Study of temperature distribution of sliding block with asperity surface

In this study, a numerical thermal model is developed for sliding block contact under various loads, sliding velocities and surface roughness. The temperature distributions are shown for perfectly insulated thermal conditions along noncontact surfaces. For a particular five‐peaks contact model, the maximum temperature at the central peak is slightly lhigher than the others. The temperature profile decreases as the distance to the symmetry axis increases, and then decreases dramatically at the noncontact area. It is clear to see that the maximum temperature locates at the symmetry central peak of the asperity contact area instead of the leading head of the smooth surface. The maximum temperature rise parameter increases as the pressure, sliding velocity and asperity roughness increased or conductivity decreased. This phenomenon becomes obvious for cases at high pressure, velocity and roughness and low conductivity. Particularly, the influence of roughness is not significant for low velocity. Similar results are found for the maximum temperature rise parameter difference between peaks or peaks/valleys. The simulation results of this asperity surface sliding block contact model are able to provide essential information for the components of microelectro—mechanical systems (MEMS) and biochemical reaction mechanism. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization and photocatalytic activity of Fe- and N-co-deposited TiO2 and first-principles study for electronic structure

Titanium dioxide (TiO₂), co-deposited with Fe and N, is first implanted with Fe by a metal plasma ion implantation (MPII) process and then annealed in N₂ atmosphere at a temperature regime of 400-600 °C. First-principle calculations show that the (Fe, N) co-deposited TiO₂ films produced additional band gap levels at the bottom of the conduction band (CB) and on the top of the valence band (VB). The (Fe, N) co-deposited TiO₂ films were effective in both prohibiting electron-hole recombination and generating additional Fe-O and N-Ti-O impurity levels for the TiO₂ band gap. The (Fe, N) co-deposited TiO₂ has a narrower band gap of 1.97 eV than Fe-implanted TiO₂ (3.14 eV) and N-doped TiO₂ (2.16 eV). A significant reduction of TiO₂ band gap energy from 3.22 to 1.97 eV was achieved, which resulted in the extension of photocatalytic activity of TiO₂ from UV to Vis regime. The photocatalytic activity and removal rate were approximately two-fold higher than that of the Fe-implanted TiO₂ under visible light irradiation.     

Mesomorphism and luminescence properties of platinum(II) complexes with tris(alkoxy)phenyl-functionalized pyridyl pyrazolate chelates

A series of new mesomorphic platinum(II) complexes 1 – 4 bearing pyridyl pyrazolate chelates are reported herein. In this approach, pyridyl azolate ligands have been strategically functionalized with tris(alkoxy)phenyl groups with various alkyl chain lengths. As a result, they are ascribed to a class of luminescent metallomesogens that possess distinctive morphological properties, such as their intermolecular packing arrangement and their associated photophysical behavior. In CH₂Cl₂, independent of the applied concentration in the range 10^?6–10^?3 M , all Pt^II complexes exhibit bright phosphorescence centered at around 520 nm, which is characteristic for monomeric Pt^II complexes. In stark contrast, the single‐crystal X‐ray structure determination of [Pt(C4pz)₂] ( 1 ) shows the formation of a dimeric aggregate with a notable Pt???Pt contact of 3.258 Å. Upon heating, all Pt^II complexes 1 – 4 melted to form columnar suprastructures, for which similar intracolumnar Pt???Pt distances of approx. 3.4–3.5 Å are observed within an exceptionally wide temperature range (>250 °C), according to the powder XRD data. Upon casting into a neat thin film at RT, the luminescence of 1 – 4 is dominated by a red emission that spans 630–660 nm, which originates from the one‐dimensional, chainlike structure with Pt–Pt interaction in the ground state. Taking complex 4 as a representative, the emission intensity and wavelength were significantly decreased and blueshifted, respectively, on heating from RT to 250 °C. Further heating to liquefy the sample alters the red emission back to the green phosphorescence of the monomer. The results highlight the pivotal role of tris(alkoxy)phenyl groups in the structural versus luminescence behavior of these Pt^II complexes.     

Sensitive and simple flow injection analysis of formaldehyde using an activated barrel plating nickel electrode

A flow injection analysis coupled with electrochemical detection at an activated barrel plating nickel electrode (Ni-BPE) was developed as a sensitive, simple, and low-cost formaldehyde sensor. The mechanism of Ni-BPE toward the electrocatalytic oxidation of formaldehyde in alkaline medium at ambient temperature was proposed to be based on the electrocatalytic oxidation of formaldehyde by Ni(III)O(OH) species. Under the optimized conditions (flow rate = 1.2 mL/min; detection potential = +0.5 V versus Ag/AgCl), a good linearity in the window of 0.037 to 10 microg/mL formaldehyde was observed, and the LOD of 0.23 microg/L was calculated. The RSDs of intraday (n = 10) and interday (n = 6) replicate measurements of 0.185-5 microg/mL formaldehyde ranged from 1.45 to 3.60%, indicating good reproducibility of the proposed method. The proposed method was successfully applied to the determination of formaldehyde in commercial nail polish samples and a drinking water sample.     

