The use of microemulsions in flow injection analysis: Spectrofluorimetric determination of primary amines

The use of microemulsion in flow-injection systems is considered, with particular reference to the determination of C₆C₁₀ primary amines by derivatization with o-phthal-aldehyde and 2-mercaptoethanol. Microemulsions provide an ideal interface for reactions between a water-soluble reagent and a non-aqueous sample. The effect of reaction conditions (R value, droplet concentration, pH and flow rate) on the fluorescence signal is discussed and calibration data for three primary alkylamines are given.     

A photochemical method for patterning the immobilization of ligands and cells to self-assembled monolayers

This work describes a chemically well defined method for patterning ligands to self-assembled monolayers (SAMs) of alkanethiolates on gold. This method begins with monolayers presenting a nitroveratryloxycarbonyl (NVOC)-protected hydroquinone which is photochemically irradiated to reveal a hydroquinone group. The resulting hydroquinone is then oxidized to the corresponding benzoquinone, providing a site for the Diels-Alder mediated immobilization of ligands. The rate constant for the photochemical deprotection is 0.032 s(-1) (with an intensity of approximately 100 mW/cm(2) between 355 and 375 nm), corresponding to a half-life of 21 s. The hydroquinone is oxidized to the benzoquinone using either electrochemical or chemical oxidation and then functionalized by reaction with a cyclopentadiene-tagged ligand. Two methods for patterning the immobilization of ligands are described. In the first, the substrate is illuminated through a mask to generate a pattern of hydroquinone groups, which are elaborated with ligands. In the second method, an optical microscope fit with a programmable translational stage is used to write patterns of deprotection which are then again elaborated with ligands. This technique is characterized by the use of well-defined chemical reactions to control the regions and densities of ligand immobilization and will be important for a range of applications that require patterned ligands for biospecific interactions.     

9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans

Reaction between some naphtho[2,1-b]pyrans and 1,1-diphenylethene affords 9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Study on the formation of the ketonic defects in the thermal degradation of ladder-type poly(p-phenylenes) by vibrational spectroscopy

We have investigated the thermal degradation in air by Fourier transform infrared spectroscopy of a ladder-type copolymer containing fluorene units in the backbone (Me-LPF), to reveal the formation of the ketonic defects. As thermal treatment of Me-LPF film at 200 degrees C in air proceeds, a new group of complex absorption bands due to degradation products arises in the range between 1800 and 1600 cm(-1). The observed overlapping bands were separated and assigned by utilizing the second-derivative IR spectral analysis, which can narrow the peak width to one-third of the originals and thereby eases the analysis. The degraded products were assigned as fluorenone (1718 cm(-1)) and benzophenone (Ar-(C=O)-Ar) (1665 cm(-1)), formed by the oxidation of the backbone, and acylphenone (Ar-(C=O)-R) (1685 cm(-1)) from the side chain. The fluorenone was found to be the major component among the degraded products in the main chain, and the time and temperature dependence indicated that the oxidation is a kind of autocatalytic radical-chain process. The oxidation can reach a very high degree (approximately 30% for 6 h oxidation at 240 degrees C estimated by absorption of the alkyl). Our results suggest the possibility of the oxidation of the 9-bialkylfluorene sites. We propose that the degradation of the alkyl in the side chain can help the radicals to propagate in the chain reaction.     

Total synthesis of (+)-xyloketal D, a secondary metabolite from the mangrove fungus Xylaria sp.

(+)-Xyloketal D was prepared in a one-pot multistep domino reaction by heating optically active 5-hydroxy-4-methyl-3-methylenepentan-2-one (R) in toluene with 2,4-dihydroxyacetophenone. The absolute configuration of the natural product was confirmed by preparation of the starting enone from a lactone of established absolute configuration.     

Selective adsorption of thorium on activated charcoal from electrolytic aqueous solution

The adsorption of thorium on activated charcoal has been studied as a function of shaking time, amount of adsorbent, pH, concentration of adsorbate and temperature. Adsorption of thorium obeys the Langmuir isotherm. H⁰ and S⁰ were calculated from the slope and intercept of ln K_D vs. 1/T plots. The influence of different anions and cations on thorium adsorption has been examined. The adsorption of other metal ions on activated charcoal has been studied under specified conditions to check its selectivity. Consequently, thorium was removed from Cs, Co, Ba, Cr, Sr, Cd, Cu, Mn and Zn. More than 98% adsorbed thorium on activated charcoal can be recovered with 55 ml 3M HNO₃ solution. Wavelength dispersive X-rays fluorescence spectrometer was used for measuring thorium concentration.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Adsorption of gadolinium on activated charcoal from electrolytic aqueous solution

Adsoprtion of gadolinium on activated charcoal has been studied as a function of shaking time, pH, concentration of adsorbate and temperature. Gadolinium adsorption obeys the Langmuir isotherm. H^o and S^o were calculated from the slope and intercept of the In K_D 1/T plot. The influence of different cations and anions on gadolinium adsorption has been examined. The adsorption of other metal ions on activated charcoal has been studied under optimum conditions to check the selectivity of gadolinium adsorption. Consequently, gadolinium was removed from Ni, V, Zn, Cu, Rb, Sr and Mn. More than 97% of the adsorbed gadolinium on activated charcoal can be recovered with 35 ml of 3M HNO₃ solution. Wavelength dispersive X-ray fluorescence spectrometer was used for measuring gadolinium concentration.