A Highly Efficient Chelating Polymer for the Adsorption of Uranyl and Vanadyl Ions at Low Concentrations

A new polymer containing double amidoxime groups per repeating unit was synthesized to enhance the metal ion uptake capacity. The adsorption properties of this new polymeric adsorbent, amidoximated poly(N,N-dipropionitrile acrylamide), for U(VI), V(V), Cu(II), Co(II) and Ni(II) ions were investigated by batch and flow-through processes at very low concentration levels (ppb). The chelating polymer showed high adsorption capacity for uranyl as well as vanadyl ions. In selectivity studies from a mixture of metal ions in aqueous solutions, the adsorbent showed high selectivity for uranyl and vanadyl ions in the following order: U(VI) > V(V) Co(II) = Cu(II) Ni(II) as determined by calculating the distribution coefficients D, of corresponding ions. The adsorption of uranyl and vanadyl ions from natural seawater by the new adsorbent was also examined in flow through mode.     

Temperature dependence of oxygen reduction activity at Pt-Fe, Pt-Co, and Pt-Ni alloy electrodes

Oxygen reduction reaction (ORR) activity and H(2)O(2) formation at Pt(54)Fe(46), Pt(68)Co(32), and Pt(63)Ni(37) electrodes in 0.1 M HClO(4) solution at 20 to 90 degrees C were investigated by using a channel flow double electrode method. In the temperature range of 20-50 degrees C, the apparent rate constants k(app) for ORR at these electrodes were found to be 2.4-4.0 times larger than that at a pure Pt electrode, whereas their apparent activation energies of 41 kJ mol(-1) at -0.525 V vs E degrees (0.760 V vs RHE at 30 degrees C) were comparable to that at the Pt electrode. H(2)O(2) yield was ca. 1.0% at Pt(54)Fe(46) and ca. 0.16% at Pt(68)Co(32) and Pt(63)Ni(37) between 0.3 and 1.0 V vs RHE. The k(app) values at the alloy electrodes decreased with elevating temperature above 60 degrees C, and settled to almost the same values at the Pt electrode. The H(2)O(2) production was not detected at the alloy electrodes once heated at the high temperature in the solution, probably due to the thickening of the Pt skin-layer by a considerable dissolution of nonprecious metal components (Fe, Co, Ni) from the alloys.     

Chemical shifts as a novel measure of interactions between two binding sites of symmetric dialkyldimethylammonium bromides to α-cyclodextrin

Complex formation of α-cyclodextrin (α-CD) with decyltrimethylammonium (DeTAB), N,N-dioctyldimethylammonium (DOAB), and N,N-didecyldimethylammonium bromides (DDeAB) was investigated by proton NMR spectroscopy. Analysis of chemical shifts yielded macroscopic 1:1 and 1:2 binding constants (K₁ and K₂) and chemical shift differences (Δδ_SD and Δδ_SD2) for the 1:1 and 1:2 complexes of DeTAB, DOAB, and DDeAB with α-CD. The K₁ and K₂ values of DDeAB were quantitatively explained on the basis of the assumption that the microscopic 1:1 binding constant of DDeAB is identical to the observed K₁ value of DeTAB. The K₂ value of DDeAB was also explained in terms of its observed K₁ value and the independent binding of two alkyl chains. Furthermore, the Δδ_SD and Δδ_SD2 values for protons of DDeAB and α-CD were quantitatively explained on the basis of the assumption that the geometry of the decyl group of DDeAB in an α-CD cavity is identical to that of DeTAB. The Δδ_SD value was also explicable on the basis of the same geometric assumption and the observed Δδ_SD2 value for this system. Similar results were obtained for the 1:1 and 1:2 DOAB-α-CD complexes.     

