阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。     

（FeCp2）0．65FNi（C3S7）2]的合成及表征

合成了一种新型的导电配位型化合物（FeCp2）0．65FNi（C3S7）2].通过元素分析（EA），电感耦合等离子体原子发射光谱（ICP—AES），核磁共振（^1HNMR），紫外光谱（UV）对该化合物进行了表征。     

Building 2D classification models and 3D CoMSIA models on small-molecule inhibitors of both wild-type and T790M/L858R double-mutant EGFR

Molecular Diversity - Epidermal growth factor receptor (EGFR) has received widespread attention because it is an important target for anticancer drug design. Mutations in the EGFR, especially the...     

A wide dynamic range laser rangefinder with cm-level resolution based on AGC amplifier structure

A pulsed time-of-flight (TOF) laser rangefinder with a pulsed laser diode and an avalanche photo diode (APD) receiver is constructed and tested. Trigged by an avalanche transistor, the laser diode can emit a periodic pulse with rise time of ～2 ns. A new structure with auto gain control (AGC) circuits both in the pre-amplifier and the post-amplifier is presented. Through this technology, not only the dynamic range of the receiver is extended, but also the walk error of timing discriminators is reduced. Large measurement range from 5 m to 500 m is achieved without any cooperative target. The single-shot precision is 3 cm for the weakest signal. Compared with previous laser rangefinders, the complexity of this system is greatly simplified.     

Dissociative and molecular oxygen chemisorption channels on reduced rutile TiO2(110): An STM and TPD study

High-resolution scanning tunneling microscopy (STM) and temperature-programmed desorption (TPD) were used to study the interaction of O₂ with reduced TiO₂(110)–(1 × 1) crystals. STM is the technique of choice to unravel the relation between vacancy and non-vacancy assisted O₂ dissociation channels as a function of temperature. It is revealed that the vacancy-assisted, first O₂ dissociation channel is preferred at low temperature (~ 120 K), whereas the non-vacancy assisted, second O₂ dissociation channel operates at temperatures higher than 150 K–180 K. Based on the STM results on the two dissociative O₂ interaction channels and the TPD data, a new comprehensive model of the O₂ chemisorption on reduced TiO₂(110) is proposed. The model explains the relations between the two dissociative and the molecular O₂ interaction channels. The experimental data are interpreted by considering the available charge in the near-surface region of reduced TiO₂(110) crystals, the kinetics of the two O₂ dissociation channels as well as the kinetics of the diffusion and reaction of Ti interstitials.     

狭缝的演变与彩虹全息术的发展

彩虹全息术的发生与发展是与狭缝的引入与演变相关的。本文试图用一个简明的表格形式把迄今为止存在着的各种彩虹全息图及其变化状态做一个形象化的小结。     

掺杂纳米半导体超微粒ZnS:Mn2+光学特性研究

九十年代对纳米尺寸(nanoscale)材料的光物理性质的深入研究,导致了介于微观与宏观物理间的新的学科一介观物理(mesoscopic physics)的产生.其科学义在于建立和发展介于原子分子和固体之间所谓介观系统(mesoscopic system)的量子理论,揭示介观物质特性及其相互作用本质,并利用介观特性探索新型结构和功能材料.以往对纳米半导体超微粒材料的研究主要集中于与本征特性相关的量子尺寸效应,或缺陷对超微粒本征特性的影响[1,2].超微粒中过渡金属离子中心发光性质研究首次报道于1993年[3,4]并指出这可能成为崭新的一类发光材料.     

Improved DOSY NMR data processing by data enhancement and combination of multivariate curve resolution with non-linear least square fitting

The quality of DOSY NMR data can be improved by careful pre-processing techniques. Baseline drift, peak shift, and phase shift commonly exist in real-world DOSY NMR data. These phenomena seriously hinder the data analysis and should be removed as much as possible. In this paper, a series of preprocessing operations are proposed so that the subsequent multivariate curve resolution can yield optimal results. First, the baseline is corrected according to a method by Golotvin and Williams. Next, frequency and phase shift are removed by a new combination of reference deconvolution (FIDDLE), and a method presented by Witjes et al. that can correct several spectra simultaneously. The corrected data are analysed by the combination of multivariate curve resolution with non-linear least square regression (MCR-NLR). The MCR-NLR method turns out to be more robust and leads to better resolution of the pure components than classic MCR.