Formation of abnormal dual‐peak profiles in large tilt angle boron implantation

Large tilt angle (LTA) implantation has been employed in Si manufacturing processes in many applications, such as lightly doped drain and halo implant. The depth profile of boron ions usually consists of only single peak at incident angle of 0° with respect to the perpendicular of the silicon surface. However, an abnormal dual‐peak profile was observed at LTA (>40°) with incident energy of 160 keV. By using a Monte Carlo method to simulate the ion implant process, it was found that the projected range of boron ions agrees completely with the formation of the first peak position that is shallower in depth, while the cause for the second peak that corresponds with a depth much deeper in the Si substrate was unknown. During the simulation, it was also found that when the tilt angle was increased, the sputtering yields and Si displacements increased significantly, and this phenomenon indicates that during LTA implantation, Si damage may not be negligible anymore. The Si damage effect that was as due to either low Si density or transient Si displacement in the simulation could have led to partial incident boron ions penetrating much deeper into the Si substrate and thus, caused the emergence of the second peak. Copyright © 2016 John Wiley & Sons, Ltd.     

Chemical treatments on the cuticle layer enhancing the uranium(VI) uptake from aqueous solution by amidoximated wool fibers

Urea, sodium hydroxide and sodium sulfide were used to treat the cuticle layer of wool before graft copolymerization and amidoximation to enhance the uranium uptaking capacity of amidoximated wool fiber based adsorbent (Wool-g-AOs). The wool-g-AOs were used for recovery of U(VI) from aqueous solutions. The simulated nuclear industry effluent was used for investigating the selectivity and industrial applicability of Wool-g-AOs. The adsorption of uranium(VI) on Wool-g-AOs was pH dependent. The Langmuir model fitted well with the equilibrium data. Kinetic data were fitted well to pseudo second order model.

     

Flexural behavior of strain-softening solids

The flexural behavior of a beam is investigated in an attempt to establish a correlation between the tensile and bending properties of strain-softening solids. Given the complete uniaxial stress—strain relations, including the post-peak tension-softening portion, it is possible to predict the flexural behavior in moment—curvature and load—deflection relations. The results indicate that strain-softening gives rise to enhanced bending strength in agreement with experimental data. Conversely, given the bending responses together with the softening characteristics the complete tensile behavior can be determined. Since bending experiments are easier to perform than uniaxial tensile tests, this well-defined correlation provides a feasible means to obtain the entire tensile behavior of strain-softening solids such as concrete, rocks and ceramics.     

Thermal stability and flame retardancy of PET/magnesium salt composites

Nano-Mg(OH)₂ (nanometre magnesium hydroxide, nano-MH) was successfully introduced into the esterification and polycondensation system by in situ polymerization to obtain PET/magnesium salt composites (PETMS). The thermal properties and flame retardancy of PETMS were investigated by differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), UL-94 vertical burning and limited oxygen index (LOI) test. The DSC and TGA results show that magnesium salts in the PET matrix have little effect on the thermal properties of PET, but a significant effect on the thermal stabilities of the composites. The results of LOI and UL-94 test show PETMS have higher LOI values (≥25%) and V-0 rating without melt dripping in the UL-94 test, indicating that PETMS have good flame retardancy and anti-dripping property. Moreover, the residues of magnesium salts and composites after TGA test were also studied by Fourier transform infrared spectroscopy (FTIR) to better understand the mechanism of flame retardancy, which reveals that magnesium salts accelerate the degradation of PET and catalyze the formation of char. The SEM results show the morphological structures of the char effectively protect the composites’ internal structures and inhibit the heat, smoke transmission and reduce the fuel gases when the fire contacts them.     

Light-enhanced catalysis by pyridoxal phosphate-dependent aspartate aminotransferase