Syntheses of (5E)-PGE2 and New 6-Functionalized Derivatives by the Use of Palladium-Catalyzed Decarboxylative Allylic Alkylation

(5 )-Prostaglandin E₂ (7) was synthesized fron ( )-4- -butyldimethylsilyloxy-2-cyclopentenone (1) by 2-alkenyloxycarbonylatlon of the organocopper conjugate-addition adduct (3) followed by intramolecular palladium-catalyzed decarboxylative allylic alkylation. The (5 )-prostaglandin E₂ skeleton was also obtained from the β-keto allylic ester (11) by a similar decarboxylative allylic alkylation. The decarboxylative allylic alkylation of another type of the three-component coupling product (12) gave new 6-methyleneprostaglandin E1 skeleton (15a), which was converted into new 6-methylprosta-glandin I methyl ester (20) 6-methyleneprostaglandin F₁ derivative (16) by two different ways. The stereochemistry of this intramolecular decarboxylative allylic alkylation was discussed in the reaction of 2-[( )- or ( )-2-butenyloxy-carbonyl] cyclopentanone systems.     

Folding Dynamics of 10‐Residue β‐Hairpin Peptide Chignolin

Short peptides that fold into β‐hairpins are ideal model systems for investigating the mechanism of protein folding because their folding process shows dynamics typical of proteins. We performed folding, unfolding, and refolding molecular dynamics simulations (total of 2.7 μs) of the 10‐residue β‐hairpin peptide chignolin, which is the smallest β‐hairpin structure known to be stable in solution. Our results revealed the folding mechanism of chignolin, which comprises three steps. First, the folding begins with hydrophobic assembly. It brings the main chain together; subsequently, a nascent turn structure is formed. The second step is the conversion of the nascent turn into a tight turn structure along with interconversion of the hydrophobic packing and interstrand hydrogen bonds. Finally, the formation of the hydrogen‐bond network and the complete hydrophobic core as well as the arrangement of side‐chain–side‐chain interactions occur at approximately the same time. This three‐step mechanism appropriately interprets the folding process as involving a combination of previous inconsistent explanations of the folding mechanism of the β‐hairpin, that the first event of the folding is formation of hydrogen bonds and the second is that of the hydrophobic core, or vice versa.     

New base pairing motifs. The synthesis and thermal stability of oligodeoxynucleotides containing imidazopyridopyrimidine nucleosides with the ability to form four hydrogen bonds

The synthesis and thermal stability of oligodeoxynucleotides (ODNs) containing imidazo[5',4':4,5]pyrido[2,3-d]pyrimidine nucleosides 1-4 (N(N), O(O), N(O), and O(N), respectively) with the aim of developing two sets of new base pairing motifs consisting of four hydrogen bonds (H-bonds) is described. The proposed four tricyclic nucleosides 1-4 were synthesized through the Stille coupling reaction of a 5-iodoimidazole nucleoside with an appropriate 5-stannylpyrimidine derivative, followed by an intramolecular cyclization. These nucleosides were incorporated into ODNs to investigate the H-bonding ability. When one molecule of the tricyclic nucleosides was incorporated into the center of each ODN (ODN I and II, each 17mer), no apparent specificity of base pairing was observed, and all duplexes were less stable than the duplexes containing natural G:C and A:T pairs. On the other hand, when three molecules of the tricyclic nucleosides were consecutively incorporated into the center of each ODN (ODN III and IV, each 17mer), thermal and thermodynamic stabilization of the duplexes due to the specific base pairings was observed. The melting temperature (T(m)) of the duplex containing the N(O):O(N) pairs showed the highest T(m) of 84.0 degrees C, which was 18.2 and 23.5 degrees C higher than that of the duplexes containing G:C and A:T pairs, respectively. This result implies that N(O)and O(N) form base pairs with four H-bonds when they are incorporated into ODNs. The duplex containing N(O):O(N) pairs was markedly stabilized by the assistance of the stacking ability of the imidazopyridopyrimidine bases. Thus, we developed a thermally stable new base pairing motif, which should be useful for the stabilization and regulation of a variety of DNA structures.     

