Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

Solid-phase synthesis of thalidomide and its analogues

A novel solid-phase synthesis of thalidomide and its metabolites and analogues is described. The synthetic strategy involves the coupling of hydroxymethyl polystyrene with phthalic anhydride to form the resin-linked acid. The acid is then reacted with primary amines followed by acid or base treatment to form thalidomide and its analogues with either open or closed phthalimide rings. Most of the analogues are synthesized with high yields (40.3-98.1% in three steps) and purities (92.3-98.9%).     

Alcohol‐Vapor Inclusion in Single‐Crystal Adsorbents [MII2(bza)4(pyz)]n (M=Rh,Cu): Structural Study and Application to Separation Membranes

The vapor absorbency of the series of alcohols methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol was characterized on the single‐crystal adsorbents [M^II₂(bza)₄(pyz)]_n (bza=benzoate, pyz=pyrazine, M=Rh ( 1 ), Cu ( 2 )). The crystal structures of all the alcohol inclusions were determined by single‐crystal X‐ray crystallography at 90 K. The crystal‐phase transition induced by guest adsorption occurred in the inclusion crystals except for 1‐propanol. A hydrogen‐bonded dimer of adsorbed alcohol was found in the methanol‐ and ethanol‐inclusion crystals, which is similar to a previous observation in 2 ?2EtOH (S. Takamizawa, T. Saito, T. Akatsuka, E. Nakata, Inorg. Chem. 2005 , 44, 1421–1424). In contrast, an isolated monomer was present in the channel for 1‐propanol, 1‐butanol, and 1‐pentanol inclusions. All adsorbed alcohols were stabilized by hydrophilic and/or hydrophobic interactions between host and guest. From the combined results of microscopic determination (crystal structure) and macroscopic observation (gas‐adsorption property), the observed transition induced by gas adsorption is explained by stepwise inclusion into the individual cavities, which is called the “step‐loading effect.” Alcohol/water separation was attempted by a pervaporation technique with microcrystals of 2 dispersed in a poly(dimethylsiloxane) membrane. In the alcohol/water separation, the membrane showed effective separation ability and gave separation factors (alcohol/water) of 5.6 and 4.7 for methanol and ethanol at room temperature, respectively.     

Synthesis of 99mTc(CO)3-NOET via [99mTc(OH2)3(CO)3]+ precursor and comparative biological studies with 99mTcN-noet

Summary The organometallic precursor fac-[^99mTc(CO)₃(H₂O)₃]⁺ was reacted with N-ethoxy, N-ethyl dithiocarbamate (NOET) in phosphate buffered saline (pH 7.4) at room temperature for 30 minutes to produce the ^99mTc(CO)₃-NOET complex. The radiochemical purity (RCP) of the product was over 90% as measured by thin layer chromatography (TLC). No decomposition of the complex at room temperature (RT) was observed over a period of 6 hours. Its partition coefficient indicated that it was a lipophilic complex. The biodistribution comparison in mice of the ^99mTc(CO)₃-NOET complex and the ^99mTcN-NOET complex showed that the former had a lower heart and brain uptake as compared to that of the latter, suggesting the incorporation of the [^99mTc(CO)₃]⁺ core into the NOET ligand does not improve the biological features as a myocardial imaging agent.     

Determination of Dopamine in the Presence of Ascorbic Acid Using a Poly(Amidosulfonic Acid) Modified Glassy Carbon Electrode

A glassy carbon electrode (GCE) was modified with electropolymerized films of amidosulfonic acid in pH 7.0 phosphate buffer solution (PBS) by cyclic voltammetry (CV). The modified electrode showed an excellent electrocatalytical effect on the oxidation of dopamine (DA). In pH 7.0 PBS, the anodic peak current increased linearly with the concentration of DA in the range of 5.0×10^–7 1.0×10^–4moldm^–3, with a correlation coefficient of 0.9932, and a detection limit (S/N=3) of 1.0× 10^–7moldm^–3. The relative standard deviation of 10 successive scans was 2.5% for 1.0×10^–6moldm^–3 DA. The interference of ascorbic acid (AA) with the determination of DA could be eliminated because of the very distinct attracting interaction between DA cations and the negatively poly(amidosulfonic acid) film in pH 7.0 PBS. The proposed method exhibited good recovery and reproducibility.     

