly(ethylene glycol) (PEG) have proven use in a variety of applications including organic synthesis. We now disclose our investigations into the recently disputed report that PEG tartrate esters can reverse the enantioselectivity of the Sharpless asymmetric epoxidation reaction. The results presented herein have clarified that the enantioselectivity of this reaction can be reproducibly reversed solely as a function of the molecular weight of the appended PEG. By preparing a range of tartrate ligands with varying PEG chains lengths, the reversal was found to occur within a molecular weight change of only 800. As the PEG chain did not affect the inherent chirality of the ligand, the enantioreversal was proposed to occur as a result of two Ti-ligand complexes which differ in their molecularity of ligand, one monomeric in ligand and the other dimeric. Support for this hypothesis was given through equilibrium measurements which revealed that the predominant species in Ti/PEG tartrate ester mixtures is a distinct 2:1 Ti-ligand complex, as opposed to the 2:2 Ti-ligand complex of traditional Sharpless asymmetric epoxidations. In total, these data represent an unrecognized property of PEG-supported catalysts that could open up new venues in the control of asymmetric reactions by means of achiral appended polymers.     

New pyrimidino-crown ether ligands

Eight new macrocyclic ligands containing the pyrimidine subcyclic unit ( 3-10 , Figure 1) have been prepared. Two of these new crown ethers are chiral. Pyrimidino-crowns 3-8 were prepared by treating the di-tosylate derivative of the appropriate oligoethylene glycol with 4-methoxy-5-raethyl-2,6-pyrimidinedimeth-anol in basic conditions. The yields were in the 30-50% range giving the crowns as viscous oils. Chiral dimethyl-substituted pyrimidino-crown 9 was prepared from 4-methoxy-5-methyl-2,6-pyrimidinedimethyl di-tosylate and chiral dimethyl-substituted tetraethylene glycol. Treatment of dimethyl 4-methoxy-5-methyl-2,6-pyrimidinedicarboxylate with the diamine derivative of chiral dibenzyl-substituted tetraethylene glycol gave the chiral dibenzyl-substituted pyrimidino-crown diamide 10. Starting 4-methoxy-5-methyl-2,6-pyrimidinedi-methanol was prepared by a six step process from acetamidine hydrochloride and diethyl oxalpropionate.     

Gas Hydrate Formation in Reversed Micelles

We describe a technique to modify protein solubility and optimize enzyme activity in reversed micellar solutions. The technique is based on the ability of hydrates of natural gas to form in the micro-aqueous phase. Clathrate hydrates are crystalline inclusions of water and gas, and their formation in bulk water has traditionally been studied with relevance to natural gas recovery. We have found that hydrates can form in the environment of the microaqueous pools of reversed micelles, and that their extent of formation can be well controlled through the thermodynamic variables of temperature and pressure. Additionally, formation of hydrates affects the size and aggregation number of the micelles, and thus influences the solubility and conformation of encapsulated proteins. We demonstrate how the concept can be used in two applications: (i) protein extraction into reversed micelles and subsequent recovery, and (ii) optimization of enzyme activity in reversed micelles.     

Solid state radioluminescent lighting

We have demonstrated novel types of tritium-powered, solid-phase radioluminescent (RL) light sources. These lights include: (1) all-organic formulations comprised of polystyrene and fluorescent organic dyes; (2) polydimethylsiloxane-based systems incorporating inorganic phosphors; and (3) inorganic aerogel-based systems doped with phosphors. Three principal design consideration for these new RL lights are described. These include: (1) incorporation of tritium into the solid matrix; (2) molecular engineering to maximize light-output efficiency; and (3) strategies for increasing longevity. The advanced RL lights, which are of interest due to potential advantages in efficiency, brightness and safety, are being developed for emergency lighting uses and for battery and lighting applications in remote locations.     

Characterization of biopolymers by pyrolysis gas chromatography and multidimensional analysis. Application to synthetic melanins

A method for characterization of the melanin biopolymer has been developed and validated by the use of synthetic melanins derived from tyrosine, dopamine or hydroquinone. The technique involved pyrolysis gas-liquid chromatography with capillary columns. A back-flushing technique is described which improves pyrogram reproducibility such that closely related melanins can be distinguished with the aid of principal components analysis and non-metric multidimensional scaling.     

