火焰原子吸收光谱法测定铅精矿中高含量的银

采用火焰原子吸收光谱法直接测定铅精矿中高含量的银，其程序是将样品于700℃灼烧30min，以盐酸溶解后配制成溶液，用空气-乙炔火焰光度法测定样品中银的含量。该法简便、快速，结果准确。     

Photophysical processes of a copolymer containing naphthalene and carbazole rings

The photophysical processes of copolymer formed by copolymerization of beta-naphthyl-methacrylate (NMA) with vinylcarbazole (VCZ) were studied. The results show that when the solution of copolymer (NMA-VCZ) in THF is located in a low concentration range (about 10(-8) mol/l), the fluorescence emission is in good agreement with that of NMA monomer and the excimer is formed with gradual increase in concentration of copolymer (NMA-VCZ). The fluorescence of copolymer (NMA-VCZ) can be efficiently quenched both by electron donors and acceptors where the quenching effects follow the Stern-Volmer equation. The dimolecular exciplex between copolymer (NMA-VCZ) and N,N-dimethylaniline (DMA) is formed and the triple exciplex is also observed in the same system.     

Novel cross-linked homogeneous polyacrylamide gels with improved separation properties: investigation of the cross-linker functionality

Polyacrylamide (PAAm) gels were synthesized using cross-linkers with their potential functionality (twice the number of double bonds of a cross-linker) varying from six to sixteen. Improved electrophoretic separation and highly desirable porosity and sieving properties were observed for most of the PAAm gels containing novel cross-linkers. An increase in the potential functionality of cross-linkers used in PAAm gels was an important factor, influencing the pore size and pore size distribution of the network.     

Effect of gamma irradiation on ethylene–octene copolymers

Two ethylene–octene copolymers (POE) were irradiated with ⁶⁰Co gamma radiation and influence of irradiation atmosphere, absorbed dose and heat treatment of samples on the crosslinking were studied. Thermal properties and crystalline morphology of non-irradiated and irradiated POE were determined by using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXS), respectively. The Charlesby–Pinner equation was used to describe the relationship between absorbed dose and sol fraction. The gel fraction of irradiated POE was lower and decreased with the increase of octene content when irradiated in oxygen, compared to irradiation in nitrogen atmosphere. The gel fraction increased significantly with the increasing of absorbed dose for the two copolymers. Heat treatment of samples prohibited the crosslinking of irradiated POE. The DSC results indicated that a subtle change of thermal properties of POE was observed before and after gamma irradiation at low dose. No change was found from the WAXS spectra of non-irradiated and irradiated POE. For heat-treating samples, the Charlesby–Pinner equation can not fit perfectly with the relationship between the sol fraction and absorbed dose, but it fits well with the crosslinking reaction of POE pellets.     

Ce(4+) doped TiO<Subscript>2</Subscript> thin films: Characterization and photocatalysis

Undoped and Ce(4+) doped TiO₂ thin films were prepared by sol-gel method. The samples were characterized using scanning electron microscopy, the photocatalytic reactivity was evaluated by degradation of methylene blue in the aqueous solution. 0.5 wt. % Ce(4+) doped TiO₂ thin films calcined at 400°C show the highest photocatalytic activity. The text was submitted by the authors in English.     

A model for Joule heating-induced dispersion in microchip electrophoresis

This paper presents an analytical and parameterized model for analyzing the effects of Joule heating on analyte dispersion in electrophoretic separation microchannels. We first obtain non-uniform temperature distributions in the channel resulting from Joule heating, and then determine variations in electrophoretic velocity, based on the fact that the analyte's electrophoretic mobility depends on the buffer viscosity and hence temperature. The convection-diffusion equation is then formulated and solved in terms of spatial moments of the analyte concentration. The resulting model is validated by both numerical simulations and experimental data, and holds for all mass transfer regimes, including unsteady dispersion processes that commonly occur in microchip electrophoresis. This model, which is given in terms of analytical expressions and fully parameterized with channel dimensions and material properties, applies to dispersion of analyte bands of general initial shape in straight and constant-radius-turn channels. As such, the model can be used to represent analyte dispersion in microchannels of more general shape, such as serpentine- or spiral-shaped channels.     

