Diatropicity of 3,4,7,8,9,10,13,14-octadehydro[14]annulenes: a combined experimental and theoretical investigation

The synthesis and study of a series of octadehydro[14]annulenes is described. The aromaticity of these annulenes was investigated through examination of experimental data from arene-fused systems as well as calculated nucleus-independent chemical shifts (NICS) and bond lengths. Benzene ring fusion to the parent system results in a stepwise loss in aromaticity as the number of fused rings is increased from one to two to three. This decrease in annulenic ring current is manifested in the alkene proton chemical shifts (0-2 benzenes) as well as the NICS (0-3 benzenes). Comparison of isomeric thiophene-fused annulenes shows further evidence of ring current competition as these allow for observation of intermittent degrees of delocalization throughout the annulenic core. A consistent relationship between the magnitude of the NICS values and the degree of benzannelation is also observed.     

New diamide-diamine ligands and their zirconium and hafnium dichloride and bis(dimethylamide) complexes

The multigram syntheses of the protio ligands (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHSiMe(2)R)(2) (R = Me, H(2)N(2)NN' 3; R = (t)Bu, H(2)N(2)NN() 4) are described via reactions of the previously reported (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NH(2))(2) (1). A new synthesis of 1 is reported starting from 2-aminomethylpyridine and N-tosylaziridine, proceeding via (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2) (2). Reaction of H(2)N(2)NN' or H(2)N(2)NN* with (n)BuLi gives good yields of the dilithiated derivatives Li(2)N(2)NN' and Li(2)N(2)NN*. Reaction of H(2)N(2)NN' or H(2)N(2)NN* with [MCl(2)(CH(2)SiMe(3))(2)(Et(2)O)(2)] gives the cis-dichloride complexes [MCl(2)(L)] (L = N(2)NN', M = Zr 7 or Hf 8; L = N(2)NN(), M = Zr 9). The corresponding reactions of H(2)N(2)NN' or H(2)N(2)NN* with [Zr(NMe(2))(4)] afford the bis(dimethylamide) derivatives [Zr(NMe(2))(2)(L)] (L = N(2)NN' 10 or N(2)NN* 11). All of these protonolysis reactions proceed smoothly and in good yields. Attempts to prepare the titanium complexes [Ti(X)(2)(N(2)NN')] (X = Cl or NMe(2)) were unsuccessful. The X-ray crystal structures of (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2).EtOH, [ZrCl(2)(N(2)NN')].0.5C(6)H(6), [Zr(NMe(2))(2)(N(2)NN')], and [Zr(NMe(2))(2)(N(2)NN*)] are reported.     

In situ tissue pathology from spatially encoded mass spectrometry classifiers visualized in real time through augmented reality

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data. Spatially encoded pathology classifications are displayed at the site of laser sampling as color-coded pixels in an augmented reality video feed of the surgical field of view. This is enabled by two-way communication between surgical navigation and mass spectrometry data analysis platforms through a custom-built interface. Performance of the system was evaluated using murine models of human cancers sampled in situ in the presence of body fluids with a technical pixel error of 1.0 ± 0.2 mm, suggesting a 84% or 92% (excluding one outlier) cancer type classification rate across different molecular models that distinguish cell-lines of each class of breast, brain, head and neck murine models. Further, through end-point immunohistochemical staining for DNA damage, cell death and neuronal viability, spatially encoded PIRL-MS sampling is shown to produce classifiable mass spectral data from living murine brain tissue, with levels of neuronal damage that are comparable to those induced by a surgical scalpel. This highlights the potential of spatially encoded PIRL-MS analysis for in vivo use during neurosurgical applications of cancer type determination or point-sampling in vivo tissue during tumor bed examination to assess cancer removal. The interface developed herein for the analysis and the display of spatially encoded PIRL-MS data can be adapted to other hand-held mass spectrometry analysis probes currently available.

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data.     

Benzannelated analogs of phenanthro[1,2-b]- and [2,1-b]thiophene: Synthesis and structural characterization by two-dimensional NMR and X-ray techniques

Syntheses of benzo[3,4]phenanthro[1,2-b]thiophene, benzo[3,4]phenanthro[2,1-b]thiophene and their 1-methyl analogs are reported as potential constituents of solvent refined coal liquids and for mutagenicity testing. The attempted synthesis of the 13-methyl analogs which gave the 11-methyl isomers is also described. Total assignments of the ¹H- and ¹³C-nmr spectra based on long range optimized heteronuclear protoncarbon two-dimensional chemical shift correlation are reported. Carbon assignments obtained for benzo[3,4]-phenanthro[1,2-b]thiophene using this approach were confirmed with a 125 MHz ¹³C–¹³C INADEQUATE spectrum. X-Ray crystal structures were determined for benzo[3,4]phenanthro[1,2-b]thiophene and 1-methyl-benzo[3,4]phenanthro[2,1-b]thiophene. Both molecules were helically distorted from planarity. Close intramolecular contacts between the bay region H1–H13 and ClMe-H13 of 2.03 and 2.28 Å, respectively, were responsible for the distortions. There were no close intermolecular contacts of <3.5Å. both molecules refined to an R value of <0.05.     

