Novel optical polarizer design based on metasurface nano aperture for biological sensing in mid-infrared regime

Since Metasurfaces are playing important roles in optical devices such as optical polarizers and detectors, in this article, we have proposed a novel shape of nano aperture antenna for mid-infrared applications such as bio-sensing and other potential optical applications based on plasmonic characteristic of the gold layer over the SiN substrate. The transmittance tensor is obtained for vertical and horizontal linear polarization and base on boundary condition of the metasurface, the circular polarizations are extracted which are confirmed by the electric field distributions. We have shown by the parametric studies that the phase difference is altered by the gap and slot width and so with the dimension modification, we are able to achieve circular polarizer in the optical range. The biological materials with a thickness of 80 nm have then been placed over the metasurface layer and the figures of merits have been obtained. We have revealed that when the circular polarization is osculated to the metasurface at a special frequency the linear polarization is obtained in the other side of the metasurface. The nano aperture has been modeled and the finite difference time domain calculations are performed in CST Microwave Studio as a commercial full wave simulation software.     

A 3D-CMOS compatible silicon photo-sensor with a large vertical photosensitive area

This paper introduces design and simulation of a three-dimensional complementary metal–oxide–semiconductor CMOS compatible photo-sensor based on a silicon substrate. In the structure of photo-sensor, a vertical n+/p junction as a photosensitive area is formed on one side of a U-groove, and perpendicular to a lateral n-i-p structure on top-side of the silicon surface. This configuration enables a direct butt-coupling of a fiber-optic to the photosensitive area, which is a privilege for many remote monitoring applications. The device analysis is carried out by a two-dimensional simulation using SILVACO TCAD simulator. The thickness of the photo-sensitive area is investigated by considering the figures of merit for the two different thicknesses of 30 and 50 µm. The simulated results (according to the parameters defined for the Si substrate) show a very low dark current of 70 and 100 (fA/μm) for the 30 and 50 µm thicknesses, respectively. In addition, a high photo-current to dark current ratio of ~3000 is achieved under an intensity of 2 mW/cm² at 633 nm wavelength, according to the wavelength of red He–Ne laser. The sensor demonstrates a responsivity of 0.33 A/W corresponding to 65% external quantum efficiency and a ?3 dB frequency response of 0.2 GHz under a small signal of 2 mW/cm² at 633 nm wavelength for 10 V reverse bias.     

The effect of material properties on the performance of a new geometry PEM fuel cell

In this paper a computational dynamics model for duct-shaped geometry proton exchange membrane (PEM) fuel cell was used to investigate the effect of changing gas diffusion layer and membrane properties on the performances, current density and gas concentration. The proposed model is a full cell model, which includes all the parts of the PEM fuel cell, flow channels, gas diffusion electrodes, catalyst layers and the membrane. Coupled transport and electrochemical kinetics equations are solved in a single domain; therefore no interfacial boundary condition is required at the internal boundaries between cell components. This computational fluid dynamics code is used as the direct problem solver, which is used to simulate the 2-dimensional mass, momentum and species transport phenomena as well as the electron- and proton-transfer process taking place in a PEMFC that cannot be investigated experimentally. The results show that by increasing the thickness and decreasing the porosity of GDL the performance of the cell enhances that it is different with planner PEM fuel cell. Also the results show that by increasing the thermal conductivity of the GDL and membrane, the overall cell performance increases.     

Interaction of longitudinal phonons with discrete breather in strained graphene

We numerically analyze the interaction of small-amplitude phonon waves with standing gap discrete breather (DB) in strained graphene. To make the system support gap DB, strain is applied to create a gap in the phonon spectrum. We only focus on the in-plane phonons and DB, so the issue is investigated under a quasi-one-dimensional setup. It is found that, for the longitudinal sound waves having frequencies below 6 THz, DB is transparent and thus no radiation of energy from DB takes place; whereas for those sound waves with higher frequencies within the acoustic (optical) phonon band, phonon is mainly transmitted (reflected) by DB, and concomitantly, DB radiates its energy when interacting with phonons. The latter case is supported by the fact that, the sum of the transmitted and reflected phonon energy densities is noticeably higher than that of the incident wave. Our results here may provide insight into energy transport in graphene when the spatially localized nonlinear vibration modes are presented.     

Film-Forming Spray of Water-Soluble Chitosan Containing Liposome-Coated Human Epidermal Growth Factor for Wound Healing

Human epidermal growth factor (hEGF) has been known to have excellent wound-healing activity. However, direct application to the wound area can lead to low hEGF bioavailability due to protease enzymes or endocytosis. The use of liposomes as coatings and carriers can protect hEGF from degradation by enzymes, chemical reactions, and immune reactions. Sustained release using a matrix polymer can also keep the levels of hEGF in line with the treatment. Therefore, this study aimed to develop a film-forming spray of water-soluble chitosan (FFSWSC) containing hEGF-liposomes as a potential wound dressing. The hEGF-liposomes were prepared using the hydration film method, and the preparation of the FFSWSC was achieved by the ionic gelation method. The hydration film method produced hEGF-liposomes that were round and spread with a Z-average of 219.3 nm and encapsulation efficiency of 99.87%, whereas the film-forming solution, which provided good sprayability, had a formula containing 2% WSC and 3% propylene glycol with a viscosity, spray angle, droplet size, spray weight, and occlusion factor of 21.94 ± 0.05 mPa.s, 73.03 ± 1.28°, 54.25 ± 13.33 µm, 0.14 ± 0.00 g, and 14.57 ± 3.41%, respectively. The pH, viscosity, and particle size of the FFSWSC containing hEGF-liposomes were stable during storage for a month in a climatic chamber (40 ± 2 °C, RH 75 ± 5%). A wound healing activity test on mice revealed that hEGF-liposomes in FFSWSC accelerated wound closure significantly, with a complete wound closure on day 6. Based on the findings, we concluded that FFSWSC containing hEGF-liposomes has the potential to be used as a wound dressing.     

