Preparation and characterization of C16 monolithic columns for capillary electrochromatography

A series of methacrylamide-based C16 monolithic columns were prepared and characterized to determine how their porous structural properties and chromatographic behavior are affected by the percentages of functional monomer, base monomer, and cross-linker in the polymerization solution. Baseline separation of 6 neutral compounds can be readily obtained in an optimized column. Furthermore, the effects of organic additive in the mobile phase, operating voltages, and temperature on retention behaviors and separation efficiencies were also studied. The separation mechanism is also discussed. High column efficiency and good reproducibility indicate that the monolithic columns hold considerable promise.     

Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

纳米二氧化钛分离/富集-石墨原子吸收光谱法测定环境样品中痕量镉

以石墨炉原子吸收(GFAAS)为检测手段,研究了纳米二氧化钛(TiO2,锐钛型)对金属Cd(Ⅱ)的吸附性能,考察了吸附和解吸的主要影响因素.结果表明,在较宽的pH范围内,纳米TiO2对Cd(Ⅱ)具有良好的吸附性能,3.0 mol/L HCl能将所吸附的Cd(Ⅱ)完全洗脱.在优化的实验条件下,具有吸附容量大、吸附速度快的特点.本法的检出限(3σ)为10.6 ng/L;相对标准偏差(RSD)为1.5%,(n=7,C=2.0 μg/L),富集50倍.本法测定标准样品的测定值与参考值吻合.用于土壤类样品中Cd(Ⅱ)的测定,结果令人满意.     

超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

二(β-二酮)氧钒(Ⅳ)与含氮碱加合物的合成和表征

合成了一系列VO(β-dik)_2L类型加合物,其中β-dik分别为苯甲酰丙酮,2-噻吩甲酰三氟丙酮,L3-甲基吡啶、4-甲基吡啶、吗啉、异喹啉,VO(bza)_2Mor、VO(tta)_2Mor、VO(tta)_2iso-q为首次合成,并通过元素分析、摩尔电导、红外光谱、电子光谱、顺磁共振波谱等对加合物进行了较系统的表征工作。     

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

Hydroxylation of nigranoic acid to 6β-hydroxynigranoic acid by Caryospora carllicarpa YMF1.01026

Microbial transformation of nigranoic acid by Caryospora carllicarpa YMF1.01026 afforded the new derivative 6β-hydro-xynigranoic acid. Its structure was elucidated by spectroscopic methods.     

一种具有二维状组装体结构的氢键结合超分子水凝胶的制备

近年来,基于低分子量有机凝胶因子(low molecular mass organic gelators)[1]形成的超分子水凝胶得到了广泛关注.     

Circularly Polarized Absorption Property of Tetra-4[4''''-(2-methylbutoxy)benzoyloxy]phenyl Porphyrin by Introducing Optical Pendant Groups

Circularly polarized luminescent(CPL) materials possess special dissymmetric optical property, i.e. luminescent light having different intensities for left (L) and right(R) circularly polarized components. Recently, these materials have been applied in colour-image projection, stereoscopic displays and light-emitting diodes(LEDS)1-7. We have synthesized a new porphyrin derivative, tetra-4[4'-(2-methylbutoxy)benzoyloxy] phenyl porphyrin [T(MBBP)P], by introducing a chiral group, which p…