α－甲基丙烯酸烯丙酯的合成及其自由基、阴离子聚合的研究

合成了α－甲基丙烯酸烯丙酯（ＡＭＡ），并对其自由基、阴离子聚合进行了探讨。结果发现，该单体难以进行选择性自由基聚合，但可用作多种单体自由基聚合的交联剂。用１，１′－二苯基己基锂在ＴＨＦ中引发ＡＭＡ，可顺利地进行α位双键的选择性阴离子聚合，分子量实测值与计算值基本一致。在较低温度下（≤－６０℃），可得窄分布ＰＡＭＡ（Ｍｗ／Ｍｎ＝１．１２～１．１５）。随聚合温度升高，间同和无规聚合物含量分别呈下降和上升趋势。ＧＰＣ、１ＨＮＭＲ及ＦＴＩＲ鉴定表明，用阴离子聚合法可得到溶于多种溶剂、每个重复单元上均定量带有烯丙基双键的窄分布官能性ＰＡＭＡ。     

Preparation of 5-substituted benzylbarburituric acids and investigation of the effect of the benzyl and substituted benzyl groups on the acidity of barbituric acid

The acidity of 5-benzylbarbituric acid and a series of 5-substituted benzylbarbituric acids has been determined in 50% ethanol/water and they were found to be more acidic than barbituric acid. The pK_as of these derivatives obey Hammett's equation indicating that their acidity is affected by substituents in the same manner as the benzoic acid ionization constants. A synthesis of these acids is described.     

Synthetic enantiopure aziridinomitosenes: preparation, reactivity, and DNA alkylation studies

An enantiocontrolled route to aziridinomitosenes had been developed from l-serine methyl ester hydrochloride. The tetracyclic target ring system was assembled by an internal azomethine ylide cycloaddition reaction based on silver ion-assisted intramolecular oxazole alkylation and cyanide-induced ylide generation via a labile oxazoline intermediate (62 to 66). Other key steps include reductive detritylation of 26, methylation of the N-H aziridine 56, oxidation of the sensitive cyclohexenedione 68 to quinone 70, and carbamoylation using Fmoc-NCO. Although the aziridinomitosene tetracycle is sensitive, a range of protecting group manipulations and redox chemistry can be performed if suitable precautions are taken. A study of DNA alkylation by the first C-6,C-7-unsubstituted aziridinomitosene 11a has been carried out, and evidence for DNA cross-link formation involving nucleophilic addition to the quinone subunit is described.     

An efficient synthesis of the novel triazoloquinazoline adenosine antagonist,CGS 15943

An efficient synthesis of the novel triazoloquinazoline adenosine antagonist, CGS 15943, is reported in five steps in approximately 50% overall yield. A key reaction in the synthetic sequence is the double cyclization of an N-(substituted-2-cyanophenyl)carbamate with a carboxylic acid hydrazide to afford a [1,2,4]triazolo-[1,5-c]quinazolin-5(6H)-one in high yield without either a Dimroth or “translocative” rearrangement occurring. Another key reaction is the condensation of a 2-(1H-1,2,4-triazol-5-yl)benzenamine with cyanamide under acidic conditions to prepare a guanidine.     

H2/CO2 separations in multicomponent metal-adeninate MOFs with multiple chemically distinct pore environments

Metal–organic frameworks constructed from multiple (≥3) components often exhibit dramatically increased structural complexity compared to their 2 component (1 metal, 1 linker) counterparts, such as multiple chemically unique pore environments and a plurality of diverse molecular diffusion pathways. This inherent complexity can be advantageous for gas separation applications. Here, we report two isoreticular multicomponent MOFs, bMOF-200 (4 components; Cu, Zn, adeninate, pyrazolate) and bMOF-201 (3 components; Zn, adeninate, pyrazolate). We describe their structures, which contain 3 unique interconnected pore environments, and we use Kohn–Sham density functional theory (DFT) along with the climbing image nudged elastic band (CI-NEB) method to predict potential H₂/CO₂ separation ability of bMOF-200. We examine the H₂/CO₂ separation performance using both column breakthrough and membrane permeation studies. bMOF-200 membranes exhibit a H₂/CO₂ separation factor of 7.9. The pore space of bMOF-201 is significantly different than bMOF-200, and one molecular diffusion pathway is occluded by coordinating charge-balancing formate and acetate anions. A consequence of this structural difference is reduced permeability to both H₂ and CO₂ and a significantly improved H₂/CO₂ separation factor of 22.2 compared to bMOF-200, which makes bMOF-201 membranes competitive with some of the best performing MOF membranes in terms of H₂/CO₂ separations.