Removal of divalent nickel cations from aqueous solution by multi-walled carbon nano tubes: equilibrium and kinetic processes

Release of heavy metals into water as a result of industrial activity may pose a serious threat to the environment. In this study, the potential of multi-walled carbon nano tubes (MWCNT) to remove Ni²⁺ cations from aqueous solutions was investigated in a batch reactor under different experimental conditions. The effects on the removal process of conditions such as initial concentration of Ni²⁺ ions, temperature, and adsorbent mass were investigated. Nickel uptake was quantitatively evaluated by use of the Langmuir, Freundlich, and Dubinin?CKaganer?CRadushkevich isotherm models. For 20?mg/L initial Ni²⁺ cation concentration, adsorption capacity increased from 8.12 to 11.75?mg/g when the temperature was increased from 25 to 65?°C, an indication of the endothermic nature of adsorption process. In addition, the adsorption equilibrium was well described by the Langmuir isotherm model; maximum adsorption capacity was 17.86?mg/g Ni²⁺ cations on HNO₃-treated MWCNT (t-MWCNT). The results obtained in this study show that adsorption of Ni²⁺ on t-MWCNT is a spontaneous and endothermic process. By use of second-order kinetic constants and the Arrhenius equation, the activation energy of adsorption (E _a) was determined as 5.56?kJ?mol^?1.     

Proteomics of cypress pollen allergens using double and triple one-dimensional electrophoresis

Italian cypress (Cupressus sempervirens, Cups) pollen causes allergic diseases in inhabitants of many of the cities surrounding the Mediterranean basin. However, allergens of Cups pollen are still poorly known. We introduce here a novel proteomic approach based on double one‐dimensional gel electrophoresis (D1‐DE) as an alternative to the 2‐DE immunoblot, for the specific IgE screening of allergenic proteins from pollen extracts. The sequential one‐dimensional combination of IEF and SDS‐PAGE associated with IgE immunoblotting allows a versatile multiplexed immunochemical analysis of selected groups of allergens by converting a single protein spot into an extended protein band. Moreover, the method appears to be valuable for MS/MS identification, without protein purification, of a new Cups pollen allergen at 43 kDa. D1‐DE immunoblotting revealed that the prevalence of IgE sensitization to this allergen belonging to the polygalacturonase (PG) family was 70% in tested French allergic patients. In subsequent triple one‐dimensional gel electrophoresis, the Cups pollen PG was shown to promote lectin‐based protein‐protein interactions. Therefore, D1‐DE could be used in routine work as a convenient alternative to 2‐DE immunoblotting for the simultaneous screening of allergenic components under identical experimental conditions, thereby saving considerable amounts of sera and allergen extracts.     

Thermal Degradation Kinetics and Modeling Study of Ultra High Molecular Weight Polyethylene (UHMWP)/Graphene Nanocomposite

The incorporation of nanofillers such as graphene into polymers has shown significant improvements in mechanical characteristics, thermal stability, and conductivity of resulting polymeric nanocomposites. To this aim, the influence of incorporation of graphene nanosheets into ultra-high molecular weight polyethylene (UHMWPE) on the thermal behavior and degradation kinetics of UHMWPE/graphene nanocomposites was investigated. Scanning electron microscopy (SEM) analysis revealed that graphene nanosheets were uniformly spread throughout the UHMWPE’s molecular chains. X-Ray Diffraction (XRD) data posited that the morphology of dispersed graphene sheets in UHMWPE was exfoliated. Non-isothermal differential scanning calorimetry (DSC) studies identified a more pronounced increase in melting temperatures and latent heat of fusions in nanocomposites compared to UHMWPE at lower concentrations of graphene. Thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) revealed that UHMWPE’s thermal stability has been improved via incorporating graphene nanosheets. Further, degradation kinetics of neat polymer and nanocomposites have been modeled using equations such as Friedman, Ozawa–Flynn–Wall (OFW), Kissinger, and Augis and Bennett’s. The "Model-Fitting Method” showed that the auto-catalytic nth-order mechanism provided a highly consistent and appropriate fit to describe the degradation mechanism of UHMWPE and its graphene nanocomposites. In addition, the calculated activation energy (E_a) of thermal degradation was enhanced by an increase in graphene concentration up to 2.1 wt.%, followed by a decrease in higher graphene content.     

Influence of hybrid system of nanofillers on the functional properties of postconsumer PET‐G–based nanocomposites

In this article, postconsumer poly (ethylene glycol‐co‐1,4‐cyclohexanedimethanol terephthalate) (PET‐G) foils have been modified with three types of carbon nanofillers that differ in size and shape, ie, multiwalled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNP), and nanosized carbon black (nCB), thus enabling the reusage of recyclate in receiving new functional materials. The series of polymer hybrid nanocomposites have been prepared via a two‐stage polycondensation process, be means of glycolysis of postconsumer PET‐G foil, followed by polycondensation in the presence of carbon nanofillers. The scanning electron microscopy revealed that nanoadditives were uniformly dispersed into the whole volume of polymer matrix. The results present the synergistic effect of hybrid system of nanofillers in improving tensile properties of PET‐G. It has been found that the incorporation of three types of carbon nanofillers has not affected the glass transition temperature of the polymer matrix. Moreover, the incorporation of carbon nanofillers, and the mixture of two, or even three of those, caused an improvement in thermal conductivity and thermal stability.