Functionalized di- and tetrathia-crowns and their use to quantitatively separate and recover gold(III), palladium(II), silver(I) and mercury(II) Ions

Two new dithia-crowns containing a hydroxy group and 1,4,7,10-tetrathia-18-crown-6 containing an allyl-oxymethyl substituent were prepared in good yields. Two of these crowns were covalently attached to silica gel. The silica gel-bound thia-crowns were used to separate gold( III ), palladium( II ), silver( I ) and mercury( II ) ions from an aqueous 0.1 M nitric acid solution which also contained 1.0 M ferric chloride.     

Synthesis and testing of new end-functionalized oligomers for molecular electronics

Several new classes of oligomers have been synthesized with functionalities designed to aid in the understanding of molecular device behavior, specifically when molecules are interfaced between proximal electronic probes. The compounds synthesized are series of azobenzenes, bipyridines and oligo(phenylene vinylene)s that bear acetyl-protected thiols for ultimate attachment to metallic surfaces. Some initial electrochemical and solid-state test results are also reported.     

Synthesis and structural studies of hydrazino-crown ethers and thermodynamic studies of their interaction with transition,and post-transition metal ions and methyl ammonium ion

Hydrazino-crown ethers have been synthesized in only 3 or 4 steps starting from 1,2-diacetylhydrazine. The X-ray crystal structure of protonated hydrazino-19-crown-7 (2) showed that one of the hydrazino nitrogen atoms was directed outside the ring cavity. A solvent methanol molecule is held in the cavity of the host ligand by three hydrogen bonds involving two hydrogen atoms bonded to nitrogens of the ligand and the alcohol hydrogen of the methanol. The logK values for the interaction of2 with CH₃NH ₊ ³ , Ag⁺, Pb²⁺, and Cd²⁺ were much less than those for the interaction of symmetrical triaza-l8-crown-6 (5) with the same cations. Hydrazino-crown2 reduced silver ions to silver metal when a solution of2 and silver ions in DMSO was allowed to stand for several days.     

Development of a systems analysis approach for resolving the structure of biodegrading soil systems

An experimental and mathematical method is developed for the microbial systems analysis of polyaromatic hydrocarbon (PAH)-degrading mixed cultures in PAH-contaminated “town gas” soil systems. Frequency response is the primary experimental and data analysis tool used to probe the structure of these complicated systems. The objective is to provide a fundamental protocol for evaluating the performance of specific mixed microbial cultures on specific soil systems by elucidating the salient system variables and their interactions. Two well-described reactor systems, a constant volume stirred tank reactor (CSTR) and a plug flow differential volume reactor, are used in order to remove performance effects that are related to reactor type as opposed to system structure. These two reactor systems are well-defined systems that can be described mathematically and represent the two extremes of one potentially important system variable, macroscopic mass transfer. The experimental and mathematical structure of the protocol is described, experimental data is presented, and data analysis is demonstrated for the stripping, sorption, and biodegradation of napththalene.     

The Remarkable Structure of Lithium Cyanide/Isocyanide

Electron correlation corrections have a considerable influence on the relative stabilities of lithium isocyanide ( 1 ), lithium cyanide ( 2 ), and the bridged form, 3 . While Hartree-Fock theory finds 1 to be most stable and 3 not to be a minimum, MP2/6-31G* optimization indicates 3 to be the global minimum. At higher levels employing full fourth-order Møller-Plesset theory and a quadruply split valence and polarized basis set (MP4STDQ/6-311+G*), 2 is only about 2 kcal/mol less stable than 1 and 3 , which are indicated to have nearly the same energy. LiNC thus is similar to C(Na)N and C(K)N, both of which are known to prefer T-shaped (bridged) structures in the gas phase. However, to an even greater extent than formerly realized, rotation of the lithium cation around the cyanide anion nucleus should be practically free. ΔH (LiCN) = 32.8 kcal/mol is estimated from the calculated lithium cation affinity of 151.2 kcal/mol. In addition, we find at the MP4SDTQ/6-31+G*//MP2/6-31G* level that the bridged form of NaCN is favored by 2–3 kcal/mol over the corresponding linear forms, which have nearly the same energy.