Electrochemistry of monoazahemin reconstituted myoglobin at an indium oxide electrode

Monoazahemin reconstituted myoglobin was prepared and its electrochemical behavior was studied in comparison with native myoglobin. For both myoglobins well-defined voltammograms were clearly obtained at highly hydrophilic surfaces of indium oxide electrodes. Although monoazahemin showed a more positive redox potential than hemin (measured in methanol), monoazahemin reconstituted myoglobin showed a more negative redox potential than native myoglobin in a 50 mM bis-Tris buffer solution (pH 6.5), suggesting that for both native and reconstituted myoglobins the heme environment including proximal histidine as an axial ligand of the redox center plays an important role in determining the redox potential. Also, a unique electrochemical response of cyano-monoazahemin reconstituted myoglobin was demonstrated.     

Determination of trace concentrations of antimony by the introduction of stibine into an inductively-coupled plasma for atomic emission spectrometry

A simple, rapid and sensitive method is described for the determination of trace concentrations of antimony by inductively-coupled plasma atomic emission spectrometry with hydride generation. Hydrochloric acid (1 M) is the best medium for stibine generation, but antimony(III) is also effectively reduced to stibine in 1 M malic acid or 0.5 M tartaric acid, whereas antimony(V) gives no significant signal in either of these acids. This permits the differential determination of Sb(III) and Sb(V). Most of the inter-element interference effects can be minimized by thiourea, bur standard additions are recommended for accurate determinations. Thiourea is also effective in prereducing Sb(V) to Sb(III). The detection limit is 0.19 ng Sb ml^?1 and the calibration graph is linear up to 100 μg ml^?1. The r.s.d, at 1 and 100 ng Sb ml^?1 are 3.8 and 2.1%, respectively. The method is applied to copper metal and to speciation of antimony in waste water.     

End‐functionalization of polystyrene by malto‐oligosaccharide generating aggregation‐tunable polymeric reverse micelle

This article describes that glucose, maltose, maltotriose, maltotetraose, maltopentaose, and maltohexaose ( a , b , c , d , e , and f , respectively) were introduced into the initiating chain‐end of polystyrene (PSt) through the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO)‐mediated radical polymerization. A series of glycoconjuaged TEMPO‐adducts, 1a–f , was synthesized and used as the initiators for the polymerization of styrene (St) for 6 h at 120 °C to afford the end‐functionalized PSt's with the acetyl saccharides, 2a–f , in the yields of 37–43%. For 2a–f obtained by the polymerizations using the [St]/[ 1 ] of 125, 250, and 500, the number‐average molecular weights determined by size exclusion chromatography (SEC), M_n,SEC's, were 4800–6300, 8800–10,600, and 18,400–25,200, respectively, which fairly agreed with the predicted values. The end‐functionalized PSt's with saccharides, 3a–f , which were obtained from the deacetylation of 2a–f using sodium methoxide in dry THF, formed the polymeric reverse micelles consisting of a saccharide‐core and a PSt‐shell in chloroform and toluene. The static laser light scattering (SLS) measurements provided the average molar mass of the aggregates in toluene, M_w,SLS's, which ranged from 7.50 × 10⁴ to 1.77 × 10⁵ for 3a , from 1.90 × 10⁵ to 4.93 × 10⁵ for 3b , from 4.41 × 10⁵ to 7.21 × 10⁵ for 3c , from 5.85 × 10⁵ to 8.51 × 10⁵ for 3d , from 7.55 × 10⁵ to 8.53 × 10⁵ for 3e , and from 8.54 × 10⁵ to 9.26 × 10⁵ for 3f . The aggregation numbers, N_agg's, which were calculated from the M_w,SLS's, were from 7 to 24 for 3a , from 20 to 37 for 3b , from 34 to 89 for 3c , from 39 to 116 for 3d , from 41 to 145 for 3e , and from 31 to 146 for 3f . It was confirmed that the aggregation property, such as the M_w,SLS or N_agg values, was strongly related to the polymerization degrees of St (DP's) or the number of the glucose residues (n's) for 3a–f . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4864–4879, 2006