The mechanisms of pyridoxal 5'-phosphate (PLP)-dependent enzymes require substrates to form covalent "external aldimine" intermediates, which absorb light strongly between 410 and 430 nm. Aspartate aminotransferase (AAT) is a prototypical PLP-dependent enzyme that catalyzes the reversible interconversion of aspartate and α-ketoglutarate with oxalacetate and glutamate. From kinetic isotope effects studies, it is known that deprotonation of the aspartate external aldimine C(α)-H bond to give a carbanionic quinonoid intermediate is partially rate limiting in the thermal AAT reaction. We show that excitation of the 430-nm external aldimine absorption band increases the steady-state catalytic activity of AAT, which is attributed to the photoenhancement of C(α)-H deprotonation on the basis of studies with Schiff bases in solution. Blue light (250 mW) illumination gives an observed 2.3-fold rate enhancement for WT AAT activity, a 530-fold enhancement for the inactive K258A mutant, and a 58600-fold enhancement for the PLP-Asp Schiff base in water. These different levels of enhancement correlate with the intrinsic reactivities of the C(α)-H bond in the different environments, with the less reactive Schiff bases exhibiting greater enhancement. Time-resolved spectroscopy, ranging from femtoseconds to minutes, was used to investigate the nature of the photoactivation of C(α)-H bond cleavage in PLP-amino acid Schiff bases both in water and bound to AAT. Unlike the thermal pathway, the photoactivation pathway involves a triplet state with a C(α)-H pK(a) that is estimated to be between 11 and 19 units lower than the ground state for the PLP-Val Schiff base in water.     

Isolation of chemical constituents from Enicosanthum cupulare (King) Airy-Shaw

Six chemical constituents were isolated from Enicosanthum cupulare (King) Airy-Shaw. The structures of the isolated compounds were determined using 1D, 2D-NMR and were found to be identical to those previously reported for these compounds. Three aporphine alkaloids, O-methylmoschatoline, liriodenine and oxostephanine were isolated from this plant for the first time. In addition, we examined the effects of these compounds on melanogenesis in murine B16 melanoma cells; O-methylmoschatoline increased melanin content in these cells.     

Equivalent contributing depth investigated by a lateral wave with axial transmission in viscoelastic cortical bone

Cortical bone is a viscoelastic heterogeneous medium which may be assessed with axial transmission. This work aims at evaluating the average depth investigated by the lateral wave for radial variations of material properties in relatively thick cortical bone. The equivalent contributing depth (ECD) is derived from the finite element simulation results for spatial variations of a viscoelastic coefficient (η(11)) and of porosity. A value of ECD equal to around 1.6 mm is obtained for a spatial variation of η(11). The method fails to predict accurate values of the ECD for a spatial variation of porosity, because all parameters vary simultaneously.     

A secure quantum key distribution scheme based on variable quantum encoding algorithms

The security of the quantum secret key plays a critical role in quantum communications.Thus far,one problem that still exists in existing protocols is the leakage of the length of the secret key.In this letter,based on variable quantum encoding algorithms,we propose a secure quantum key distribution scheme,which can overcome the security problem involving the leakage of the secret key.Security analysis shows that the proposed scheme is both secure and effective.     

The phase diagram for coexisting d-wave superconductivity and charge-density waves: cuprates and beyond

Phase diagrams of d-wave superconductivity characterized by an order parameter Δ coexisting with charge-density waves (CDWs) characterized by an order parameter Σ were constructed for the two-dimensional Fermi surface (FS) appropriate to, e.g., cuprates. CDWs were considered as an origin of the pseudogap appearing at antinodal FS sections of the d(x2-y2) superconductor. Two types of the Σ-reentrance were found: with the temperature, T, and with the opening of the CDW sector, 2α. The angular plots in the momentum space for the resulting gap profile over the FS ('gap roses') were obtained. The gap patterns are rather involved, giving insight into the difficulties of the interpretation of photoemission spectra. It was shown that the Σ-Δ coexistence region exists even for the complete dielectric gapping due to the distinction between the superconducting and CDW order parameter symmetries. The checkerboard and unidirectional CDW configurations were examined, and both the phase diagrams and the behavior with T and α of the order parameters were found to differ. A more general case with a non-zero mismatch angle β between the superconducting lobes and the CDW sectors was analyzed, the case β = π/4 corresponding to the d(xy) symmetry of the superconducting order parameter. The phase diagrams were found to be sensitive to β-variations, showing that internal strains and external pressure can drastically affect the behavior of Σ(T) and Δ(T).     

Theoretical investigation of encapsulation processes of C60 into single-wall carbon nanotubes

The encapsulation of C₆₀ into single-wall carbon nanotubes is systematically studied by tight-binding molecular dynamics method with an appropriate long-range Lennard-Jones potentials. For a (16,0) nanotube, it is impossible to encapsulate C₆₀ into the tube because of a much larger energy barrier with the relaxation of the open end.