A new tetrathiafulvalene–diamide cation salt with [Cu2Br4]2− anions

The title salt, bis[2,3‐bis(aminocarbonyl)‐8,9‐bis(methylsulfanyl)tetrathiafulvalenium] di‐μ‐bromido‐bis[bromidocopper(II)], (C₁₀H₁₀N₂O₂S₆)₂[Cu₂Br₄], contains 2,3‐bis(aminocarbonyl)‐8,9‐bis(methylsulfanyl)tetrathiafulvalenium radical cations, [DMT‐TTF(CONH₂)₂]^·+, and [Cu₂Br₄]²⁻ anions. The cations are associated across centres of inversion in a head‐to‐tail fashion via short face‐to‐face S...S stacking (TTF moiety). These dimers are further assembled into a one‐dimensional chain structure via interdimer double S...S contacts involving the methylsulfanyl groups. The one‐dimensional chains give rise to a two‐dimensional structure through intermolecular double N—H...O hydrogen bonds involving the amide group. The [Cu₂Br₄]²⁻ anions, which straddle centres of inversion, are located between the cation layers. Electron paramagnetic resonance measurements show a radical signal, indicating that the two TTF^·+ radicals are not completely coupled in the dimer.     

Diaquabis(2,5‐dihydroxybenzoato‐κO)bis(1,10‐phenanthroline‐κ2N,N′)strontium(II) bis(1,10‐phenanthroline) tetrahydrate

The title compound, [Sr(C₇H₅O₄)₂(C₁₂H₈N₂)₂(H₂O)₂]·2C₁₂H₈N₂·4H₂O, consists of an Sr^II complex, uncoordinated phenanthroline (phen) molecules and solvent water molecules. The Sr^II ion is located on a twofold axis and is coordinated by two phen ligands, two dihydroxybenzoate anions and two water molecules in a distorted tetragonal antiprismatic geometry. Partially overlapped arrangements exist between parallel coordinated and parallel uncoordinated phen rings; the face‐to‐face separations between the former (coordinated) and the latter (uncoordinated) rings are 3.436 (13) and 3.550 (14) Å, respectively. This difference suggests the effect of metal coordination on π–π stacking between phen rings.     

L-脯氨酸催化下甲基酮和1-芳基-2,2,2-三氟乙酮的不对称Aldol反应

Direct asymmetric aldol addition of methyl ketones to 2,2,2-trifluoro-1-phenylethanone and its ring-substituted derivatives was achieved using L-proline as a chiral promoter. Various optically active β-trifluoromethyl-β-hydroxy ketones were obtained in almost quantitative yields with moderate enantioselectivities up to 64 % ee.     

Efficient synthesis in three steps and spectral determination of methyl‐5‐[(o‐, m‐, and p‐substituted‐phenylthio]‐2‐benzimidazolecarbamates

The preparation and spectral properties often novel methyl 5‐[(o‐, m‐, and p‐substituted)‐phenylthio]‐2‐benzimidazolecarbamates with possible pharmacological activity as antihelmintics is described; by condensation and cyclization between 5‐methylthioures sulfate chloroformic acid methyl ester and 3,4‐diaminophenyl‐substituted‐phenylthio ether dissolved in ethanol. The structures of all final products were corroborated by ir; ¹H‐nmr, ¹³C‐nmr and ms.     

A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.     

Energy Dissipation Processes of singlet‐excited 1‐Hydroxyfluorenone and its Hydrogen‐bonded Complex with N‐methylimidazole¶

Effects of solvent, pH and hydrogen bonding with N‐methylimidazole (MIm) on the photophysical properties of 1‐hydroxyfluorenone (1HOF) have been studied. Fluorescence lifetime, fluorescence quantum yield and triplet yield measurements demonstrated that intersystem crossing was the dominant process in apolar media and its rate constant significantly diminished with increasing solvent polarity. The acceleration of internal conversion in alcohols paralleled the strength of intermolecular hydrogen bonding. The faster energy dissipation from the singlet‐excited state in cyclohexane was attributed to intramolecular hydrogen bonding. The pK_a of 1HOF decreased from 10.06 to 5.0 on light absorption, and H₃O⁺ quenched the singletexcited molecules in a practically diffusion‐controlled reaction. On addition of MIm in toluene, dual fluorescence was observed, which was attributed to reversible formation of excited hydrogen‐bonded ion pair. Rate constants for the various deactivation pathways were derived from the combined analysis of the steady‐state and the time‐resolved fluorescence results.     