A practical synthesis of aryl tetrafluoroethyl ethers via the improved reaction of phenols with 1,2-dibromotetrafluoroethane

An efficient and practical synthesis of various aryl tetrafluoroethyl ethers by the reaction of phenols with 1,2-dibromotetrafluoroethane and the subsequent reduction with zinc dust was described. The nucleophilic substitution of 1,2-dibromotetrafluoroethane with phenols initiated by bromophilic attack was improved by using Cs₂CO₃ as a base and DMSO as a solvent.     

AN EVA/UNMODIFIED NANO-MAGNESIUM HYDROXIDE/SILICONE RUBBER NANOCOMPOSITE WITH SYNERGISTIC FLAME RETARDANCY

A novel EVA/unmodified nano-magnesium hydroxide(NMH)/silicone rubber ternary nanocomposite was prepared by using a special compound flame retardant of NMH and silicone rubber(CFR).The flammability of the ternary composite was studied by cone calorimeter test(CCT).Synergistic effect on flame retardancy was found between silicone rubber and NMH.EVA/CFR ternary nanocomposite showed the lowest peak heat release rate(PHRR)and mass loss rate (MLR)among the samples of virgin EVA,EVA composites.The synergistic flame retardancy of silicone rubber and NMH in EVA system is attributed to the enhanced char layers in the condensed phase that prevents the heat and mass transfer in the fire.     

Synthesis and characterization of poly (n-butyl acrylate)-poly (methyl methacrylate) latex interpenetrating polymer networks by radiation-induced seeded emulsion polymerization

A series of latex interpenetrating polymer networks (LIPNs) were prepared via a two-stage emulsion polymerization of methyl methacrylate (MMA) or mixture of MMA and n-butyl acrylate (n-BA) on crosslinked poly(n-butyl acrylate)(PBA) seed latex using ⁶⁰Co γ-ray radiation. The particles of resultant latex were produced with diameters between 150 and 250 nm. FTIR spectra identified the formation of crosslinked copolymers of PMMA or P(MMA-co-BA). Dynamic light scattering (DLS) showed that with increasing n-BA concentration in second-stage monomers, the particle size of LIPN increased. Transmission electron microscope(TEM) photographs showed that the morphology of resultant acrylate interpenetrating polymer network (IPN) latex varied from the distinct core-shell structure to homogenous particle structure with the increase of n-BA concentration, and the morphology was mainly controlled by the miscibility between crosslinked PBA seed and second-stage copolymers and polarity of P(MMA-co-BA)copolymers. In addition, differential scanning calorimeter (DSC) measurements indicated the existence of reinforced miscibility between PBA seed and P(MMA-co-BA)copolymer in prepared LIPNs.     

脱铁伴清蛋白两结合位点不同酪氨酸氢键的特性

The interaction of gallium（Ⅲ） with the ligands containing phenolic group（s）, such as salicylic acid, 8-hydroxyquinoline, N,N＇-bis（2-hydroxybenzyl）ethylenediamine-N,N＇diacetic acid （HBED）, N,N＇-ethylenebis[2-（o- hydroxyphenyl）glycine （EHPG）, and ovotransferrin, was studied, respectively, by means of fluorescence in 0.01 mol/L Hepes at pH 7.4 and room temperature. Fluorescence intensity showed an increase when gallium（Ⅲ） was bound to 8-hydroxyquinoline and HBED. In contrast, it was decreased with the interaction of gallium（Ⅲ） with salicylic acid and EHPG. At pH 7.4, there was N…H-O type intramolecular hydrogen bond in the former, and the latter existed O…H-O type intramolecular hydrogen bond. Fluorescence titration of apoovotransferrin with gallium（Ⅲ） displayed that the fluorescence intensity was decreased at the N-terminal binding site, while enhanced at the C-terminal binding site. It can account for the O…H-O type intramolecular hydrogen bonds for the phenolic groups of Tyr92 and Tyr191 residues at the N-terminal binding site. And there are N…H-O type intramolecular hydrogen bonds for Tyr431 and Tyr524 residues at the C-terminal binding site. In addition, under the same conditions, the conditional binding constant of gallium（Ⅲ） with EHPG or HBED determined by fluorescence method is lg KGa-EHPG=19.18 or lg KGa-HBED= 19.08.