Evaluation of the DNA Alkylation Properties of a Chlorambucil-Conjugated Cyclic Pyrrole-Imidazole Polyamide

Hairpin pyrrole-imidazole polyamides (hPIPs) and their chlorambucil (Chb) conjugates (hPIP-Chbs) can alkylate DNA in a sequence-specific manner, and have been studied as anticancer drugs. Here, we conjugated Chb to a cyclic PIP (cPIP), which is known to have a higher binding affinity than the corresponding hPIP, and investigated the DNA alkylation properties of the resulting cPIP-Chb using the optimized capillary electrophoresis method and conventional HPLC product analysis. cPIP-Chb conjugate 3 showed higher alkylation activity at its binding sites than did hPIP-Chb conjugates 1 and 2 . Subsequent HPLC analysis revealed that the alkylation site of conjugate 3 , which was identified by capillary electrophoresis, was reliable and that conjugate 3 alkylates the N3 position of adenine as do hPIP-Chbs. Moreover, conjugate 3 showed higher cytotoxicity against LNCaP prostate cancer cells than did conjugate 1 and cytotoxicity comparable to that of conjugate 2 . These results suggest that cPIP-Chbs could be novel DNA alkylating anticancer drugs.     

Electrophilic glycosidation employing 3,5-O-(di-tert-butylsilylene)-erythro-furanoid glycal leads to exclusive formation of the β-anomer: synthesis of 2′-deoxynucleosides and its 1′-branched analogues

Stereoselectivity in N-iodosuccimide (NIS)-mediated electrophilic glycosidation was examined by employing 2,4-bis-O-(trimethylsilyl)thymine and three different silyl-protected erythro-furanoid glycals 12, 16, and 18. As a result, it was found that 3,5-O-(di-t-butylsilylene)-protected 18 gave only the β-anomer (21). The remarkable stereoselectivity observed by employing 18 is discussed on the basis of its X-ray crystallographic analysis. 1-Substituted glycals gave the corresponding β-anomer, again exclusively, to provide access to 1′-branched 2′-deoxynucleosides.     

Submillimeter-wave and far-infrared spectroscopy of high-J transitions of the ground and ν2 = 1 states of ammonia

Complete and reliable knowledge of the ammonia spectrum is needed to enable the analysis and interpretation of astrophysical and planetary observations. Ammonia has been observed in the interstellar medium up to J=18 and more highly excited transitions are expected to appear in hot exoplanets and brown dwarfs. As a result, there is considerable interest in observing and assigning the high J (rovibrational) spectrum. In this work, numerous spectroscopic techniques were employed to study its high J transitions in the ground and ν(2)=1 states. Measurements were carried out using a frequency multiplied submillimeter spectrometer at Jet Propulsion Laboratory (JPL), a tunable far-infrared spectrometer at University of Toyama, and a high-resolution Bruker IFS 125 Fourier transform spectrometer (FTS) at Synchrotron SOLEIL. Highly excited ammonia was created with a radiofrequency discharge and a dc discharge, which allowed assignments of transitions with J up to 35. One hundred and seventy seven ground state and ν(2)=1 inversion transitions were observed with microwave accuracy in the 0.3-4.7 THz region. Of these, 125 were observed for the first time, including 26 ΔK=3 transitions. Over 2000 far-infrared transitions were assigned to the ground state and ν(2)=1 inversion bands as well as the ν(2) fundamental band. Of these, 1912 were assigned using the FTS data for the first time, including 222 ΔK=3 transitions. The accuracy of these measurements has been estimated to be 0.0003-0.0006?cm(-1). A reduced root mean square error of 0.9 was obtained for a global fit of the ground and ν(2)=1 states, which includes the lines assigned in this work and all previously available microwave, terahertz, far-infrared, and mid-infrared data. The new measurements and predictions reported here will support the analyses of astronomical observations by high-resolution spectroscopy telescopes such as Herschel, SOFIA, and ALMA. The comprehensive experimental rovibrational energy levels reported here will permit further refinement of the potential energy surface to improve ammonia ab initio calculations and facilitate assignment of new high-resolution spectra of hot ammonia.     

The effect of specific surface area of TiO<Subscript>2</Subscript> on the thermal decomposition of ammonium perchlorate

The thermal decomposition of ammonium perchlorate (AP) is considered to be the first step in the combustion of AP-based composite propellants. In this report, the effect of the specific surface area of titanium oxide (TiO₂) catalysts on the thermal decomposition characteristics of AP was examined with a series of thermal analysis experiments. It was clear that the thermal decomposition temperature of AP decreased when the specific surface area of TiO₂ increased. It was also possible that TiO₂ influences the frequency factor of AP decomposition because there was no observable effect on the activation energy.     

