Homoclinic and Periodic Orbits Arising Near the Heteroclinic Cycle Connecting Saddle-focus and Saddle Under Reversible Condition

In this paper, we study the dynamical behavior for a 4-dimensional reversible system near its heteroclinic loop connecting a saddle-focus and a saddle. The existence of infinitely many reversible 1-homoclinic orbits to the saddle and 2-homoclinic orbits to the saddle-focus is shown. And it is also proved that, corresponding to each 1-homoclinic （resp. 2-homoclinic） orbit F, there is a spiral segment such that the associated orbits starting from the segment are all reversible 1-periodic （resp. 2-periodic） and accumulate onto F. Moreover, each 2-homoclinic orbit may be also accumulated by a sequence of reversible 4-homoclinic orbits.     

Direct mass measurements of neutron-deficient 152Sm projectile fragments at the FRS-ESR facility

The FRS-ESR facility at GSI provides one of the most efficient methods for direct mass measurements. In the present experiment, exotic nuclei were produced via fragmentation of ¹⁵²Sm projectiles in a thick beryllium target at 500-600 MeV/u, separated in-flight with the fragment separator FRS, and injected into the storage-cooler ring ESR. Time-resolved Schottky Mass Spectrometry was applied for mass measurements of stored and electron-cooled bare and few-electron ions. 373 different nuclides were identified by means of the spectra of their revolution frequencies. Masses for 18 nuclides (⁸⁴Zr, ⁹²Ru, ⁹⁴Rh, ^107,108,110Sb, ^111,112,114I, ¹¹⁸Ba, ^122,123La, ¹²⁴Ce, ¹²⁷Pr, ¹²⁹Nd, ¹³²Pm, ¹³⁴Sm, ¹³⁷Eu) have been determined for the first time. Masses for ^111,112I and ¹¹³Xe have been obtained via known α-decay energies. The experiment and first results will be presented.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

N-Widths and Average Widths of Besov Classes in Sobolev Spaces

In this paper, we consider the n-widths and average widths of Besov classes in the usual Sobolev spaces. The weak asymptotic results concerning the Kolmogorov n-widths, the linear n-widths, the Gel＇fand n-widths, in the Sobolev spaces on T^d, and the infinite-dimensional widths and the average widths in the Sobolev spaces on Ra are obtained, respectively.     

Determination of gold in ore by flame atomic absorption spectrometry with flow-injection on-line sorbent extraction preconcentration

Gold in ores was determined by flame atomic absorption spectrometry following on-line preconcentration by sorbent extraction in a flow-injection system. The medium polarity adsorption resin Amberlite XAD-8 packed in a 220-μl micro-column was used to collect gold(III) from hydrochloric acid sample solutions for 40 s at 7.6 ml/min. Ethanol was used to elute the adsorbed analytes into the nebulizer. Optimization studies were made on sample loading rate, elution rate and sample acidity. Some possible interferences on the determination are discussed. A 35-fold enrichment was achieved at a sampling frequency of 60 h^?1 and with an RSD of 1.4%. The detection limit (3σ) and 2 μg l^?1. Results for gold in ore samples showed good agreement with those obtained using activated carbon adsorption preconcentration. The recoveries were 97–108%.     

Eu3+离子在微晶玻璃研究中的探针作用

制备出单掺Eu3+离子的氟氧化物玻璃陶瓷系列样品,利用Eu3+离子作为荧光探针,通过热处理前后Eu3+离子发射光谱中电偶极子跃迁与磁偶极子跃迁强度比值的变化表征在玻璃材料中微晶是否形成,分析了Eu3+离子荧光发射谱中电偶极子跃迁与晶体场对称性的关系,进一步表征了稀土离子所处微晶晶格场的变化.     

缺陷态透射率可调的三缺陷层的一维光子晶体

利用传输矩阵方法，从理论上研究了三缺陷层一维光子晶体的光学性质.在缺陷层间距足够大以致于出现缺陷态简并的情况下，调节第一或第三个缺陷层的光学厚度，光子晶体缺陷态的透射率会发生最大程度的变化.这种结构可同时具有窄带滤波器和光开关的功能，据此提出了一种低阈值光开关的设计.把折射率可调的向列型液晶作为晶体的第三个缺陷层，并用4×4传输矩阵方法计算了其缺陷态透射率与电场电压的关系.     

磁控溅射ZnO薄膜的成核机制及表面形貌演化动力学研究

利用原子力显微镜分析了ZnO薄膜在具有本征氧化层的Si(100)和Si(111)基片上的表面形貌 随沉积时间的演化. 通过对薄膜生长形貌的动力学标度表征，研究了射频反应磁控溅射条件 下，ZnO薄膜的成核过程及生长动力学行为. 研究发现，ZnO在基片表面的成核过程可分为初 期成核阶段、低速率成核阶段和二次成核阶段. 对于Si(100)基片，三个成核阶段的生长指 数分别为β₁=1.04，β₂=0.25±0.01，β₃=0.74；对 于Si(11 关键词： ZnO薄膜 磁控溅射 生长动力学 成核机制     

纳米晶复合Pr2Fe14B/α-Fe永磁材料磁性的研究

采用熔体快淬的方法制备Pr₂Fe₁₄B/α-Fe纳米晶复合永磁材料.使用振动样品磁强计(VSM)测量样品的室温磁性能.实验合金成分为(Pr_xFe_94.3-xB_5.7)_0.99Zr₁(其中x＝8.2，8.6，9.0，9.4，9.8，10.2，10.6，11.0，11.4(原子分数，%)).系统地研究了辊速及合金成分对快淬带磁性能的影响，当Pr原子分数由8. 关键词： 纳米复合永磁材料 熔体快淬 2Fe₁₄B/α-Fe')" href="#">Pr₂Fe₁₄B/α-Fe 磁性     

不均匀磁化薄膜中静磁波对导波光的Bragg衍射

研究了横向不均匀偏置磁场作用下掺Bi的YIG薄膜中微波静磁波的激发和传播特性；采用变分方法计算了静磁正向体波的色散关系和交变磁化强度，分析了不均匀场对静磁波－导波光耦合的影响理论计算得到的衍射效率曲线与实验结果基本一致，表明适当不均匀场可以大大提高磁光Bragg器件的衍射性能.