Arsenic Speciation Analysis in Solutions Treated with Zeolites

Experiments have been carried out to study the behaviour of organoarsenicals treated with zeolites by means of speciation analysis. IC-ICP-MS was applied to identify and quantify arsenite, arsenate and the following organoarsenicals: monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), trimethylarsine oxide (TMAO), tetramethylarsonium bromide (TMA⁺), arsenobetaine (AsB) and arsenocholine (AsC). Zeolites loaded with ferrous ions did not significantly increase the retention of inorganic arsenic species compared to the native zeolites, while there was a ten-fold removal of arsenate relating to arsenite. The formation of As(V) and DMA in the leachates containing clinoptilolites and mordenites was confirmed in the presence of natural and synthetic zeolites. Arsenobetaine and arsenocholine yielded higher levels of arsenate than the methylated species.     

A Gerischer phase element in the impedance diagram of the polymer electrolyte membrane fuel cell anode

We study the isothermal hydrogen adsorption and reaction at the E-TEK electrode of a polymer electrolyte fuel cell with a Nafion 117 membrane by impedance spectroscopy at 30 degrees C. We find that the impedance diagram must include a Gerischer phase element. Constant phase elements are not sufficient to describe the experimental data. This means that an adsorption reaction takes place in combination with surface diffusion of hydrogen in the carbon layer located before the platinum surface, separate from the charge transfer step at the platinum particle surface. We are not able to distinguish between molecular or atomic hydrogen diffusion on carbon. We predict and find that the relaxation time of the adsorption step is independent of the applied potential. Water may also enter rate-limiting steps in the electrode reaction, but its role needs further clarification.     

Determination of (R)- and (S)-phenprocoumon in human plasma by enantioselective liquid chromatography/electrospray ionisation tandem mass spectrometry

Phenprocoumon is a commonly used oral anticoagulant of the coumarin type, and has found extensive clinical use in the treatment of thrombophlebitis, pulmonary embolism and atrial fibrillation. In the course of a clinical study to investigate the influence of genetic polymorphisms of the CYP2C9 enzyme on phenprocoumon metabolism, we developed a new enantioselective liquid chromatography/electrospray ionisation tandem mass spectrometry (LC/MS/MS) method to quantify (R)- and (S)-phenprocoumon in human plasma. HPLC separation of the enantiomers was achieved on a Chira-Grom-2 column under isocratic conditions using a water/acetonitrile/formic acid eluent. For detection and quantification a triple-quadrupole MS system was used in the selected reaction monitoring (SRM) mode. As an internal standard the structurally homologous compound warfarin was chosen. The detector response was linear with a correlation coefficient of 0.988-0.999 for (R)-phenprocoumon and 0.989-0.999 for (S)-phenprocoumon in the investigated concentration range between 62.5 and 1000 ng/mL (per enantiomer). The limit of detection (LOD) was 12.5 ng/mL.     

Synthesis of pyrimidines from 3-trifluoromethylsulfonyl-oxypropeniminium triflates and nitriles; molecular and crystal structure of the 1:1 and 1:2 Adducts of a 4-(2-diethylaminovinyl)pyrimidine with triflic acid

The 3-trifluoromethylsulfonyloxy-1-hexeniminium triflate 1 reacts with two equivalents of an aliphatic nitrile or of benzonitrile to give the 4-(2-diethylaminovinyl)pyrimidinediium bis(triflates) 4 , which can be deprotonated to give the monoprotonated or neutral pyrimidines 5 and 6 , respectively. When the related 1-phenyl-substituted iminium salt 7 is heated in acetonitrile at 140°, 1,5-cyclization of the cation leading to indane derivative 8 competes with formation of the pyrimidinium salt 9 . X-ray crystal structure determination reveals significant differences in the bond lengths of mono-and diprotonated 4-(2-diethylaminovinyl)pyrimidines 5a and 4a .     

