Structure of the Ba-induced Si(111)- (3 x 2) reconstruction

The Ba/Si(111) surface, previously known as a 3 x 1 phase, is found to have a 3 x 2 periodicity and a semiconducting band gap. The substrate reconstructs into the honeycomb chain-channel (HCC) structure with Ba atoms in the channel, as in the alkali-metal-induced Si(111)-(3 x 1). However, the metal coverage is determined to be 1/6 monolayers, half the alkali-metal coverage. We propose that the structure and the metal coverage determined for the Ba adsorbate is universal for other alkaline-earth-metal adsorbates. With the alkali-metal-induced 3 x 1 case, our results lead to a rule that one donated electron per 3 x 1 surface unit is necessary to stabilize the HCC reconstruction of Si.     

Thermodynamic phase diagram of the quantum hall skyrmion system

We numerically study the interacting quantum Hall Skyrmion system based on the Chern-Simons action. By noticing that the action is invariant under global spin rotations in the spin space with respect to the magnetic field direction, we obtain the low-energy effective action for a many-Skyrmion system. Performing extensive molecular dynamics simulations, we establish the thermodynamic phase diagram for a many-Skyrmion system.     

Electron spin resonance from annealed titania nanotubes

Titania nanotubes were prepared using a hydrothermal method. Hydrogen titanate nanotubes (H-TNTs) with an anatase phase changed to anatase nanocrystals at about 500 °C, and then a rutile structure at ∼800 °C. A sharp and symmetrical electron spin resonance (ESR) signal (g=2.003), attributed to a single-electron-trapped oxygen-vacancy (SETOV), was obtained at the annealed H-TNTs (T<500 °C). The SETOV signal increased and maximized remarkably at about 400–500 °C. Then, the nanotube structure appeared to be demolished. Yet, when the vacuum-heated H-TNTs were sealed in N₂ or Ar ambient, some additional ESR signals appeared besides the SETOV signal. The broad asymmetric ESR signal (g=1.98) was attributed to a surface oxygen vacancy related to the Ti³⁺ sites in a reduced TiO₂ matrix. The vacuum-heated sodium titanate nanotubes (Na-TNTs) showed only the SETOV signal (T<500 °C). PACS 61.46.Fg; 61.72.Ji; 76.30.-v     

Magnetic response of microbially synthesized transition metal- and lanthanide-substituted nano-sized magnetites

The magnetic susceptibility (κ_RT) and saturation magnetization (M_S) of microbially synthesized magnetites were systematically examined. Transition metal (Cr, Mn, Co, Ni and Zn)- and lanthanide (Nd, Gd, Tb, Ho and Er)-substituted magnetites were microbially synthesized by the incubation of transition metal (TM)- and lanthanide (L)-mixed magnetite precursors with either thermophilic (TOR-39) or psychrotolerant (PV-4) metal-reducing bacteria (MRB). Zinc incorporated congruently into both the precursor and substituted magnetite, while Ni and Er predominantly did not. Microbially synthesized Mn- and Zn-substituted magnetites had higher κ_RT than pure biomagnetite depending on bacterial species and they exhibited a maximum κ_RT at 0.2 cationic mole fraction (CMF). Other TMs’ substitution linearly decreased the κ_RT with increasing substitution amount. Based on the M_S values of TM- and L-substituted magnetite at 0.1 and 0.02 CMF, respectively, Zn (90.7 emu/g for TOR-39 and 93.2 emu/g for PV-4)- and Mn (88.3 emu/g by PV-4)-substituted magnetite exhibited higher M_S than standard chemical magnetite (84.7 emu/g) or pure biomagnetite without metal substitution (76.6 emu/g for TOR-39 and 80.3 emu/g for PV-4). Lanthanides tended to decrease M_S, with Gd- and Ho-substituted magnetites having the highest magnetization. The higher magnetization of microbially synthesized TM-substituted magnetites by the psychrotroph, PV-4 may be explained by the magnetite formation taking place at low temperatures slowing mechanics, which may alter the magnetic properties compared to the thermophile, through suppression of the random distribution of substituted cations.     

Theoretical study on structure of boron nitride fullerenes

We propose the parameters of the Stillinger-Weber potential for hexagonal boron nitride (BN) structures. For the reliability of these parameters, the structural property of BN fullerenes is investigated. The stability of BN fullerenes increases with increasing the number of atoms, due to the reduction of the curvature effect of BN fullerenes. The structures of the relative stable fullerenes are B₁₆N₁₆, B₁₈N₁₈, B₂₂N₂₂, B₂₅N₂₅, and B₂₈N₂₈.     

