Rheo-optical properties of polyethylene films in the nonlinear viscoelastic region

A new apparatus was designed to investigate the dynamic viscoelastic properties of solid polymer materials in the nonlinear viscoelastic region. The apparatus was combined with a birefringence apparatus in such a way that birefringence could be measured simultaneously with stress under oscillatory deformation. The nonlinear viscoelastic behavior of bulk-crystallized high-density polyethylene films was examined. Nonlinearity of mechanical properties became evident around 30°C, while optical properties became markedly nonlinear around 50°C. The nonlinearity of viscoelastic properties changes very little when the films are swollen with tetrachloroethane. It is proposed that disruption of lamellae to crystallites in the drawing process is one of the most important causes of the nonlinear behavior of high-density polyethylene films.     

Cobalt-catalyzed regioselective [3+2] annulation of ortho-formyl and acetyl substituted phenylboronic acids with alkynes

Treatment of alkynes with ortho-formyl and acetyl phenylboronic acids in the presence of a cobalt catalyst resulted in the formation of 2,3-disubstituted indenols in good yields. When aryl silyl alkynes were used, 2-aryl-3-silyl indenols were obtained regioselectively in good yields.     

A helical flow, circular microreactor for separating and enriching "smart" polymer-antibody capture reagents

We report a mechanistic study of how flow and recirculation in a microreactor can be used to optimize the capture and release of stimuli-responsive polymer-protein reagents on stimuli-responsive polymer-grafted channel surfaces. Poly(N-isopropylacrylamide) (PNIPAAm) was grafted to polydimethylsiloxane (PDMS) channel walls, creating switchable surfaces where PNIPAAm-protein conjugates would adhere at temperatures above the lower critical solution temperature (LCST) and released below the LCST. A PNIPAAm-streptavidin conjugate that can capture biotinylated antibody-antigen targets was first characterized. The conjugate's immobilization and release were limited by mass transport to and from the functionalized PNIPAAm surface. Transport and adsorption efficiencies were dependent on the aggregate size of the PNIPAAm-streptavidin conjugate above the LCST and also were dependent on whether the conjugates were heated in the presence of the stimuli-responsive surface or pre-aggregated and then flowed across the surface. As conjugate size increased, through the addition of non-conjugated PNIPAAm, recirculation and mixing were shown to markedly improve conjugate immobilization compared to diffusion alone. Under optimized conditions of flow and reagent concentrations, approximately 60% of the streptavidin conjugate bolus could be captured at the surface and subsequently successfully released. The kinetic release profile sharpness was also strongly improved with recirculation and helical mixing. Finally, the concentration of protein-polymer conjugates could be achieved by continuous conjugate flow into the heated recirculator, allowing nearly linear enrichment of the conjugate reagent from larger volumes. This capability was shown with anti-p24 HIV monoclonal antibody reagents that were enriched over 5-fold using this protocol. These studies provide insight into the mechanism of smart polymer-protein conjugate capture and release in grafted channels and show the potential of this purification and enrichment module for processing diagnostic samples.     

Reverse micelle synthesis of perovskite oxide nanoparticles

La_0.6Sr_0.4Co_xFe_1−xO_3−δ (LSCF), La_0.6Sr_0.4Cu_0.2Fe_0.8O_3−δ, Ba_0.5Sr_0.4Co_0.8Fe_0.2O_3−δ and LaFeO_3−δ nanoparticles were synthesized by a reverse micelle procedure. Controlling the size of the micelles through the water:oil phase ratio enabled synthesis of phase pure perovskite particles with average sizes from 14 nm to 50 nm. Small amounts of an impurity phase, likely cobalt oxide, were detected in the XRD spectrum of high cobalt content samples of LSCF (x = 0.8). La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ nanoparticles were utilized to coat the surface of a dense thin-film La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ solid oxide fuel cell cathode. The polarization resistance of the nanoparticle coated electrode, measured at open circuit in air at 973 K, was 20% lower than an equivalent un-coated electrode.     

Physics in plasmonic and Mie scattered near-field for efficient surface-enhanced Raman scattering template

We describe the physics of the SERS based on the optical near-field intensity enhancement on the metallic (plasmonic) and the nonmetallic (Mie scattering) nanostructured substrates with two-dimensional (2D) periodic nanohole arrays. The calculation by the Finite-Difference Time-Domain (FDTD) method revealed that the optical intensity enhancement increases with the increase of the thickness of a gold film coating on the nonmetallic (dielectric) nanostructured Si, GaAs, and SiC substrates. The resonance spectrum shifts with the changes in the geometrical structure of the void diameter and inter-void distance. It was clarified that the optical intensity enhancement obtained with the gold-coated substrate is equivalent to that with a gold substrate at 70-nm thick gold coating on the dielectric substrates in this structure. The resonance spectral bandwidth for Mie scattering and plasmonic near-fields is different. Therefore, if the Stokes line of the Raman scattering is located within the resonance bandwidth, the SERS signal is enhanced proportionally to the fourth power of the electric near-field. However, if the Stokes shift is located out of the resonance bandwidth, the SERS signal enhancement is only proportional to the square of the scattered near-field.     

Pharmacokinetic properties of N‐nitrosofenfluramine after its administration to rats

N‐Nitrosofenfluramine (N‐Fen), a synthetic adulterant in Chinese herbal diet products, is believed to cause hepatotoxicity in people who use these products. N‐Fen is a relatively new compound, and thus pharmacological and toxicological studies are insufficient. The aim of this work was to (1) define N‐Fen's plasma pharmacokinetics and tissue distribution after single intraperitoneal (i.p.) administration of 25 mg/kg to rats; (2) define its bioavailability; and (3) identify fenfluramine (Fen) and norfenfluramine (Norf) as N‐Fen metabolites. N‐Fen rapidly appeared in the circulation and was distributed to all tissues. Norf was found to be the primary metabolite and not Fen. Plasma and tissue levels of N‐Fen and Norf were low with bioavailability of N‐Fen after i.p. administration was <3%. The AUC_0−t of N‐Fen in the liver and kidney were 6.6 and 12.1 times, respectively, greater than the brain, and 17.8 and 32.6 times, respectively, greater than the plasma. In conclusion, N‐Fen did not show local accumulation in the liver, the site of toxicity, with concentrations represented as percentage of the total dose ranginng from 0.008 to 0.122%; hence the cause of hepatotoxicity could be related to the mechanisms other than toxicity consequences accumulation. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of well‐defined and end‐polymerizable star‐shaped polysulfides and their application to negative photoresist

Various star‐shaped poly(phenoxy propylene sulfide)s (PPSs) bearing curable end groups were synthesized by the functionalization of the propagating ends of star‐shaped poly(PPS) with various electrophilies. The functionalization with chloromethyl styrene proceeded quantitatively, and afforded polymers with M_n almost agreed with theoretical value and narrow M_w/M_n. The photocuring conditions were optimized, and the addition of 10 wt % of poly(ethylene glycol) diacrylate was effective to attain sufficient crosslinking. The photocuring reaction of the end‐functionalized poly(PPS) films cast on silicon wafers was conducted by UV irradiation. The cured poly (PPS)s became insoluble in THF, supporting the sufficient crosslinking. Developing of a cured polymer yielded a negative photoresist pattern. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010