Misalignment tolerance analysis and fabrication for highly efficient parallel optical-electrical convertor module

A compact, highly efficient, and passively assembled parallel optical-electrical convertor module (POECM) for active optical cable application is proposed. This paper presents our POECM structure, optical design simulation results, fabrication process, and data transmission test results, in sequence. The POECM has a compact size of \(18.5\hbox {mm} \times 10\hbox {mm} \times 2.8\hbox {mm}\) . We confirm a data rate of total throughput at 21.6 Gbps ( \(5.4\hbox {Gbps} \times 4\) channels) with a bit error rate of less than \(10^{-12}\) .     

New device architecture of a thermoelectric energy conversion for recovering low-quality heat

Low-quality heat is generally discarded for economic reasons; a low-cost energy conversion device considering price per watt, $/W, is required to recover this waste heat. Thin-film based thermoelectric devices could be a superior alternative for this purpose, based on their low material consumption; however, power generated in conventional thermoelectric device architecture is negligible due to the small temperature drop across the thin film. To overcome this challenge, we propose new device architecture, and demonstrate approximately 60 Kelvin temperature differences using a thick polymer nanocomposite. The temperature differences were achieved by separating the thermal path from the electrical path; whereas in conventional device architecture, both electrical charges and thermal energy share same path. We also applied this device to harvest body heat and confirmed its usability as an energy conversion device for recovering low-quality heat.     

Bilaminar pattern of tibial condyle cartilage layer on the fat-suppressed 3D gradient echo images: artifact or structural and biochemical difference in composition of cartilage?

The purpose of this study was to examine if an unusual bilaminar pattern of lateral tibial condyle cartilage layer on the fat-suppressed three-dimensional (3D) spoiled gradient echo sequence is artifactual or correlates with structural and/or biochemical composition of cartilage. The laminar appearance of the lateral tibial condyle cartilage layer was studied on fat-suppressed 3D spoiled gradient echo MR images of the knee joint in 67 patients (mean age: 28y) performed at 1.0 Tesla. After i.v. administration of gadopentetate dimeglumine, diffusion of the contrast media into cartilage layer was qualitatively analysed over time on inversion recovery spin echo images of knee joints of five asymptomatic volunteers (mean age: 25y). In a patient with osteosarcoma and total knee replacement, MR examination of cartilage layer of lateral tibial plateau was compared with histologic specimens stained with Safranin-O, demonstrating proteoglycan distribution in cartilage. The retrospective analysis of 67 knee joints revealed a bilaminar appearance of lateral tibial condyle cartilage layer in the gradient echo images in the majority of cases (81%) with a statistically significant tendency to a trilaminar pattern in patients older than 20 years. With i.v. contrast administration, the contrast enhancement was only observed in the superficial zone of tibial cartilage layer. Histologic specimens in one patient demonstrated a good correlation between thickness of proteoglycan-free and proteoglycan-rich laminae of lateral tibial condyle on Safranin-O staining with hyperintense and hypointense zones, respectively, on corresponding fat-suppressed 3D spoiled gradient echo images (correlation coefficient of 0.87). Bilaminar pattern of tibial condyle cartilage layer on fat-suppressed 3D spoiled gradient echo images in younger subjects is not an artifact or an intrachondral lesion, but it may represent a regional difference in composition of extracellular cartilage matrix possibly produced by a highly-oriented collagen fiber structure associated with a high concentration of proteoglycans in the middle and deep portion of the cartilage layer.     

Reversible interpenetration in a metal-organic framework triggered by ligand removal and addition

Caging cages: Crystals of a metal-organic framework, MOF-123 [Zn(7) O(2) (NBD)(5) (DMF)(2) ] have a three-dimensional porous structure in which DMF ligands (see picture, pink) protrude into small channels. Removal of these ligands triggers the transformation of this MOF to the doubly interpenetrating form, MOF-246 [Zn(7) O(2) (NBD)(5) ]. Moreover, addition of DMF into MOF-246 triggers reverse transformation to give MOF-123. NBD=2-nitrobenzene-1,4-dicarboxylate.     

Synthesis and Characterization of Cationic Glycidyl-Based Poly(aminoester)-Folic Acid Targeting Conjugates and Study on Gene Delivery

A new poly(aminoester) (EPAE-FA) containing folic acid and amino groups in the backbone and side chain was synthesized. EPAE-FA self-assembled readily with the plasmid DNA (pCMV-βgal) in HEPES buffer and was characterized by dynamic light scattering, zeta potential, fluorescence images, and XTT cell viability assays. To evaluate the transfection effect of graft ratio of FA on the EPAE system, EPAE-FA polymers with two different graft ratios (EPAE-FA12k and EPAE-FA14k) were also prepared. This study found that all EPAE-FA polymers were able to bind plasmid DNA and yielded positively charged complexes with nano-sized particles ( < 200 nm). To assess the transfection efficiency mediated by EPAE and EPAE-FA polymers, we performed in vitro transfection activity assays using FR-negative (COS-7) and FR-positive (HeLa) cells. The EPAE-FA12k/DNA and EPAE-FA14k/DNA complexes were able to transfect HeLa cell in vitro with higher transfection efficiency than PEI25k/DNA at the similar weight ratio. These results demonstrated that the introduction of FA into EPAE system had a significant effect on transferring ability for FR-positive cells (HeLa). Examination of the cytotoxicity of PEI25k and EPAE-FA system revealed that EPAE-FA system had lower cytotoxicity. In this paper, EPAE-FA seemed to be a novel cationic poly(aminoester) for gene delivery and an interesting candidate for further study.     