Deprotonierte Dithiocarbaminsäureester als Thiolat-S-Donor-Liganden. Strukturen von Ph(H)NC(S)SMe,Co(PhNC(S)SMe)3 und Cu6(PhNC(S)SMe)6

Deprotonated Dithiocarbamic Acid Esters as Thiolate S-Donor Ligands. Structures of Ph(H)NC(S)SMe, Co(PhNC(S)SMe)₃, and Cu₆(PhNC(S)SMe)₆ The reaction of N-phenyl-S-methyldithiocarbamate, PhN(H)C(?S)SMe, ( 1 ) with cobalt(II) and copper(II) salts yields the monomeric compound Co^III(PhNC(S)SMe)₃ ( 2 ) and the hexameric compound Cu₆^I(PhNC(S)SMe)₆ ( 3 ). These complexes contain the negatively charged imino-thiolate ligand PhN?C(? S)SMe, which has been formed by deprotonation of 1 . The crystal structures of 1 – 3 have been determined. 1 forms centrosymmetrical dimers through N? H …? S bridge bonds, the conformation in the solid state and in solution is Z,E′. Co^III shows in 2 a trigonal-antiprismatic coordination, with the ligands acting as N,S-chelates. 3 contains an octahedral Cu₆-core with Cu …? Cu-distances ranging from 276.3(5) to 305.7(4) pm. Each copper center is trigonally coordinated to one nitrogen and two sulfur atoms of three different ligands. Crystal data: 1 , triclinic, space group P1 , a = 590.5(6), b = 869.0(1), c = 968.5(9) pm, α = 67.29(8), β = 78.44(8), γ = 81.64(9)°, Z = 2, 1 775 reflections, R(R_w) = 0.0317(0.032). 2 , orthorhombic, space group Pbca, a = 978.0(2), b = 1 842.9(4), c = 3 059.7(6) pm, Z = 8, 1 129 reflections, R(R_w) = 0.0997(0.0886). 3 , monoclinic, space group P2₁/c, a = 1 363.1(3), b = 1 342.8(3), c = 1 671.9(3) pm, β = 103.48°, Z = 2, 1 374 reflections, R(R_w) = 0.0708(0.0617).     

Absorption and emission spectroscopic characterisation of combined wildtype LOV1-LOV2 domain of phot from Chlamydomonas reinhardtii

An absorption and emission spectroscopic characterisation of the combined wild-type LOV1-LOV2 domain string (abbreviated LOV1/2) of phot from the green alga Chlamydomonas reinhardtii is carried out at pH 8. A LOV1/2-MBP fusion protein (MBP=maltose binding protein) and LOV1/2 with a His-tag at the C-terminus (LOV1/2-His) expressed in an Escherichia coli strain are investigated. Blue-light photo-excitation generates a non-fluorescent intermediate photoproduct (flavin-C(4a)-cysteinyl adduct with absorption peak at 390 nm). The photo-cycle dynamics is studied by dark-state absorption and fluorescence measurement, by following the temporal absorption and emission changes under blue and violet light exposure, and by measuring the temporal absorption and fluorescence recovery after light exposure. The fluorescence quantum yield, phi(F), of the dark adapted samples is phi(F)(LOV1/2-His) approximately 0.15 and phi(F)(LOV1/2-MBP) approximately 0.17. A bi-exponential absorption recovery after light exposure with a fast (in the several 10-s range) and a slow component (in the near 10-min range) are resolved. The quantum yield of photo-adduct formation, phi(Ad), is extracted from excitation intensity dependent absorption measurements. It decreases somewhat with rising excitation intensity. The behaviour of the combined wildtype LOV1-LOV2 double domains is compared with the behaviour of the separate LOV1 and LOV2 domains.     

