Preparation of crosslinked polystyrene-supported ethylenediamine via a S-containing spacer and adsorption properties towards metal ions

Two novel chelating resins were prepared by anchoring ethylenediamine to crosslinked polystyrene via a spacer containing sulfide. Their structures were characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM). Porous structure parameters of the resins were measured by ASAP 2020 using BET and BJH methods. Their adsorption capacities for several heavy metal ions especially Hg²⁺ were investigated. The results showed that for the two resins, the more N contents did not mean the better adsorption capacity and the saturated adsorption capacity of poly(2-ethylenediamidomercaptomethylstyrene) (PSM-EDA) for Hg²⁺ could reach to 3.0 mmol/g at room temperature. Isothermal adsorptions of the resins for Hg²⁺ could be described by Langmuir formula. The adsorption mechanism of the resins for Hg²⁺, Cu²⁺ and Ag⁺ was confirmed by X-ray photoelectron spectroscopy (XPS) and FTIR.     

BLUE LIGHT-EMITTING COIL-ROD-COIL BLOCK OLIGOMERS WITH RIGID p-HEXAPHENYL AS CHROMOPHORE

The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b- poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP- EO3）, 8 （EOs-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by ^1H-NMR, 13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃ under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.     

Ab initio study on the mechanism of reaction HNCO+NH2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH₂+ HNCO?NH₃+NCO (1) and NH₂+HNCO?N₂H₃+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300–2700 K, transition theory rate constant for reaction (1) is 1.68×10¹¹–3.29×10¹¹ mL·mol^-1·s^-1, which is close to the experimental one of 5.0×10¹¹mL·mol^-1·s^-1or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes,cis andtrans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (forcis-mode) and 147.43 kJ/mol (fortrans-mode), respectively, which is much higher than reaction (1). So reaction (1) is the main channel for the titled reaction.     

E,E-1,4-二[2′,2″-(苯并噁唑基乙烯基)]苯及其衍生物的合成和光性能研究

合成了E,E-1,4-二[2′,2″-(苯并(口恶)唑基乙烯基)]苯及衍生物共14种,测定了它们的熔点、红外光谱、核磁共振氢谱、紫外吸收光谱和荧光发射光谱、荧光量子产率及激光性能。     

Cure behavior and thermal stability of an epoxy: new bismaleimide blends for composite matrices

A new bismaleimide (BMI) resin was synthesized to formulate epoxy(tetraglycidyl diaminodiphenyl methane; TGDDM) – bismaleimide thermoset blends for composite matrix applications. 4,4′-diaminodiphenyl methane (DDM) was used as an amine curing agent for the TGDDM. A Fourier transform infrared (FTIR) spectroscopy was employed to characterize the new BMI resin. Cure behavior of the epoxy–BMI blends was studied using a differential scanning calorimeter (DSC). DSC thermograms of the thermoset blends indicated two exothermic peaks. The glass transition temperature of the thermoset blends decreased with BMI content. Thermogravimetric analysis (TGA) was carried out to investigate thermal degradation behavior of the cured epoxy–BMI thermoset blends. The new BMI resin reacted partially with the DDM and weak intercrosslinking polymer networks were formed during cure of the thermoset blends.     

Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation

A poly(dimethylsiloxane) (PDMS) microfluidic chip surface was modified by multilayer-adsorbed and heat-immobilized poly(vinyl alcohol) (PVA) after oxygen plasma treatment. The reflection absorption infrared spectrum (RAIRS) showed that 88% hydrolyzed PVA adsorbed more strongly than 100% hydrolyzed one on the oxygen plasma-pretreated PDMS surface, and they all had little adsorption on original PDMS surface. Repeating the coating procedure three times was found to produce the most robust and effective coating. PVA coating converted the original PDMS surface from a hydrophobic one into a hydrophilic surface, and suppressed electroosmotic flow (EOF) in the range of pH 3-11. More than 1,000,000 plates/m and baseline resolution were obtained for separation of fluorescently labeled basic proteins (lysozyme, ribonuclease B). Fluorescently labeled acidic proteins (bovine serum albumin, beta-lactoglobulin) and fragments of dsDNA phiX174 RF/HaeIII were also separated satisfactorily in the three-layer 88% PVA-coated PDMS microchip. Good separation of basic proteins was obtained for about 70 consecutive runs.     