Continuous operation of a hybrid solid-liquid state reconfigurable photonic system without resupply of liquids

Optofluidics offers a number of potentially transformative advantages for photonic systems. At present however there are a number of technological roadblocks that prevent the practical integration of liquid-state elements into traditional high-speed solid-state photonic systems. Two of the most important of these are the need for continuous resupply of liquids and the difficulty in shuttling light between the liquid- and solid-states. In this paper we present an integrated system that solves both these problems. For the first time we demonstrate direct evanescent and end-fire coupling between liquid- and solid-state waveguides and an on-chip fluid core/cladding separation and recirculation system that reduces the consumption of liquids more than 200 fold over the state of the art. The device is operated continuously for over 20 h without performance degradation or requiring the replenishment of liquids. We believe that our system represents an important step towards the development of practical optofluidically enabled photonic systems.     

Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid

Pure separation and sorting of microparticles from complex fluids are essential for biochemical analyses and clinical diagnostics. However, conventional techniques require highly complex and expensive labeling processes for high purity separation. In this study, we present a simple and label-free method for separating microparticles with high purity using the elasto-inertial characteristic of a non-Newtonian fluid in microchannel flow. At the inlet, particle-containing sample flow was pushed toward the side walls by introducing sheath fluid from the center inlet. Particles of 1 μm and 5 μm in diameter, which were suspended in viscoelastic fluid, were successfully separated in the outlet channels: larger particles were notably focused on the centerline of the channel at the outlet, while smaller particles continued flowing along the side walls with minimal lateral migration towards the centerline. The same technique was further applied to separate platelets from diluted whole blood. Through cytometric analysis, we obtained a purity of collected platelets of close to 99.9%. Conclusively, our microparticle separation technique using elasto-inertial forces in non-Newtonian fluid is an effective method for separating and collecting microparticles on the basis of size differences with high purity.     

Human gut-on-a-chip inhabited by microbial flora that experiences intestinal peristalsis-like motions and flow

Development of an in vitro living cell-based model of the intestine that mimics the mechanical, structural, absorptive, transport and pathophysiological properties of the human gut along with its crucial microbial symbionts could accelerate pharmaceutical development, and potentially replace animal testing. Here, we describe a biomimetic 'human gut-on-a-chip' microdevice composed of two microfluidic channels separated by a porous flexible membrane coated with extracellular matrix (ECM) and lined by human intestinal epithelial (Caco-2) cells that mimics the complex structure and physiology of living intestine. The gut microenvironment is recreated by flowing fluid at a low rate (30 μL h(-1)) producing low shear stress (0.02 dyne cm(-2)) over the microchannels, and by exerting cyclic strain (10%; 0.15 Hz) that mimics physiological peristaltic motions. Under these conditions, a columnar epithelium develops that polarizes rapidly, spontaneously grows into folds that recapitulate the structure of intestinal villi, and forms a high integrity barrier to small molecules that better mimics whole intestine than cells in cultured in static Transwell models. In addition, a normal intestinal microbe (Lactobacillus rhamnosus GG) can be successfully co-cultured for extended periods (>1 week) on the luminal surface of the cultured epithelium without compromising epithelial cell viability, and this actually improves barrier function as previously observed in humans. Thus, this gut-on-a-chip recapitulates multiple dynamic physical and functional features of human intestine that are critical for its function within a controlled microfluidic environment that is amenable for transport, absorption, and toxicity studies, and hence it should have great value for drug testing as well as development of novel intestinal disease models.     

Slab waveguide photobioreactors for microalgae based biofuel production

Microalgae are a promising feedstock for sustainable biofuel production. At present, however, there are a number of challenges that limit the economic viability of the process. Two of the major challenges are the non-uniform distribution of light in photobioreactors and the inefficiencies associated with traditional biomass processing. To address the latter limitation, a number of studies have demonstrated organisms that directly secrete fuels without requiring organism harvesting. In this paper, we demonstrate a novel optofluidic photobioreactor that can help address the light distribution challenge while being compatible with these chemical secreting organisms. Our approach is based on light delivery to surface bound photosynthetic organisms through the evanescent field of an optically excited slab waveguide. In addition to characterizing organism growth-rates in the system, we also show here, for the first time, that the photon usage efficiency of evanescent field illumination is comparable to the direct illumination used in traditional photobioreactors. We also show that the stackable nature of the slab waveguide approach could yield a 12-fold improvement in the volumetric productivity.     

Site- and enantioselective formation of allene-bearing tertiary or quaternary carbon stereogenic centers through NHC-Cu-catalyzed allylic substitution

Catalytic enantioselective allylic substitutions that result in addition of an allenyl group (<2% propargyl addition) and formation of tertiary or quaternary C-C bonds are described. Commercially available allenylboronic acid pinacol ester is used. Reactions are promoted by a 5.0-10 mol % loading of sulfonate-bearing chiral bidentate N-heterocyclic carbene (NHC) complexes of copper, which exhibit the unique ability to furnish chiral products arising from the S(N)2' mode of addition. Allenyl-containing products are generated in up to 95% yield, >98% S(N)2' selectivity, and 99:1 enantiomeric ratio (er). Site-selective NHC-Cu-catalyzed hydroboration of enantiomerically enriched allenes and conversion to the corresponding β-vinyl ketones demonstrates the method's utility.