Prompt fission induced by antiproton annihilation at rest on heavy nuclei

Antiproton induced fission probabilities of U²³⁸, Bi²⁰⁹, Pb²⁰⁸ and Au¹⁷⁷ are reported together with the mass distribution of the fission fragments in the U²³⁸ and Bi²⁰⁹ cases. The charged particles multiplicities observed in co-incidence with fission have, also, been measured for U and Bi and are presented.Dedicated to Peter Armbruster on the occasion of his 60th birthday in recognition of his important contribution to modern Nuclear Physics     

Gas chromatographic analysis of flunixin in equine urine after extractive methylation

A quantitative method for the analysis of flunixin, 2-(2-methyl-3-trifluoromethylanilino) nicotinic acid, in equine urine by gas chromatography with nitrogen-phosphorus detection has been developed. Flunixin and the internal standard, mefenamic acid, N-(2,3-xylyl) anthranilic acid, were analysed after extractive methylation of the carboxylic acid group using methyl iodide. The extraction and alkylation conditions of flunixin and mefenamic acid have been studied. The detection limit of the method was 0.25 mumol/l flunixin in urine (74 ng/ml). Flunixin was found to be conjugated to 96.5% in equine urine, and the conjugate was spontaneously hydrolysed to free flunixin. This approach can also be used to confirm the presence of flunixin or mefenamic acid in horse urine in the doping control of racehorses.     

The effect of polymers on the phase behavior of balanced microemulsions: diblock-copolymer and comb-polymers

The effect of some amphipilic diblock-copolymers and comb-polymers on a balanced Winsor III microemulsion system is investigated with the quaternary system n-octyl-β-d-glucoside/1-octanol/n-octane/D₂O as basis system. The diblock-copolymers are polyethyleneoxide-co-polydodecenoxide (PEO _x PEDODO _y ) and polyethyleneoxide-co-polybutyleneoxide (PEO _x PEBU _y ), constituted of a straight chain hydrophilic part and a bulky hydrophobic part. Addition of the diblock-copolymer leads to an enhancement of the swelling of the middle phase by uptake of water and oil; a maximum boosting factor of 6 was obtained for PEO₁₁₁PEDODO₂₅. Nuclear magnetic resonance diffusometry yields the self-diffusion coefficients of all the components in the system. The diffusion experiments provide information on how the microstructure of the bicontinuous microemulsion changes upon addition of the polymers. The reduced self-diffusion coefficients of water and oil are sensitive to the type of polymer that is incorporated in the film. For the diblock-copolymers, as mainly used here, the reduced self-diffusion coefficient of oil and water will respond to how the polymer bends the film. When the film bends away from water, the reduced self-diffusion of the water will increase, whereas the oil diffusion will decrease due to the film acting as a barrier, hindering free diffusion. The self-diffusion coefficient of the polymer and surfactant are similar in magnitude and both decrease slightly with increasing polymer concentration.     

Electrocatalytic oxidation of reduced nicotinamide coenzymes by graphite electrodes modified with an adsorbed phenoxazinium salt,meldola blue

Meldola Blue (7-dimethylamino-1,2-benzophenoxazine) can be adsorbed on graphite to give chemically modified electrodes. The electrochemical redox reactions of the phenoxazine are fairly reversible at low coverages with an E′^o of ?175 mV vs. SCE at pH 7.0. The electrode was most stable in acid solutions, at pH 6.0 its electrochemical activity decreased by 15% during 2h. The adsorbed compound mediated electron transfer in the electrocatalytic oxidation of the nicotinamide coenzymes (NADH and NADPH). The formation of a charge transfer complex between Meldola Blue and the coenzyme is demonstrated by experiments with a rotating disk electrode. The complex decomposes in a rate limiting step (k₊₂=30 s^?1) to the oxidized coenzyme and the reduced Meldola Blue. The latter can be reoxidized in a fast electrochemical step. The overall result is an electrocatalytic oxidation at a voltage which is about 500 mV lower than at an unmodified electrode.     

Fluorescence imaging and point measurements of tissue: applications to the demarcation of malignant tumors and atherosclerotic lesions from normal tissue

The possibilities of using laser-induced fluorescence for tissue diagnostics are discussed. The tissue types investigated are malignant tumors and atherosclerotic lesions. Studies with natural autofluorescence as well as with fluorescent tumor markers are included in this paper. Fluorescence emission and decay data are presented for some tissue chromophores contributing to tissue autofluorescence. Optical spectroscopic characteristics of fluorescent malignant tumor markers are analyzed and instrumental designs for clinical applications are discussed. Images recorded with a multicolor fluorescence imaging system developed in Lund are presented.     

A Methodology for Temperature Correction When Using Two-Color Pyrometers - Compensation for Surface Topography and Material

In this investigation, the applicability of the two-color pyrometer technique for temperature measurements in dry hard turning of AISI 52100 steel was studied, where both machined surfaces as well as cutting tools were considered. The impacts of differing hard turned surface topography on the two-color pyrometer readings was studied by conducting temperature measurements on reference samples created using cutting tools with different degrees of tool flank wear. In order to conduct measurements in a controlled environment, a specially designed furnace was developed in which the samples were heated step-wise up to 1,000 °C in a protective atmosphere. At each testing temperature, the temperatures measured by the two-color pyrometer were compared with temperatures recorded by thermocouples. For all materials and surfaces as studied here, the two-color pyrometer generally recorded significantly lower temperatures than the thermocouples; for the hard turned surfaces, depending on the surface topography, the temperatures were as much as ~20 % lower and for the CBN cutting tools, ~13 % lower. To be able to use the two-color pyrometer technique for temperature measurements in hard turning of AISI 52100 steel, a linear approximation function was determined resulting in three unique equations, one for each of the studied materials and surfaces. By using the developed approximation function, the measured cutting temperatures can be adjusted to compensate for differing materials or surface topographies for comparable machining conditions. Even though the proposed equations are unique for the hard turning conditions as studied here, the proposed methodology can be applied to determine the temperature compensation required for other surface topographies, as well as other materials.     

Double Aztec diamonds and the tacnode process

Discrete and continuous non-intersecting random processes have given rise to critical “infinite-dimensional diffusions”, like the Airy process, the Pearcey process and variations thereof. It has been known that domino tilings of very large Aztec diamonds lead macroscopically to a disordered region within an inscribed ellipse (arctic circle in the homogeneous case), and a regular brick-like region outside the ellipse. The fluctuations near the ellipse, appropriately magnified and away from the boundary of the Aztec diamond, form an Airy process, run with time tangential to the boundary.     

Electronic structure of platinum at ultrahigh pressure

Abstract

Platinum is studied, theoretically, under very high compression. The calculated equation of state is found to agree well with the recent experimental data. At V/V₀ = 0.4, where V₀ is the experimental equilibrium volume, we find a transition from the face centered cubic structure (fcc), found at ambient pressure, to the body centered cubic structure (bcc). The calculated transition pressure is 26 Mbar. The stabilization of the bcc structure is explained by the eigen value sum.