Quantitative analysis of 23-hydroxybetulinic acid in mouse plasma using electrospray liquid chromatography/mass spectrometry

23-Hydroxybetulinic acid is a newly isolated derivative of betulinic acid. The agent exhibits potential anti-tumor activity and functions in this regard via apoptosis. In support of pharmacokinetic and toxicological evaluations, a new assay based on liquid chromatography/mass spectrometry (LC/MS) was developed for the quantitative analysis of 23-hydroxybetulinic acid. Sample preparation consisted of extraction of the plasma by the addition of methylene chloride followed by centrifugation. Aliquots of the supernatant were analyzed using an isocratic reversed-phase high-performance liquid chromatography (HPLC) system coupled to a negative ion electrospray mass spectrometer. Molecules of 23-hydroxybetulinic acid and the internal standard limonin were detected using selected ion monitoring at m/z 471 and 469, respectively. The limit of detection of 23-hydroxybetulinic acid was 0.05 pg (0.11 fmol) injected on-column (10 pg/mL, 5 microL injection volume), and the limit of quantitation was 10 pg (21.19 fmol, 2 ng/mL, 5 muL injection volume). 23-Hydroxybetulinic acid was stable in plasma samples at -20 degrees C for at least 3 weeks. The intra-day and inter-day coefficients of variation of the assay were 3.0 and 4.8%, respectively. The utility of the assay was demonstrated by measuring 23-hydroxybetulinicacid in mouse plasma following intragastric administration (IG) in vivo. Pharmacokinetic parameters were calculated using the 3P97 pharmacokinetic software package. A two-compartment, first-order model was selected for pharmacokinetic modeling. The result showed that after IG of 200 mg/kg 23-hydroxybetulinic acid, the plasma concentrations reached peaks at 2 h with C(max) of 3.1 microg/mL. The 200 mg/kg 23-hydroxybetulinic acid suspension IG doses were found to have long elimination half-lives of 25.6 h and low bioavailability of 2.3%. No interference was noted due to endogenous substances. These analytical methods should be of value in future studies related to the development and characterization of 23-hydroxybetulinic acid.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Electronic structure and field emission of multiwalled carbon nanotubes depending on growth temperature

The electronic structure of multiwalled carbon nanotubes (CNTs) has been investigated, depending on the growth temperature, using synchrotron X-ray photoelectron spectroscopy (XPS) and field emission measurements. The vertically aligned CNTs are grown via pyrolysis of ferrocene and acetylene in a broad temperature range 600-1000 degrees C. The CNTs have a cylindrical structure with a uniform diameter of 20 nm. As growth temperature increases, due to an improved crystallinity of the graphitic sheets, the width of the XPS C 1s peak becomes narrower and the intensity of the valence band increases. Field emission from the as-grown CNTs exhibits a large enhancement of current density with growth temperature, strongly correlated with the electronic structure revealed by XPS.     

Positioning isolation and biochemical analysis of single DNA molecules based on nanomanipulation and single-molecule PCR

Recently, the isolation and biochemical analysis of DNA at the single-molecule level has been recognized as very important for genetic research and clinical analysis. A unique technique for the positioning, dissection, and isolation of single DNA molecules using atomic force microscopy (AFM) has been demonstrated. Full-length genome DNA molecules were first deposited and stretched by a modified "molecular combing" technique onto a 3-aminopropyl triethoxysilane-coated mica substrate. A single DNA fragment was dissected from one of those genome DNA strands with the AFM tip at the desired position, and then isolated (or picked up) after a special operation called "kneading". All the operations including imaging, dissection, and isolation could be carried out with one tip. The isolated DNA fragment on the AFM tip could be successfully amplified by single-molecule PCR.     

Modification of Cr/SiO2 for the dehydrogenation of propane to propylene in carbon dioxide

Summary Dehydrogenation of propane to propylene in carbon dioxide was investigated over promoted Cr/SiO2. The results showed that the catalysts were effective for the reaction and CO2 in the feed promoted the catalytic activity. XRD, TPR and microcalorimetric adsorption techniques were used to study the structure and surface acidity of the catalysts. It was found that the surface acidity decreased with the increase of K in the Cr/SiO2 and led to the increase of selectivity toward propylene. A propane conversion of 31% with 91% selectivity to propylene over the 5%Cr-0.4%K/SiO2 catalyst was observed at 923 K with CO2 /C3H8 molar ratio of 3.6.     

Hydrodynamic simulation of cell docking in microfluidic channels with different dam structures

The immobilization of biological cells in micro-devices requires high efficiency and easy control while maintaining cell viability. One approach for cell immobilization is to utilize constriction structures such as dams to trap cells in microfluidics. In this paper, we present a comprehensive hydrodynamic analysis of two different types of constriction structures for cell immobilization: dams either in perpendicular or in parallel to the main flow route. Various structural models and experimental conditions were compared for cell docking and alignment, and the pressure and velocity profiles of the flow in the micro-channels and the hydrodynamic force and shear stress on the docked cells were calculated based on fluid dynamic theory and numerical simulation. The effects of the dam structures and cell docking on the flow properties, the transportation efficiency, and the induced stress on the docked cells were analyzed. Improved hydraulic pressure profiles in the auxiliary inlets were discussed for the modulation of the flow characteristics and attenuation of hydrodynamic forces exerted on the cells. Furthermore, a new design combining the advantages of perpendicular and parallel dam structures was proposed for cell-based microfluidics.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

青霉素G钾盐在CTAB胶束中的水解及其抑制

以紫外光谱法研究了青霉素G钾盐(Pen-K)在十六烷基三甲基溴化铵（CTAB）胶束体系中的水解反应, 并探讨了水解反应机理.结果表明, CTAB胶束对Pen-K的水解具有抑制作用; Pen-K在CTAB胶束体系水解时,体系pH值的变化与在水中相似, 表明H＋浓度对这种抑制作用影响较小.红外光谱和微极性研究表明,部分Pen-K钾盐定位于CTAB胶束栅栏层中, 增加了其稳定性.     

戊烯自由基阳离子的密度泛函理论研究

使用密度泛函理论B3LYP方法和6-31G(d,p)、6-31＋G(d,p)、6-311G(d,p)及6-311＋G(d,p)基组，分别对2-C5H10＋和1-C5H10＋的各种构象进行了几何构型优化，并用B3LYP/6-311G(d,p)进行了频率分析计算.计算预言1-C5H10＋具有非平面构型，与以往报导的从头算计算结论相反.在两个自由基阳离子的各种构象的B3LYP几何构型上，进行了B3LYP和UMP2(full)方法的超精细偶合常数计算，得到了比以往更好的结果.     

α′-苯磺酰基-α,β-不饱和酮与开链二烯烃的不对称催化环加成反应

在手性金属钛催化剂存在下 ,研究了α′ 苯磺酰基 α ,β 不饱和酮与开链二烯的不对称催化环加成反应 ,讨论了α′ 苯磺酰基 α ,β 不饱和酮与开链二烯的反应活性和对映选择性 ,以高的收率和光学纯度合成了环己烯衍生物 ,并对部分产物的构型进行了鉴定