Filtered backprojection for the reconstruction of a high-resolution (4,2)D CH3-NH NOESY spectrum on a 29 kDa protein

Projection-reconstruction (PR) NMR enables rapid collection of multidimensional NMR data. NOESY represents a particularly difficult challenge for currently existing reconstruction algorithms, as it requires the quantitative reconstruction of an unknown number of peaks, at full sensitivity. We have demonstrated the successful application of PR-NMR to NOESY by determining the 4D methyl/amide NOESY spectrum of a 29 kDa protein, human carbonic anhydrase II, from 2D projections, using filtered backprojection for reconstruction. Compared with a 3D control spectrum, all expected peaks were faithfully reconstructed, with correct volumes and with no artifacts. Filtered backprojection thus provides a way to obtain high-resolution 4D NOESY data in the time required for conventional 3D data collection.     

改性Y分子筛的酸碱性能及吸附性能的研究

吡啶、吡咯、苯、甲苯、乙苯作为探针分子，在Li＋, Na＋, K＋, Cs＋改性的Y型分子筛上进行吸附，用TPD及IR方法系统地研究了不同碱金属离子改性的Y型分子筛的酸碱性能和吸附性能的变化. 结果表明，按Li、Na、K、Cs的顺序, 随着碱金属离子半径的增大, 其L酸酸强度依次减弱，L碱的强度逐渐增强.由于改性Y型分子筛所含碱金属离子的不同，其对芳烃的吸附的强弱及吸附量的大小亦不同.随着骨架外的阳离子的半径逐渐增大，碱的强度逐渐增强，与芳烃的作用愈强烈，导致TPD脱附峰温增高及芳烃和侧链上的C－H伸缩振动谱带向低波数位移愈多.由于位阻的原因，对含同一种碱金属离子的分子筛来说，随着芳烃侧链C数的增加，芳烃的吸附量逐渐减小.     

氢在钯单晶表面的解离与在体相的扩散

氢分子在金属表面的解离吸附与氢原子在金属体相的扩散是个典型的表面过程.前者在甲烷化及合成氨等基础化工反应中起着关键作用;后者常常导致金属材料的脆化与断裂,但过渡金属及其合金是安全和优良的储氢材料.因此,研究氢分子在金属表面的解离吸附与氢原子在金属体相的扩散,是多相催化与金属物理广泛感兴趣的课题,具有重要的理论和应用价值.本文采用分子动力学方法初步探讨了二者之间的关联.分子催化动力学为从微观层次上研究上述课题提供了一种理论方法.本文采用经过我们改进的半经验LEPS方法,计算了氢分子在Pd(100)和(110)晶面的解离和氢原子在钯表面与体相扩散的相互作用位能面,并根据计算结果探讨了其微观机理.     

Use of nitrocellulose films for affinity-directed mass spectrometry for the analysis of antibody/antigen interactions

Combination of affinity extraction procedures with mass spectrometric analyses is termed affinity-directed mass spectrometry, a technique that has gained broad interest in immunology and is extended here with several improvements from methods used in previous studies. A monoclonal antibody was immobilized on a nitrocellulose (NC) membrane, allowing the corresponding antigen to be selectively captured from a complex solution for analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). This method was also used to rapidly determine the approximate binding region responsible for the antibody/antigen interaction. The tryptic fragments of antigen protein in buffer were applied to the antibody immobilized on NC film and allowed to interact. The NC film was then washed to remove salts and other unbound components, and subjected to analysis by MALDI-TOFMS. Using interferon-alpha(2a) and anti-interferon-alpha(2a) monoclonal antibody IgG as a model system, we successfully extracted the antigen protein and determined the approximate binding region for the antigen/antibody interaction (i.e., the tryptic fragment responsible).