Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

226Ra in milk of the dairy cattle from the rural region of Pernambuco, Brazil

Summary Studies performed by the Brazilian Nuclear Corporation (NUCLEBRAS), in collaboration with the Geological Survey Company of Brazil (CPRM), identified high levels of natural uranium in the districts of Pedra and Venturosa, in the rural region of the state of Pernambuco (PE) - Brazil, where the maximum value found in rocks was 22,000 mg.     

T-x-y diagram of the Ni-Bi-Se system

Some polythermal sections of the Ni-Bi-Se system have been investigated by DTA, X-ray powder diffraction, microstructural analysis, and microhardness measurements. The liquidus surface has been constructed for this system. The compounds NiBi₂Se₄ and Ni₃Bi₂Se₂ are formed by dystectic reactions and melt at 1088 and 980 K, respectively. The regions of primary and joint phase crystallization have been determined. A commutation of Bi₂Se₃-based thermoelements with a metal nickel bus-bar has been proposed.     

Mechanical mixtures of Me (Ni, Pd) Ce oxides and silica-supported heteropolyacids: Role and optimal concentration of each active species in n-hexane isomerization

Catalytic properties of silica-supported heteropolyacids (HPA) in a mechanical mixture with reduced Me-Ce oxides (Me = Ni, Pd) in n-hexane isomerization are studied. The role of each component of the mixed oxides (Ce and, typically, Ni and Pd) and their optimum content has been illuminated: cerium is not only beneficial for eliminating or preventing coke deposition but is also effective for maintaining the Keggin structure of the highly-organized HPA during the reaction and probably allows a better dispersion of the second metal species. Nickel and palladium, present as Ni⁰ and Pd⁰, reinforce the activation of the alkane, which is difficult to obtain by means of a direct attack by an acid, and, thus, enhance noticeably the activity of the catalyst. The best mechanical mixtures are obtained with 30–70 wt % NiCeO-HPW/SiO₂ and 50–50 wt % Pd_0.1CeO-HPW/SiO₂. These mixtures have the highest efficiency for a Ni/(Ni + W) atomic ratio of 0.66 and a Pd/(Pd + W) ratio of 0.40, respectively. Finally, the conversion of n-hexane is in the order HPW > HSiW > HBW, which seems to be consistent with the order of their acid strength as per the literature, but the isomerization selectivity appears to be slightly higher on HSiW. Published in Russian in Kinetika i Kataliz, 2006, Vol. 47, No. 1, pp. 24–28. The text was submitted by the authors in English.     

Papieruntersuchung

Analytical and Bioanalytical Chemistry -     

Bücherbesprechungen

Ohne Zusammenfassung