Tailorable multicomponent MOFs and MOF membranes for efficient H₂/CO₂ separation.     

New Dammarane Monodesmosides from the Acidic Deglycosylation of Notoginseng‐Leaf Saponins

Three new dammarane monodesmosides, named notoginsenosides Ft₁ ( 1 ), Ft₂ ( 2 ), and Ft₃ ( 3 ), together with three known ginsenosides, were obtained from a mild acidic hydrolysis of the saponins from notoginseng (Panax notoginseng (Burk .) F. H. Chen ) leaves. Their structures were elucidated to be (3β,12β,20R)‐12,20‐dihydroxydammar‐24‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 1 ), (3β,12β)‐12,20,25‐trihydroxydammaran‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 2 ), and (3β,12β,24ξ)‐12,20,24‐trihydroxydammar‐25‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 3 ), by means of spectroscopic evidences. The known ginsenosides Rh₂ and Rg₃ 4 – 6 were obtained as the major products from this acidic deglycosylation.     

A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

TR-FTIR absorption spectroscopy of transition metal carbonyl radicals generated by photodissociation of metal-metal bonds, by halogen abstraction or by radical ligand substitution

Three methods of obtaining time-resolved Fourier-Transform infrared (TR-FTIR) absorption spectra of transition metal carbonyl radicals in hexane are reported here. For the first method, CpM(CO)₂L and Cp*M(CO)₂L (M = Mo, W; L = CO, PR₃) radicals have been generated by photodissociation of the corresponding metal-metal bonded dimers. Radicals of formula M(CO)₄L (M = Mn, Re; L = CO, PR₃, AsPh₃, SbPh₃) and CpM(CO)_n (M = Fe, Mo; n = 2, 3) have been produced via the second method which is halogen abstraction of the transition metal carbonyl halides using CpMo(CO)₃ radical. For the third method, fast radical ligand substitution kinetics has been exploited to generate CpMo(CO)₂PR₃ radicals from CpMo(CO)₃ in the presence of free phosphines. An assessment of the three methods with respect to TR-FTIR spectroscopic detection of radicals was also discussed.     

Calculation of Vertical Ionization Potentials of Oxygen Difluoride,Difluoramine, and Difluoromethane by Local Density Approximation

The vertical ionization potentials of OF₂, HNF₂, and CH₂F₂ were computed by the deMon density functional program. The results are compared with earlier calculations and with experiment. The average absolute deviation of the 21 computed ionization potentials of the outer valence electrons from experiment is 0.44 eV, which compares well with 0.37 eV for frozen-orbital configuration-interaction calculations. Although this performance is not as good as perturbation corrections to Koopmans' theorem, the computation requirements are much less demanding.     

Asymmetric Synthesis of Calyculin C. 2. Synthesis of the C(26)-C(37) Fragment and Model Wittig Couplings

We report our synthesis of the C(26)-C(37) fragment of serine/threonine protein phosphatase PP1 and PP2A inhibitor calyculin C (1). Outlined in this paper are synthetic approaches to the two components based on disconnection at the C(33)-N(3) amide bond. We report the successful synthesis of the C(33)-C(37) aza-sugar derived from D-lyxose which was coupled onto a C(26)-C(32) aminooxazole originating from L-pyroglutamic acid. Elaboration of the resulting amide to a fully deprotected C(26)-C(37) fragment of calyculin C completed our synthesis. This provided an appropriate phosphonium salt for use in a Wittig olefination for joining both halves of the natural product.