Detecting small lung tumors in mouse models by refractive-index microradiology

Refractive-index (phase-contrast) radiology was able to detect lung tumors less than 1 mm in live mice. Significant micromorphology differences were observed in the microradiographs between normal, inflamed, and lung cancer tissues. This was made possible by the high phase contrast and by the fast image taking that reduces the motion blur. The detection of cancer and inflammation areas by phase contrast microradiology and microtomography was validated by bioluminescence and histopathological analysis. The smallest tumor detected is less than 1 mm(3) with accuracy better than 1 × 10(-3) mm(3). This level of performance is currently suitable for animal studies, while further developments are required for clinical application.     

Hybrid evolutionary algorithms in a SVR traffic flow forecasting model

Accurate urban traffic flow forecasting is critical to intelligent transportation system developments and implementations, thus, it has been one of the most important issues in the research on road traffic congestion. Due to complex nonlinear data pattern of the urban traffic flow, there are many kinds of traffic flow forecasting techniques in literature, thus, it is difficult to make a general conclusion which forecasting technique is superior to others. Recently, the support vector regression model (SVR) has been widely used to solve nonlinear regression and time series problems. This investigation presents a SVR traffic flow forecasting model which employs the hybrid genetic algorithm-simulated annealing algorithm (GA-SA) to determine its suitable parameter combination. Additionally, a numerical example of traffic flow data from northern Taiwan is used to elucidate the forecasting performance of the proposed SVRGA-SA model. The forecasting results indicate that the proposed model yields more accurate forecasting results than the seasonal autoregressive integrated moving average (SARIMA), back-propagation neural network (BPNN), Holt-Winters (HW) and seasonal Holt-Winters (SHW) models. Therefore, the SVRGA-SA model is a promising alternative for forecasting traffic flow.     

Crystallization of calcium sulfate on polymeric surfaces

Surface crystallization of calcium sulfate dihydrate (gypsum) on a series of polymeric surfaces was studied using a quartz microbalance system. Polyelectrolyte multilayer films (positively and negatively charged surfaces) were formed on the quartz crystal microbalance (QCM) sensors utilizing a layer-by-layer spin-assembly method. The kinetics of gypsum surface crystallization was quantified in terms of the evolution of gypsum mineral scale on the different surfaces. For comparison mineral scaling was also evaluated on silica and polyamide surfaces. For surfaces of the same charge polarity (+/-), the mass density of gypsum scale was lower (PSS相似文献   

New heterocycles of 2,3‐diaryl‐substituted maleic hydrazides

2,3‐Diaryl‐substituted maleic anhydrides were prepared by a modified one‐pot synthesis of Perkin condensation using mixed sodium salts of arylglyoxylic acid and arylacetic acid with acetic anhydride in 1,4‐dioxane. The treatment of these anhydrides with ammonium bicarbonate, or methanolic hydrazine, offered the corresponding 2,3‐diaryl‐substituted maleimides and maleic hydrazides (4,5‐diaryl‐substituted 1,2‐dihydropyridazine‐3,6‐dione), respectively. Evidence obtained from NMR, UV, and mass spectra suggest that 2,3‐diaryl‐substituted maleic hydrazides do not exhibit monolactim forms. Ring contraction of the diaryl‐substituted maleic hydrazide by nitrosation led to the formation of the corresponding maleimide. Interconversion between the corresponding maleic hydrazide and maleimide was observed following equilibrium reaction. Our experiment proposes that the chemistry of 2,3‐diaryl‐substituted maleic hydrazides rarely involves the function of ethylene moiety and resembles that of succinic hydrazine. J. Heterocyclic Chem.,(2011).     

Excited-state intramolecular proton transfer molecules bearing o-hydroxy analogues of green fluorescent protein chromophore

o-Hydroxy analogues, 1a-g, of the green fluorescent protein chromophore have been synthesized. Their structures and electronic properties were investigated by X-ray single-crystal analyses, electrochemistry, and luminescence properties. In solid and nonpolar solvents 1a-g exist mainly as Z conformers that possess a seven-membered-ring hydrogen bond and undergo excited-state intramolecular proton transfer (ESIPT) reactions, resulting in a proton-transfer tautomer emission. Fluorescence upconversion dynamics have revealed a coherent type of ESIPT, followed by a fast vibrational/solvent relaxation (<1 ps) to a twisted (regarding exo-C(5)-C(4)-C(3) bonds) conformation, from which a fast population decay of a few to several tens of picoseconds was resolved in cyclohexane. Accordingly, the proton-transfer tautomer emission intensity is moderate (0.08 in 1e) to weak (～10(-4) in 1a) in cyclohexane. The stronger intramolecular hydrogen bonding in 1g suppresses the rotation of the aryl-alkene bond, resulting in a high yield of tautomer emission (Φ(f) ≈ 0.2). In the solid state, due to the inhibition of exo-C(5)-C(4)-C(3) rotation, intense tautomer emission with a quantum yield of 0.1-0.9 was obtained for 1a-g. Depending on the electronic donor or acceptor strength of the substituent in either the HOMO or LUMO site, a broad tuning range of the emission from 560 (1g) to 670 nm (1a) has been achieved.     

A remark on the two dimensional water wave problem with surface tension

We consider the motion of a two-dimensional interface between air (above) and an irrotational, incompressible, inviscid, infinitely deep water (below), with surface tension present. We propose a new way to reduce the original problem into an equivalent quasilinear system which is related to the interface's tangent angle and a quantity related to the difference of tangential velocities of the interface in the Lagrangian and the arc-length coordinates. The new way is relatively simple because it involves only taking differentiation and the real and the imaginary parts. Then if assuming that waves are periodic, we establish a priori energy inequality.