Phytohormone Supplementation Significantly Increases Growth of Chlamydomonas reinhardtii Cultivated for Biodiesel Production

Cultivation is the most expensive step in the production of biodiesel from microalgae, and substantial research has been devoted to developing more cost-effective cultivation methods. Plant hormones (phytohormones) are chemical messengers that regulate various aspects of growth and development and are typically active at very low concentrations. In this study, we investigated the effect of different phytohormones on microalgal growth and biodiesel production in Chlamydomonas reinhardtii and their potential to lower the overall cost of commercial biofuel production. The results indicated that all five of the tested phytohormones (indole-3-acetic acid, gibberellic acid, kinetin, 1-triacontanol, and abscisic acid) promoted microalgal growth. In particular, hormone treatment increased biomass production by 54 to 69 % relative to the control growth medium (Tris–acetate–phosphate, TAP). Phytohormone treatments also affected microalgal cell morphology but had no effect on the yields of fatty acid methyl esters (FAMEs) as a percent of biomass. We also tested the effect of these phytohormones on microalgal growth in nitrogen-limited media by supplementation in the early stationary phase. Maximum cell densities after addition of phytohormones were higher than in TAP medium, even when the nitrogen source was reduced to 40 % of that in TAP medium. Taken together, our results indicate that phytohormones significantly increased microalgal growth, particularly in nitrogen-limited media, and have potential for use in the development of efficient microalgal cultivation for biofuel production.     

[CpIrCl2]2-catalysed cyclization of 2-alkynylanilines into indoles

[Cp^∗IrCl₂]₂ catalyses the cyclization of 2-alkynylanilines into indoles. A wide variety of substrates is tolerated. A reaction pathway involving intramolecular hydroamination is proposed.     

Migration of indium ions in amorphous indium-gallium-zinc-oxide thin film transistors

Electromigration of In in amorphous indium-gallium-zinc-oxide thin film transistors under repeated switching operation was investigated by analyzing the distribution of component elements. During the repeated switching operations up to 300 times, threshold voltage of this device increased gradually implying alteration to the internal device structures. Energy dispersive X-ray spectroscopy revealed noticeable redistribution of metallic components, especially In, in the channel layer beneath the source electrode during switching operations by the migration of metallic ions away from the source electrode, which is attributed to electromigrations similar to those observed in organic light emitting diodes having indium tin oxide electrodes.     

An Ultra-Microporous Metal–Organic Framework with Exceptional Xe Capacity

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal–organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni–MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO₂. Further ¹²⁹Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.     

Three‐Component Self‐Assembly of a Series of Triply Interlocked Pd12 Coordination Prisms and Their Non‐Interlocked Pd6 Analogues

Template‐assisted formation of multicomponent Pd₆ coordination prisms and formation of their self‐templated triply interlocked Pd₁₂ analogues in the absence of an external template have been established in a single step through Pd? N/Pd? O coordination. Treatment of cis‐[Pd(en)(NO₃)₂] with K₃tma and linear pillar 4,4′‐bpy (en=ethylenediamine, H₃tma=benzene‐1,3,5‐tricarboxylic acid, 4,4′‐bpy=4,4′‐bipyridine) gave intercalated coordination cage [{Pd(en)}₆(bpy)₃(tma)₂]₂[NO₃]₁₂ ( 1 ) exclusively, whereas the same reaction in the presence of H₃tma as an aromatic guest gave a H₃tma‐encapsulating non‐interlocked discrete Pd₆ molecular prism [{Pd(en)}₆(bpy)₃(tma)₂(H₃tma)₂][NO₃]₆ ( 2 ). Though the same reaction using cis‐[Pd(NO₃)₂(pn)] (pn=propane‐1,2‐diamine) instead of cis‐[Pd(en)(NO₃)₂] gave triply interlocked coordination cage [{Pd(pn)}₆(bpy)₃(tma)₂]₂[NO₃]₁₂ ( 3 ) along with non‐interlocked Pd₆ analogue [{Pd(pn)}₆(bpy)₃(tma)₂](NO₃)₆ ( 3′ ), and the presence of H₃tma as a guest gave H₃tma‐encapsulating molecular prism [{Pd(pn)}₆(bpy)₃(tma)₂(H₃tma)₂][NO₃]₆ ( 4 ) exclusively. In solution, the amount of 3′ decreases as the temperature is decreased, and in the solid state 3 is the sole product. Notably, an analogous reaction using the relatively short pillar pz (pz=pyrazine) instead of 4,4′‐bpy gave triply interlocked coordination cage [{Pd(pn)}₆(pz)₃(tma)₂]₂[NO₃]₁₂ ( 5 ) as the single product. Interestingly, the same reaction using slightly more bulky cis‐[Pd(NO₃)₂(tmen)] (tmen=N,N,N′,N′‐tetramethylethylene diamine) instead of cis‐[Pd(NO₃)₂(pn)] gave non‐interlocked [{Pd(tmen)}₆(pz)₃(tma)₂][NO₃]₆ ( 6 ) exclusively. Complexes 1 , 3 , and 5 represent the first examples of template‐free triply interlocked molecular prisms obtained through multicomponent self‐assembly. Formation of the complexes was supported by IR and multinuclear NMR (¹H and ¹³C) spectroscopy. Formation of guest‐encapsulating complexes ( 2 and 4 ) was confirmed by 2D DOSY and ROESY NMR spectroscopic analyses, whereas for complexes 1 , 3 , 5 , and 6 single‐crystal X‐ray diffraction techniques unambiguously confirmed their formation. The gross geometries of H₃tma‐encapsulating complexes 2 and 4 were obtained by universal force field (UFF) simulations.     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436     

Electroreduction of oxygen on Pd catalysts supported on Ti-modified carbon

Carbon supports modified with well dispersed anatase TiO₂ (C–Ti-X; X (0.25, 0.5, 0.75, and 1.0) represents mass ratio of Ti precursor to carbon) were synthesized with various Ti loadings and used to support Pd catalysts for oxygen reduction. The anatase nanoparticles increased in size with increasing Ti loading. Pd dispersion improved with increasing Ti loading up to the C–Ti-0.75, which resulted in the best catalytic activity. Although the Pd dispersion was lowest on the C–Ti-1.0, it showed better catalytic performance than the catalysts supported on C–Ti-0.25 and C–Ti-0.5. At 0.8 V (vs. RHE), the best catalytic activity achieved was respectively 2.7 and 2.7 times the mass and specific activities of Pd supported on un-modified carbon. The interaction between Pd and highly dispersed TiO₂ is believed to improve the catalytic activity of Pd supported on TiO₂-modified carbons.