Capillary liquid chromatography-microcoil 1H nuclear magnetic resonance spectroscopy and liquid chromatography-ion trap mass spectrometry for on-line structure elucidation of isoflavones in Radix astragali

Miniaturization and hyphenation of chromatographic separation techniques to nuclear magnetic resonance spectroscopy is being increasingly demanded in the field of biomedical, drug metabolite and natural product analysis. Herein, capillary liquid chromatography was coupled on-line to microcoil 1H nuclear magnetic resonance spectroscopy (capLC-NMR) equipped with a 1.5 microL solenoidal probe for structure elucidation of isoflavones in Radix astragali. The extract was screened by HPLC-UV-MS as the preliminary step and four major peaks were identified tentatively by ion trap mass spectrometry molecular weights and characteristic fragments. Then, stopped-flow capLC-UV-NMR was performed using 33 microg extract injected on-column. The four peaks were parked manually in the micro probe one by one and corresponding 1H NMR spectra were recorded with good resolutions under the applied capLC-NMR conditions (120 and 220 ng injected on-column for peaks 2 and 4, respectively). All aromatic regions of 1H NMR spectra correlated well to the characteristic signals of isoflavone aglycone protons. And the signal corresponding to the anomeric proton of the glucopyranoside of isoflavone glycoside was also obtained for peak 1. Therefore, these four peaks are determined as calycosin-7-O-beta-D-glucopyranoside (1), ononin (2), calycosin (3) and formononetin (4) unambiguously. The capLC-NMR results indicate that this hyphenated technique could be used for the determination of a great variety of natural products from small sample amounts, e.g., only 5 g R. astragali in this study.     

High-dimensional architectures from the self-assembly of lanthanide ions with benzenedicarboxylates and 1,10-phenanthroline

Six new coordination polymers, [Eu(1,2-BDC)(1,2-HBDC)(phen)(H(2)O)](n) (1), [Eu(2)(1,3-BDC)(3)(phen)(2)(H(2)O)(2)](n).4nH(2)O (2), [Eu(1,4-BDC)(3/2)(phen)(H(2)O)](n) (3), [Yb(2)(1,2-BDC)(3)(phen)(H(2)O)(2)](n).3.5nH(2)O (4), [Yb(2)(1,3-BDC)(3)(phen)(1/2)](n) (5), and [Yb(2)(1,4-BDC)(3)(phen)(2)(H(2)O)](n) (6), were synthesized by hydrothermal reactions of lanthanide chlorides with three isomers of benzenedicarboxylic acid (H(2)BDC) and 1,10-phenanthroline (phen), and characterized by single-crystal X-ray diffraction. 1 has a 2-D herringbone architecture with a Z-shaped cavity. 2 and 5 have different 3-D networks, but both are formed by 1,3-BDC anions bridging metal centers (Eu or Yb) via carboxylate groups. 3 and 6 possess similar layer structures which are further constructed to form 3-D networks by hydrogen bonds and/or pi-pi aromatic interactions. 4 comprises 1-D chains that are further interlinked via hydrogen bonds, resulting in a 3-D network. In the three europium complexes, all the europium ions are eight-coordinated, while the coordination numbers of the ytterbium ions in other three-coordination polymers range from six to eight. Crystal data: for 1, monoclinic, space group P2(1)/c, with a = 12.565(6) A, b = 16.005(8) A, c = 12.891(6) A, beta = 102.173(8) degrees, and Z = 4; for 2, monoclinic, space group P2(1)/c, with a = 20.979(4) A, b = 11.5989(19) A, c = 20.810(3) A, beta = 110.391(3) degrees, and Z = 4; for 3, triclinic, space group P1, with a = 10.331(5) A, b = 10.887(5) A, c = 11.404(5) A, alpha = 107.660(7) degrees, beta = 91.787(7) degrees, gamma = 112.946(6) degrees, and Z = 2; for 4, triclinic, space group P1, with a = 11.517(5) A, b = 13.339(5) A, c = 13.595(6) A, alpha = 87.888(7) degrees, beta = 67.759(6) degrees, gamma = 68.070(6) degrees, and Z = 2; for 5, orthorhombic, space group C222(1), with a = 8.174(2) A, b = 24.497(7) A, c = 29.161(8) A, and Z = 8; for 6, triclinic, space group P1, with a = 10.349(3) A, b = 11.052(3) A, c = 19.431(6) A, alpha = 105.464(4) degrees, beta = 91.300(5) degrees, gamma = 93.655(5) degrees, and Z = 2. The magnetic properties of 1 and 4 were investigated. The photophysical properties of 1 were also studied.     

汽油族组成的近红外光谱快速测定

以荧光指示剂吸附色谱法（FIA）测定汽油族组成结果为基础，采用近红外光谱和化学计量学方法建立了快速、准确测定催化裂化馏出口汽油族组成（饱和烃、烯烃和芳烃）的分析模型；试验表明，该法分析速度快、重复性好、成本低，特别适用于生产中间控制分析。     

不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究

用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0～ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强     

Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).