Structural and magnetic properties of Fe doped NiO

Mott-Hubbard anti-ferromagnetic insulator, NiO shows p-type semiconducting behaviour due to vacancy at Ni²⁺ site in its bunsenite structure. We report the modification of structural and magnetic order in NiO on Fe doping. NiO samples at different Fe concentrations in the range 0 to 5 at.% have been prepared by chemical co-precipitation and post thermal decomposition method. Both structural and magnetic characterization reveal that with increasing Fe doping concentration, NiO evolves as a magnetically inhomogeneous state out of the parent homogeneous antiferromagnetic state. In addition, structural inhomogeneity was also observed with Fe precipitating to γ-Fe₂O₃ phase, the signature of which could be clearly seen for Fe content beyond 2 at.%. At lower Fe content however, some amount of Fe occupies lattice and interstitial sites in the NiO matrix and drive the latter to acquire ferromagnetic ordering, which was evident from a clear hysteresis loop at 300 K.      

Effect of cobalt substitution on microstructure and magnetic properties in ZnO nanoparticles

Ferromagentic semiconductors have been actively pursued because of their potential as spin polarized carrier sources and easy integration into semiconductor technology. One such material, ZnO has been shown to be a potential Diluted Magnetic Semiconductor (DMS). The appearance of ferromagnetism, however, is found to be sensitive to the processing conditions. We report synthesis of ZnO nanoparticles of size ∼20 nm by a simple co-precipitation technique using metal nitrates and NaOH as precipitant. The particles are self-organised and reveal single crystalline behaviour in electron diffraction pattern. Incorporation of Co in ZnO matrix leads not only to the reduction in crystallite size but also to the modification of the structure. At 5% Co, the particles are highly textured. The particles also aggregate and the aggregated mass have nearly rectangular shape as seen through TEM. Increasing Co to 10%, results into further reduction of particle size and the particles self organize in a line, which looks like nanofibers. This alignment of particles increases by increasing the Co content further. This type of growth of nanofibers above Co ≥ 10% is well correlated with the anisotropic peak broadening observed in the XRD spectra. In addition, Co substitute Zn site up to 20% without showing any extra phase in XRD spectra as compared to 7 to 10% in case of bulk. Transport and magnetic studies indicate that conductivity increases with increasing Co content, but carrier mediated ferromagnetism is absent down to 10 K.      

Evolution of surface morphology of NiO thin films under swift heavy ion irradiation

NiO nanoparticle thin films grown on Si substrates were irradiated by 107 MeV Ag⁸⁺ ions. The films were characterized by glancing angle X-ray diffraction and atomic force microscopy. Ag ion irradiation was found to influence the shape and size of the nanoparticles. The pristine NiO film consisted of uniform size (∼100 nm along major axis and ∼55 nm along minor axis) elliptical particles, which changed to also of uniform size (∼63 nm) circular shape particles on irradiation at a fluence of 3 × 10¹³ ions cm⁻². Comparison of XRD line width analysis and AFM data revealed that the particles in the pristine films are single crystalline, which turn to polycrystalline on irradiation with 107 MeV Ag ions.     

A comprehensive review on recent material development of passive direct methanol fuel cell

Direct methanol fuel cells (DMFCs) within all types of fuel cells are the most viable alternative to lithium-ion batteries in the portable application and recently attracted much attention. This study reviews on passive DMFC material development with emphasis on to the performance activity, cost, durability and stability aspect. This paper has reported the basic desirable characteristics of each component with their material development. This paper has reviewed all possible materials of passive DMFC component, which can make the passive DMFC compact and feasible energy source in the future.     

Observation of grain growth in swift heavy ion irradiated NiO thin films

NiO thin films grown on Si(100) substrates by electron beam evaporation, were sintered at 500 °C and 700 °C. The films were irradiated with 120 MeV Au⁹⁺ ions. Irradiation had different effects depending upon the initial microstructure of the films. Irradiation of the films at a fluence of 3 × 10¹¹ ions cm⁻² leads to grain growth for the films sintered at 500 °C and grain fragmentation for the films sintered at 700 °C. At still higher fluences of irradiation, grain size in 500 °C sintered film decreased, but the same improved in 700 °C sintered film. Associated with the grain size, texturing of the films was also shown to undergo significant modifications under irradiation.     

