Capacity factors and peak widths in the gradient elution reversed phase separation of high molar mass polystyrenes

Summary A simplex method for determining the constantsS andk _o from the equation lnk’=lnk _o−S ϕ (was developed and applied to the reversed phase separation of high molar mass polystyrenes using gradients of any curvature. Experimental retention times described using the equation had a standard deviation of 1.1%. The inclusion of a quadratic term in the equation was found to be unwarranted. BothS and lnk _o varied linearly with ln molar mass. The logarithm of peak width of an eluting polystyrene peak was found to be a linear function of the mobile phase composition at elution. The slope was equal toS.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

Ar原子电离能谱和Ar3p电子动量谱研究

电子动量谱学（ElectronMomentumSPectroscoP则是近．二十年来发展起来的一种新兴的探测原子、分子和固体结构的手段，它不仅能够获得轨道结合能的信息，而且能够能壳分辨地得到轨道电子的动量分布（即动量表象中的波函数模方）；同时它还是研究电子关联的最有效的实验手段．其     

Chain-transfer constant of fluoroalcohols

Chain transfer constants of some fluoroalcohols [HCF₂(CF₂)_n?1CH₂OH, n = 2, 4, 6] in the catalyzed polymerization of vinyl acetate, styrene, acrylonitrile, and methyl methacrylate at 60°C have been evaluated by a method based on degree of polymerization. Since fluoroalcohols are normally nonsolvents for polymers, a homogeneous reaction phase is maintained by carrying out the polymerization in benzene (except in case of acrylonitrile, where no solvent was used). The transfer constants vary, depending on the reactivity as well as the polarity of the radicals, in the following order: vinyl acetate > styrene > methyl methacrylate > acrylonitrile. Of the three fluoroalcohols studied, the transfer constants increase with the increasing value of n. The results have been interpreted in terms of polar structure contribution in the transition state of the transfer reactions.     

二道沟金矿床中的稀土元素地球化学特征

通过对未蚀变流纹岩，蚀变流纹岩和金矿石中稀土元素组成及分布模式的研究，表明岩浆热液与以大气降水为来源的地下水相混合后形成的成矿热液中稀土元素具有富集ＬＲＥ、稀土元素总量低以及Ｅｕ具有明显负异常的特征。     

Comparative resin kinetics using in situ fluorescence measurements

The aminolysis of a novel activated ester resin was utilized for kinetic study via continuous in situ fluorescence measurements. A variety of resin compositions (polystyrene, JandaJel, ArgoPore, TentaGel, NovaGel, and PEGA) and solvents (dimethylformamide, acetonitrile, tetrahydrofuran, 1,2-dichlorethane, and toluene) were tested to compare their effects on the reaction rate. A linear relationship between the reaction rate and (solvent polarity x swelling of resin) was elucidated for the aminolysis reaction.     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

薄层色谱-紫外可见分光光度法同时测定食品中的苏丹红Ⅰ～Ⅳ

建立了测定食品中苏丹红色素含量的新方法——薄层色谱-紫外可见分光光度法,对影响测定的因素如样品预处理方式、展开剂等进行了讨论,检测苏丹红Ⅰ~Ⅳ的线性范围分别为0.5~14μg/mL,0.5~10μg/mL,0.5~15μg/mL,0.5~15μg/mL,线性相关系数均为0.999,检出限均为0.05μg/mL。该方法测定结果与国家标准方法测定结果基本一致。     

Impact of prefractionation using Gradiflow on two-dimensional gel electrophoresis and protein identification by matrix assisted laser desorption/ionization-time of flight-mass spectrometry

Prefractionation of protein samples prior to two-dimensional electrophoresis (2-DE) has the potential to increase the dynamic detection range for proteomic analysis. We evaluated a membrane-based electrophoretic separation technique (Gradiflow) for its ability to fractionate an exoproteome sample from the filamentous fungus Trichoderma reesei. The sample was separated on the basis of size and charge. Buffer optimization was found to be necessary for successful size fractionation. Fractionation by charge was used to resolve the sample into four fractions that were subjected to analysis by two-dimensional electrophoresis (2-DE). Enhanced detection of low-abundance proteins with selective removal of high-abundance species was achieved. Fractionated and unfractionated samples were examined for differences in the ability to identify proteins following 2-DE using trypsin in-gel digestion followed by peptide mass fingerprinting using matrix assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). Fractionated samples showed marked improvement in protein identification ability and sequence coverage. This study demonstrates the utility of the Gradiflow for fractionation, resulting in an enhancement of resolution and characterization of a moderately complex proteome.     

Effect of electrode membrane surface ratio and thickness on lead electrode potential

Summary The lead ion selective electrode (ISE) consisting of PbS-Ag₂S is normally used with a membrane surface of outer layer areaA _o) and inner layer area (A _i) at unity (A _o=A _i). Partial covering of one surface area with an insulating material and keeping the other surface layer intact resulted in different ratios of membrane surface areas exposed to lead solutions. The potential linearly increased with increasing theA _o/A _i ratio and decreased with decreasing theA _o/A _i ratio. The lead ISE potential increased linearly with increasing the membrane thickness, but which required much longer time for a stable potential.

---

Wirkung von Oberflächenverhältnis und Dicke der Elektrodenmembran auf das Potential einer Bleielektrode

Zusammenfassung Die aus PbS-Ag₂S bestehende spezifische Bleiionen-Elektrode wird üblicherweise mit einem Oberflächenverhältnis der Außenfläche (A _o) und der Innenfläche (A _i) mitA _o=A _i verwendet. Durch teilweise Abdeckung einer Oberfläche mit isolierendem Material, ohne daß die andere Oberfläche verändert wird, ergaben sich verschiedene Verhältnisse der mit der Bleilösung in Berührung stehenden Oberflächen. Mit dem VerhältnisA _o/A _i stieg das Potential linear an bzw. es fiel mit diesem Verhältnis ab. Das Potential der spezifischen Bleielektrode stieg mit der Dicke der Membran, stabilisierte sich aber wesentlich langsamer.