Survey of residual tetracyclines in kidneys of diseased animals in Aichi Prefecture, Japan (1985-1997)

A survey was conducted to determine the incidence of tetracycline antibiotic (TCAs) residues in the kidneys of slaughtered animals that did not pass inspection for human consumption by the Japanese Food Sanitation Law and the Meat Inspection Law at the slaughterhouses in Aichi Prefecture, Japan, from April 1985 to March 1998. The kidneys were analyzed by the AOAC Official Method 995.09. Among 424 animals (147 cattle and 277 pigs), 131 (30.9%) were contaminated with TCAs, including 69 (16.3%) with chlortetracycline (CTC), 61 (14.4%) with oxytetracycline (OTC), 3 (0.7%) with tetracycline (TC), and 1 (0.2%) with doxycycline (DC). One sample (cattle kidney) was contaminated with both OTC and DC. The frequencies of OTC and TC residues were significantly higher (p < 0.05) in cattle than in pigs, whereas, the frequency of CTC was significantly higher (p < 0.01) in pigs. Pig kidney samples collected in 1991-1997 had significantly higher incidences of TCAs and CTC (p < 0.01) residues than those in 1985-1986.     

The surjectivity of the canonical homomorphism from singular homology to Cech homology

Let be a locally -connected compact metric space. Then, the canonical homomorphism from the singular homology group to the Cech homology group is surjective. Consequently, if a compact metric space is locally connected, then the canonical homomorphism from to is surjective.

     

Synthesis and properties of sulfonated poly(arylene ether)s containing azole groups

Random and multiblock sulfonated poly(arylene ether sulfone)s (SPEs) containing various azole groups such as oxadiazole and triazole were synthesized and characterized for fuel cell application. Successful preparation of SPE membranes depended on the structure of azole groups, which affected solubility of precursors and the resulting SPEs. Although oxadiazole groups were incorporated into hydrophobic component, they were found to be hydrophilic to give higher proton conductivity. Introduction of oxadiazole groups into random SPE gave comparable proton conductivity to that of Nafion NRE at >60% relative humidity at 80 °C. Block copolymer structure further increased the proton diffusion coefficient without increasing ion exchange capacity. Hydrolytic and oxidative stability of the SPE membranes was affected by both hydrophilic and hydrophobic components. Oxadiazole groups gave negative impact on hydrolytic and mechanical stability to the SPE membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reliability tests for Weibull distribution with variational shape parameter based on sudden death lifetime data

In the traditional design of reliability tests for assuring the mean time to failure (MTTF) in Weibull distribution with shape and scale parameters, it has been assumed that the shape parameter in the acceptable and rejectable populations is the same fixed number. For the purpose of expanding applicability of the reliability testing, Hisada and Arizono have developed a reliability sampling scheme for assuring MTTF in the Weibull distribution under the conditions that shape parameters in the both populations do not necessarily coincide, and are specified as interval values, respectively. Then, their reliability test is designed using the complete lifetime data. In general, the reliability testing based on the complete lifetime data requires the long testing time. As a consequence, the testing cost becomes sometimes expensive. In this paper, for the purpose of an economical plan of the reliability test, we consider the sudden death procedure for assuring MTTF in Weibull distribution with variational shape parameter.     

The First Observation of the Temperature-Dependent Phenomenon of Muon Catalyzed Fusion in Solid D–T Mixtures

A systematic study on muon catalyzed fusion (μCF) was conducted in solid deuterium and tritium (D–T) mixture. A variety of experimental conditions were investigated, i.e., tritium concentrations from 20 to 70%, temperatures from 5 to 16 K. A preliminary analysis result suggests a steep decrease in the dtμ-molecule formation rate with decreasing temperature, and also an increase in the probability for a muon reactivation after an α-sticking phenomenon. This revised version was published online in August 2006 with corrections to the Cover Date.     

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.     

Growth of GaN single crystals with extremely low dislocation density by two-step dislocation reduction

We have discovered a mechanism which can significantly reduce the dislocation density during the growth of GaN single crystals in the Na flux method. The significant reduction of the dislocation density occurs in the later stage of LPE growth, rather than solely at the seed-LPE interface for which we have already reported evidence indicating the presence of bundling dislocations. The two-step dislocation reduction is the key in achieving extremely low dislocation density using this method.     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Interlaboratory comparison of actinides in human tissue239Pu and240Pu

An international laboratory intercomparison of actinides in human tissues was organized by the United States Transuranium Registry and the National Institute of Standards and Technology. Five laboratories from the United States, United Kingdom, and Japan participated in the intercomparison. The laboratories were requested to analyze Standard Reference Materials 4351 (Human Lung) and 4352 (Human Liver) for²³⁹Pu and²⁴⁰Pu concentration. Approximately equivalent measurement capabilities were generally found among the participants. The results of this intercomparison were statistically comparable to those used for the original certification of the SRM's and were combined for a re-evaluation of the certified values. The combined data sets provide a better characterization of the inhomogeneity of these reference materials and result in a better basis for certification.Deceased.