Effects of hydrogen bonding on metal ion-promoted intramolecular electron transfer and photoinduced electron transfer in a ferrocene-quinone dyad with a rigid amide spacer

A ferrocene-quinone dyad (Fc-Q) with a rigid amide spacer and Fc-(Me)Q dyad, in which the amide proton acting as a hydrogen-bonding acceptor is replaced by the methyl group, are employed to examine the effects of hydrogen bonding on both the thermal and the photoinduced electron-transfer reactions. The hydrogen bonding of the semiquinone radical anion with the amide proton in Fc-Q(.-) produced by the electron-transfer reduction of Fc-Q is indicated by the significant positive shift of the one-electron reduction potential of Fc-Q. The hyperfine coupling constants of Fc-Q(.-) also indicate the existence of hydrogen bonding, agreeing with those predicted by the density functional calculation. The hydrogen-bonding dynamics in the photoinduced electron transfer from the ferrocene (Fc) to the quinone moiety (Q) in Fc-Q have been successfully detected in the femtosecond laser flash photolysis experiments. Thermal intramolecular electron transfer from Fc to Q in Fc-Q and Fc-(Me)Q also occurs efficiently in the presence of metal ions in acetonitrile at 298 K. The hydrogen bond formed between the semiquinone radical anion and the amide proton in Fc-Q results in remarkable acceleration of the rate of metal ion-promoted electron transfer as compared to the rate of Fc-(Me)Q in which hydrogen bonding is prohibited. The metal ion-promoted electron-transfer rates are well correlated with the binding energies of superoxide ion-metal ion complexes, which are derived from the g(zz) values of the ESR spectra.     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Synthesis and in vitro degradation of poly(N‐vinyl‐2‐pyrrolidone)‐based graft copolymers for biomedical applications

This work is devoted to the design of a novel family of hydrosoluble biomaterials: poly(N‐vinyl‐2‐pyrrolidone) (PVP)‐based graft copolymers. A synthesis route has been elaborated in which ω‐functionalized PVP is prepared via chain‐transfer radical polymerization, end‐group modified, and subsequently grafted onto a polyhydroxylated backbone, typically dextran or poly(vinyl alcohol). The resulting graft copolymer biomaterials are designed for use in various biomedical applications, particularly as materials with a stronger potential for plasma expansion than already existing products have. The graft copolymers are potentially degradable because the PVP grafts are connected to the polyol backbone via a hydrolytically labile carbonate or ester linkage. The degradation of the graft copolymers was performed in vitro over a period of 6 weeks. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3652–3661, 2002     

Synthesis and properties of amine‐containing poly(arylene ether sulfone) as an anion‐exchange matrix

Poly(arylene ether sulfone) (PSF), showing good thermal stability and excellent mechanical properties, was synthesized as an anion‐exchange matrix. It was synthesized by the condensation polymerization between bisphenol A and 4,4′‐dichlorodiphenylsulfone. 1°‐Amine‐containing poly(arylene ether sulfone) (1°‐APSF) was synthesized by the reduction reaction of a nitrated PSF. Then, it was transferred to 3°‐amine‐containing poly(arylene ether sulfone) (3°‐APSF) by the alkylation of the amine of 1°‐APSF. The properties of PSF, 1°‐APSF, and 3°‐APSF were investigated by Fourier transform infrared, ¹H NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The introduction of the 3°‐amine group into PSF increased the glass‐transition temperature but decreased thermooxidative stability. The ion‐exchange capacities of 1°‐APSF and 3°‐APSF were shown to be 2.24 and 2.86 mequiv/g, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4281–4287, 2002