Controlling cell attachment selectively onto biological polymer-colloid templates using polymer-on-polymer stamping

A new patterning approach using polymer-on-polymer stamping (POPS) has been developed to fabricate polymer-colloid templates for controlling selective cell attachment. In this paper, a polyamine surface patterned onto a poly(acrylic acid)/poly(allylamine hydrochloride) (PAA/PAH) cell resistant multilayer platform serves as a template for the deposition of close- or loose-packed colloidal particles. Peptides containing the RGD adhesion sequence were used to modify the PAH/colloid surface for specific cell attachment. Cell behavior was studied by varying colloidal packing array density, pattern geometry, and surface chemistry. It was found that loose-packed RGD-modified colloidal arrays enhance cell adhesion, as observed through the development of focal adhesion contacts and orientation of actin stress fibers, but close-packed colloidal arrays induce a rounded and nonadhesive cell morphology and yield a smaller number of attached cells. On loose-packed arrays, cells adjust their shapes to the pattern geometry when the stripe width is smaller than 50 microm and increase their extent of attachment when the concentration of surface RGD peptides is increased. This new biomaterials system allows the examination of cell behavior as a function of RGD surface distribution on the molecular to micrometer scale and reveals cellular response to different surface roughnesses.     

The effect of vicinyl olefinic halogens on cross-coupling reactions using Pd(0) catalysis

(trans) 1-Chloro-2-iodoethylene (3), (trans) 1-bromo-2-iodoethylene (4), (trans) 1,2-diiodoethylene (5) and (cis and trans) 1,2-dibromoethylene (11) were reacted under Suzuki, Sonogashira and Negishi cross-coupling conditions using Pd catalysis to obtain mono coupled products. Only olefin template 3 provided the desired coupling products reliably under all reaction conditions. Compound 5 did not provide cross coupled products under any of the reaction conditions used. The Negishi reaction was the only one that worked for templates 4 and 11. Studies indicate that oxidative addition of the most reactive carbon-halogen bond to Pd(0) is followed by elimination of the second halide, when the second halide is a bromide or an iodide. This happens to a much lesser degree when the second halogen is a chloride.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.     

Synthesis and thermal cyclization of an enediyne-sulfonamide

The synthesis of an enediyne sulfonamide by alkylidene carbene rearrangement is reported. The compound cyclizes thermally to give the Bergman product, which was prepared independently for comparison. Like other σ-acceptor substituents at the enediyne alkyne termini, such as fluoride, oxonium or ammonium groups, the sulfonamide moiety enhances the reactivity for thermal Bergman cyclization as shown by the cyclization kinetic of the title compound.     

Hydrogels of poly(hydroxyethyl methacrylate) and hydroxyethyl methacrylate—glycerol monomethacry-late copolymers

Hydrophilic three-dimensional polymer networks (hydrogels) were prepared from hydroxyethyl methacrylate (HEMA) and the copolymer HEMA and glycerol monomethacrylate (GMMA). The equilibrium water content of the hydrogels in water was investigated as a function of the initial dilution of the polymerization mixture, the type of solvent, and the hydrophilicity of the polymer. The initial dilution was found to have a decisive effect on the swelling or deswelling of hydrogels after the completion of the gel formation. With relatively less hydrophilic hydrogels, there is a critical initial dilution to produce the gel which does not swell or deswell in water after the gel formation. This “isovolumic” initial dilution shifts toward a higher dilution as the hydrophilicity of the hydrogels increases; however, when hydrophilicity of the polymer rises above a certain point, gels always swell in water. Permeability of oxygen through hydrogels was also studied.     

Ground vs. excited state electron transfer: adsorbed monolayers and trimers in solution

Transient emission spectroscopy has been used to probe the rate of photoinduced electron transfer between metal centres within a novel trimeric complex [[Os(bpy)2(bpe)2][Os(bpy)2Cl]2]4+, where bpy is 2,2'-bipyridyl and bpe is trans-1,2-bis-(4-pyridyl)ethylene. Transient emission experiments on the trimer, and on [Os(bpy)2 (bpe)2]2+ in which the [Os(bpy)2 Cl]+ quenching moieties are absent, reveal that the rate of photoinduced electron transfer (PET) across the bpe bridge is 1.3 +/- 0.1 x 10(8) s(-1). Investigations into the driving forces for oxidation and reduction of the electronically excited state within the trimer indicate that quenching of the [Os(bpy)2 (bpe)2]2+ centre within the trimer involves electron transfer from the [bpe Os(bpy)2 Cl]+ centres to the electronically excited state with a driving force of -0.3 eV. Monolayers of the complex, [Os(bpy)2 bpe pyridine]2+, have been formed by spontaneous adsorption onto platinum microelectrodes and used to probe the dynamics of electron transfer across the trans-1,2-bis-(4-pyridyl)ethylene bridge in the ground state. These monolayers are stable and exhibit well defined voltammetric responses for the Os2+/3+ redox reaction. Cyclic voltammograms recorded at high scan rates can be accurately modelled according to a non-adiabatic electron transfer model based on the Marcus theory using a standard heterogeneous electron transfer rate constant, k(o), of 3.1 +/- 0.2 x 10(4) s(-1) and a reorganization energy of 0.4 +/- 0.1 eV. This rate constant is a factor of approximately two orders of magnitude smaller than that found for photoinduced electron transfer across the same bpe bridge for identical driving forces. This significant difference is interpreted in terms of both the nature of the orbitals involved in electrochemically and optically driven electron transfer, as well as the strength of electronic coupling between two molecular components as opposed to a molecular component and a metal electrode.