Interfacial kinetic enhancement of metal ion adsorption on binary mixed self-assembled monolayers

The adsorption of metal ions, a type of surface reaction on binary mixed self-assembled monolayers (SAMs) on a gold surface composed of 1,6-hexanedithiol (HDT) with 11-mercaptoundecanoic acid (MUA), was monitored by in situ surface plasmon resonance (SPR) measurements. The differential SPR reflectance (ΔR) enables the kinetics of adsorption of Pt²⁺ on the mixed SAMs to be investigated. Unlike single HDT SAM, kinetic analyses of the mixed SAMs showed that the rate of adsorption of Pt²⁺ was enhanced and that it was highly dependent on the fraction of MUA present. These SPR measurements suggest that the adsorption rate of metal ions can be readily manipulated simply by using mixed SAMs.     

Influence of pretreatment methods on adsorption and catalytic characteristics of toluene over heterogeneous palladium based catalysts

The adsorption and catalytic characteristics of heterogeneous palladium based catalyst and its modified catalysts with gases (air and hydrogen) and acidic aqueous solution (HCl) were studied for evaluating the influence of pretreatment methods for toluene. The structural and energetic adsorption properties of the parent and pretreated catalysts were analyzed by means of nitrogen adsorption isotherms and gravimetric methods. The light-off curve and the XPS investigation were used for analyzing the catalytic activity and the surface state of palladium. It was clearly shown from the experimental results that hydrogen pretreated catalysts having metallic surface state exhibited the highest adsorption capacity and catalytic activity compared to that of parent and modified catalysts. The adsorption equilibrium data for toluene were obtained at three different temperatures and correlated successfully with the two-site Langmuir molecular isotherm model (L2m). It was also found that the palladium phase has more adsorption affinity for toluene molecules than the alumina support. The isosteric heat of adsorption calculated by using the Clausius-Clapeyron equation significantly changed with the coverage and the lateral interactions between the adsorbate-adsorbate molecules control the system. Furthermore, comparative analysis of the adsorption energy distribution revealed that the parent and its modified catalysts have different types of surface energetic heterogeneities.     

A novel infrared absorbing structure for uncooled infrared detector

In this paper, we proposed a novel infrared absorbing structure for uncooled infrared detectors. The infrared absorber makes use of a quarter-wavelength structure composed of a dielectric layer, a protecting layer, an active layer, a supporting layer and a reflecting layer. Sputtered amorphous silicon is used as a dielectric layer because of its high refractive index. We fabricated the uncooled microbolometer with the proposed infrared absorbing structure by surface micromachining method. Then we characterized various bolometric properties such as thermal conductance, thermal time constant, responsivity and infrared absorptance. The fabricated bolometer showed the thermal conductance of 6.72 × 10⁻⁷ W/K, the thermal mass of 4.43 × 10⁻⁹ J/K, the thermal time constant of 6.6 ms and the responsivity of 7.76 × 10³ V/W at 10 Hz chopper frequency and 9.22 μA bias current. From the results, the estimated absorptance is about 80%. We expect that the proposed absorbing structure shows high infrared absorption and high performance of uncooled microbolometer.     

Synthesis and characterization of thiazolothiazole‐based polymers and their applications in polymer solar cells

A novel series of thiazolothiazole (Tz)‐based copolymers, poly[9,9‐didecylfluorene‐2,7‐diyl‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P1), poly[9,9‐dioctyldibenzosilole‐2,7‐diyl‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P2), and poly[4,4′‐bis(2‐ethylhexyl)‐dithieno[3,2‐b:2′,3′‐d]silole‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P3), were synthesized for the use as donor materials in polymer solar cells (PSCs). The field‐effect carrier mobilities and the optical, electrochemical, and photovoltaic properties of the copolymers were investigated. The results suggest that the donor units in the copolymers significantly influenced the band gap, electronic energy levels, carrier mobilities, and photovoltaic properties of the copolymers. The band gaps of the copolymers were in the range of 1.80–2.14 eV. Under optimized conditions, the Tz‐based polymers showed power conversion efficiencies (PCEs) for the PSCs in the range of 2.23–2.75% under AM 1.5 illumination (100 mW/cm²). Among the three copolymers, P1, which contained a fluorene donor unit, showed a PCE of 2.75% with a short‐circuit current of 8.12 mA/cm², open circuit voltage of 0.86 V, and a fill factor (FF) of 0.39, under AM 1.5 illumination (100 mW/cm²). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of some 2-substituted-thioxanthones

This paper presents the synthesis of 2-amino-, 2-acetamido- and 2-benzamidothioxanthones and their 10,10-dioxides.