Polymerization of Acrylamide in Aqueous Solution of Poly(N‐isopropylacrylamide) at Lower Critical Solution Temperature

Acrylamide (AAm) was found to polymerize in a solution of poly(N‐isopropylacrylamide) (PNIPAAm) in water at around its lower critical solution temperature (LCST) (32°C) without any initiators. This phenomenon was specifically observed in aqueous solutions of the polymers having LCST such as PNIPAAm and poly(methylvinylether) (PMVE). AAm polymerized only when PNIPAAm and AAm were dissolved in water below LCST of PNIPAAm and then the solution was warmed up to the polymerization temperature (40°C). On the other hand, the polymerization of AAm did not proceed when AAm was added into aqueous PNIPAAm solution during and after the phase separation above 32°C. Furthermore the polymerizability of AAm was remarkably affected by the concentration and molecular weight of the PNIPAAm additives. Under the condition of lower PNIPAAm concentration (0.30 mol/L), the increase in the molecular weight of PNIPAAm considerably increased the molecular weight of the resulting PAAm but decreased the yield of PAAm. Under the condition of higher PNIPAAm concentration (0.60 mol/L) the polymerizability was not so affected by the molecular weight of PNIPAAm, while the molecular weight of PAAm formed by using higher molecular weight PNIPAAm was higher than those of PAAm formed by using lower molecular weight PNIPAAm. Moreover, the molecular weight of PAAm formed by the PNIPAAm induced polymerization of AAm was much higher than that of the polymer obtained by the radical polymerization using AIBN in THF or VA‐ 061 in water.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Facile Synthesis of Oxamides by Efficient Trapping of Carbamoyl Lithiums with Isocyanates

Unsymmetrical oxamides are conveniently synthesized in good yields by a new trapping reaction of unstable carbamoyl lithiums with isocyanates.     

Where is the Oxygen? Structural Analysis of α‐Humulene Oxidation Products by the Crystalline Sponge Method

Crystal structures of α‐humulene, a cyclic sesquiterpene, and its oxidized subproducts, were analyzed by the crystalline sponge method. Regio‐ and stereochemistry, including absolute configuration when a chiral oxidant was applied, and the stable conformations of all the scaffold‐related compounds were successfully determined for samples on a 5–50 μg scale.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ⋅ 2 ) or a [3×3] cluster ( 1 ⋅ 2 ⋅ 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

Functional optical coherence tomography reveals localized layer-specific activations in cat primary visual cortex in vivo

Surface neural activity has been widely visualized using optical intrinsic signal imaging (OISI) from various cortical sensory areas. OISI of the cortical surface with a CCD camera gives integrated information across a depth of a few hundred micrometers. We visualize depth-resolved activation patterns of cat primary visual cortex by functional optical coherence tomography (fOCT). A comparison of the depth-integrated results of fOCT maps with the optical intrinsic signal profiles shows fairly good agreement. Our results reveal layer-specific activation patterns and indicate that the activation was not homogeneous.     

In vivo multispectral imaging of the absorption and scattering properties of exposed brain using a digital red–green–blue camera

Optical Review - To evaluate multi-spectral images of the absorption and scattering properties in the cerebral cortex of rat brain, we investigated spectral reflectance images estimated by the...     

Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue

The ability of chloroform solutions of p-diethylaminomethylthiacalix[4]arene 1 to extract platinum from HCl media was tested. As an ion-pair extractant, compound 1 had the highest platinum extraction ability among all the thiacalix[n]arene derivatives tested in this study. Compound 1 was a highly specific extractant for Pt(IV) ions from single-metal solutions and platinum-group metal solutions from automotive catalyst residue. Various conditions such as contact time, pH, concentration of 1, effect of chloride ions, effect of acidity and Pt(IV) concentration were studied. The distribution ratio of platinum ions (D) was calculated. The platinum complex stoichiometry ratio was obtained using slope analysis. The 1–Pt(IV) complex was characterised using X-ray photoelectron spectroscopy, FT-IR and ¹H NMR. Finally, the Pt(IV) extraction percentage of compound 1 was compared with that of previously reported thiacalix[n]arene-based extractants.     

Design of Ratiometric Fluorescent Probes Based on Arene–Metal‐Ion Interactions and Their Application to CdII and Hydrogen Sulfide Imaging in Living Cells

Non‐coordinative interactions between a metal ion and the aromatic ring of a fluorophore can act as a versatile sensing mechanism for the detection of metal ions with a large emission change of fluorophores. We report the design of fluorescent probes based on arene–metal‐ion interactions and their biological applications. This study found that various probes having different fluorophores and metal binding units displayed significant emission redshift upon complexation with metal ions, such as Ag^I, Cd^II, Hg^II, and Pb^II. X‐ray crystallography of the complexes confirmed that the metal ions were held in close proximity to the fluorophore to form an arene–metal‐ion interaction. Electronic structure calculations based on TDDFT offered a theoretical basis for the sensing mechanism, thus showing that metal ions electrostatically modulate the energy levels of the molecular orbitals of the fluorophore. A fluorescent probe was successfully applied to the ratiometric detection of the uptake of Cd^II ions and hydrogen sulfide (H₂S) in living cells. These results highlight the utility of interactions between arene groups and metal ions in biological analyses.