An improved method for the synthesis of cellulose membrane-bound peptides with free C termini is useful for PDZ domain binding studies

SPOT synthesis permits parallel synthesis and screening of thousands of cellulose membrane-bound peptides to study protein-protein interactions in a proteomic context. Recognition of C-terminal residues is one of the most common binding features of PDZ domains. Unfortunately, most solid support-bound peptide libraries lack a free C terminus due to C-terminal fixation on the solid support. To overcome this restriction, we developed a robust methodology based on our previous strategy for generating peptides with authentic C termini. To validate this improved method, we screened a human peptide library of 6223 C termini with the syntrophin PDZ domain. Furthermore, using the same library, new peptide ligands derived from membrane proteins and receptors were found for the ERBIN PDZ domain. Finally, we identified the protein kinase breakpoint cluster region, which is known as a negative regulator of cell proliferation and oncogenic transformation, as an ERBIN ligand.     

Destabilized carbenium ions: Secondary and tertiary α-carbomethoxybenzyl cations

The secondary α-carbomethoxybenzyl cations a and the tertiary α-carbomethoxybenzyl cations d have been generated by electron impact-induced fragmentation from appropriately α-substituted methyl phenylacetate and 2-phenylpropionates 1–4. The ions a and d are further examples of destabilized carbenium ions with a push–pull substitution at the carbenium ion centre. The characteristic reaction of these ions is a rearrangement by a 1,2-shift of the methoxy group concomitant to the elimination of CO. This rearrangement reaction is associated with a very large and non-statistical kinetic energy release (a : T ₅₀ = 570 meV; d : T ₅₀ = 760 meV), which is attributed to tight transition states along the reaction coordinates corresponding to the three-membered cyclic oxonium ions b and h, respectively. The tertiary ion d can be distinguished from its more stable isomers f and g by the mass-analysed ion kinetic energy and collisional activation spectra. The investigation of specifically deuterated analogues of ions d and g reveals an isomerization of d to g via a species protonated at the phenyl group but no equilibration between d and g. This isomerization exhibits a large isotope effect for the hydrogen transfer, indicating similar energy barriers for the isomerization and for the CO elimination of d.     

CARSA,a computer-assisted system for synthesis research in industry

Computer applications in chemical industry are outlined and the CARSA system (computer-assisted research in synthesis and application) is described. This modular system consists of the three main parts: WIFODATA (data base; substance and finding documentation), QSAR (programs for quantitative structure/activity relationships) and RDSS (reaction design by synthon substitution; program package for planning of syntheses). The vital RDSS component is discussed in more detail; the underlying philosophy is explained, and examples are given from practical work. Some future steps towards a real molecular-design system are outlined.     

Preparation of polycrystalline Ti-Al-O films by magnetron sputtering ion plating: constitution, structure and morphology

Ti-Al-O layers were deposited on Si-<100> wafers at 500 °C by means of reactive magnetron sputtering ion plating (R-MSIP). An Al-target was sputtered in rf-mode and a Ti-target in dc-mode simultaneously by an oxygen/argon plasma. The influence of the Al- and Ti-sputter powers on composition, structure, and morphology of the Ti-Al-O layers and the binding states of the components were investigated. The analysis with EPMA, XPS, AES and TEM yielded the following results: Ti-Al-O coatings with different Ti, Al, and O contents in the range of TiO₂ to Al₂O₃ were grown. TEM structure analysis revealed: the pure TiO₂ film consisted of the tetragonal phases rutile and anatase; the two structures were found in the titanium-rich Ti-Al-O film, too, but with significant smaller lattice constants. The aluminium-rich Ti-Al-O film displayed the same cubic structure of γ-Al₂O₃ as determined for the pure Al₂O₃ film, but the lattice constant is significant lower. Evaluation of the TEM pattern of the film with a Ti/Al ratio of 0.8 indicates a hexagonal structure with lattice constants similar to those of κ′-Al₂O₃. All films are nanocrystalline and not textured. Received: 24 June 1996 / Revised: 27 December 1996 / Accepted: 4 January 1997