Analysis of the pure-rotational spectrum in the ν28 = 1 excited torsional state and torsional couplings of trans-ethyl methyl ether

The trans-ethyl methyl ether molecule has three low-lying torsional modes, that is, two inequivalent methyl internal rotations and an asymmetric skeletal torsion. The internal rotations of the CCH₃ and OCH₃ methyl rotors and the skeletal torsion correspond to the vibrational modes, ν₂₈, ν₂₉ and ν₃₀ respectively. In this study, the microwave absorption spectrum in the ν₂₈ = 1 CCH₃ torsional state was analyzed for the first time. Nine hundred fifty seven lines up to J = 48 and K = 4 were assigned, and the rotational, centrifugal distortion and internal rotational tunneling parameters were determined with the use of a tunneling matrix formalism. By combining the present results on the ν₂₈ = 1 torsional state with those for the ν₃₀ = 1 skeletal torsional state and the ν₂₉ = 1 OCH₃ torsional state, torsional couplings are estimated in order to understand quantitatively the inverted A/E sequence patterns observed for those three excited torsional states.     

Synthesis and properties of high‐molecular‐weight stereo di‐block polylactides with nonequivalent D/L ratios

Di‐stereoblock polylactides (di‐sb‐PLA: PLLA‐b‐PDLA) having high molecular weight (M_n > 100 kDa) were successfully synthesized by two‐step ring‐opening polymerization (ROP) of L ‐ and D ‐lactides using tin(2‐ethylhexanoate) as a catalyst. By optimizing the polymerization conditions, the block sequences were well regulated at non‐equivalent feed ratios of PLLA and PDLA. This synthetic method consisted of three stages: (1) polymerization of either L ‐ or D ‐lactide to obtain a PLLA or PDLA prepolymer with a molecular weight less than 50 kDa, (2) purification of the obtained prepolymer to remove residual lactide, and (3) polymerization of the enantiomeric lactide in the presence of the purified prepolymer. Their ¹³C and ³¹P NMR spectra of the resultant di‐sb‐PLAs strongly supported their di‐stereo block structure. These di‐sb‐PLAs, having weight‐average molecular weights higher than 150 kDa, were fabricated into polymer films by solution casting and showed exclusive stereocomplexation. The thermomechanical analysis of the films revealed that their heat deformation temperature was limited probably because of their low crystallinity owing to the non‐equivalent PLLA/PDLA ratio. The blend systems of the di‐sb‐PLAs having complementary stereo‐sequences (the one with a long PLLA block and the other with long PDLA block) were also prepared and characterized to enhance the sc crystallinity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 794–801, 2010     

Bisbenzylisoquinoline Alkaloids from Nelumbo nucifera

From the embryos of the seeds of Nelumbo nucifera, three bisbenzylisoquinoline alkaloids, nelumboferine and nelumborines A and B, were isolated along with four known compounds, neferine, liensinine, isoliensinine and anisic acid. The structures of the new alkaloids were determined mainly by spectroscopic methods.     

Thermogravimetry of the products in an imbalance condensation of an aromatic diamine and dichloride

Imbalance condensation of diaminophenylbenzimidazole, DAPBI, with terephthaloyl chloride, TPC was conducted for the purpose of synthesis of macromonomers, expected to be used in syntheses of aromatic polyamides with structural regularities. The products are soluble in dimethylsulfoxide—d6, and their 1H NMR spectra indicate that all the products are carboxyl-terminated. The signal of carboxyphenyl linked to chain ends is different from that of terephthaloyl in the 1H NMR spectra. By use of the ratio of the signal intensity of the former to that of the latter, the number-average degree of polymerization, DP _NMR is determined. With the mole ratio in feed, DP _NMR of the product increases. The TG thermograms of the products are a multistage one. Each stage is classified by temperature and mass loss at an inflection point. Mass loss of each stage classified by temperature at an inflection point corresponds to mass fraction of an aromatic amide with a characteristic degree of polymerization, DP, and that is, the DP distribution of the products is roughly estimated from the TG thermograms. The DP distribution of macromonomers influences performance of aromatic polyamides with structural regularities, derived from the macromonomers. The convenient estimation method of DP distribution by TG is useful in industries of high-performance polymers. To the knowledge, such convenient technique has never reported.