Fabrication of a nanostructured gold-polymer composite material

A facile synthesis route is described for the preparation of a poly-(o-aminophenol)-gold nanoparticle composite material by polymerization of o-aminophenol (AP) monomer using HAuCl₄ as the oxidant. The synthesis was carried out in a methanol medium so that it could serve a dual solvent role, a solvent for both the AP and the water solution of HAuCl₄. It was found that oxidative polymerization of AP leads to the formation of poly-AP with a diameter of 50±10nm, while the reduction of AuCl₄ ^- results in the formation of gold nanoparticles (∼ 2nm). The gold nanoparticles were uniformly dispersed and highly stabilized throughout the macromolecular chain that formed a uniform metal-polymer composite material. The resultant composite material was characterized by means of different techniques, such as UV-vis, IR and Raman spectroscopy, which offered the information about the chemical structure of polymer, whereas electron microscopy images provided information regarding the morphology of the composite material and the distribution of the metal particles in the composite material.     

Formation of palladium nanoparticles in poly (o-methoxyaniline) macromolecule fibers: An in-situ chemical synthesis method

We report here a novel in-situ synthetic method for the preparation of poly (o-methoxyaniline) and palladium nanoparticle composite material. Ortho-Methoxyaniline and palladium acetate were used as the precursors; during the reaction o-methoxyaniline was oxidized and forms poly (o-methoxyaniline) and palladium acetate is reduced forming palladium nanoparticles. IR and Raman spectra provide information on the structure of the polymer. The TEM and SEM analysis are used to determine the size of the nanoparticles and the morphology of the polymer respectively.     

Effect of time dependent morphological parameters of nanoclusters on perikinetic heat conduction and induced micro-convection mechanisms of oxide based nanofluids

The article represents an experimentally supported quantitative analysis to observe the effect of time, temperature, nanoclusters’ morphology, and instantaneous volume fractions on perikinetic heat conduction and Brownian motion-based induced convection mechanisms of oxide (Al₂O₃ and TiO₂, size 25–30 nm) based nanofluids. The appropriate models of thermal conductivity have been introduced to study the effect of various parameters such as; varying volume fractions, suspensions’ stabilities, nanoclusters’ growth, temperature, and the liquid layering. The developed model could predict the thermal conductivity enhancements of nanofluids within the accuracy of ± 0.5% to ± 4.5.0% in the temperature range from 20°C to 50°C.

Abbreviations: DI: De-ionized water; DLS: Dynamic light scattering; XRD: X-rays diffraction; TEM: Transmission electronic microscope; SDBS:Sodium dodecyl benzene sulphonate.

Figure Effect of temperature on the Brownian Reynold number for Al₂O₃-H₂O and TiO₂-H₂O nanofluids.     

Bidirectional carrier aggregation in next-generation radio-over-fiber heterogeneous network based on FBMC

We have projected and verified a bidirectional intra-/inter-radio-access-technology carrier-aggregation method for a next-generation heterogeneous mobile network supported by filter bank multicarrier(FBMC). Successful transmission of intra/inter-band carrier aggregation between five broadband FBMC signals and three bands 4G long-term-evolution-advanced signal over 50 km single-mode fiber plus 10 m free-space is successfully broadcasted by employing an incoherent light-injection scheme in downlink. In uplink, two intra-bands carrier-aggregated wireless local area network Institute of Electrical and Electronics Engineers 802.11 g signal is carried over the equal distance. High receiver sensitivity, low error vector magnitude, and clear constellation diagrams show successful delivery of different wireless services for different consumers. Therefore, the proposed hybrid system should become a potential solution for a future mobile front-haul network because of its low latency and high capacity.