����Copula������Ӧ��-ǿ��ģ�Ϳɿ��ȵķDz�������

In this paper, a nonparametric method for reliability of the stress-strength model is proposed when the dependent stress variable and strength variable are subject to right censoring. The dependence between variables is measured by the common Farlie-Gumbel-Morgenstern copula function and Clayton copula function. Using the empirical process theory, consistency and asymptotic normality of the proposed estimator is established in this paper. The results of numerical simulation show that the proposed method performs well in the case of finite sample. The method proposed in this paper has a wide application prospect in practice.     

Chemical synthesis and characterization of manganese oxide coated Ni particles

Nanosized Ni particles with an average diameter of about 8 nm were prepared by reducing of NiCl 2 with sodium borohydride (NaBH 4 ) in aqueous solution. By moderate annealing in protective atmosphere, the composite grew up to be 15-20 nm particles. Both of the as-prepared and annealed Ni particles were coated by a layer of manganese oxide via decomposition reaction in aqueous KMnO4 solution. Hysteresis loops of as-prepared samples show a large increase in the magnetization with decreasing temperature and an unsaturated component at high magnetic field. In contrast, the ferromagnetic characteristics of annealed one are much stronger with large magnetization and coercivity. The thermomagnetic curves verified the coexistence of ferromagnetic Ni and antiferromangetic Mn oxide phases. But there exists no exchange bias behavior in the samples, even though the interface structure between the ferromagnetic Ni core and the antiferromagnetic manganese oxides has been distinctly formed. The absence of exchange bias probably originates from the weak ferromagnetic characteristic of Ni cores.     

Error evaluation for Zernike polynomials fitting based phase compensation of digital holographic microscopy

Combining the experimental research with the simulation calculation, the error evaluation for Zernike polynomials fitting (ZPF) based phase compensation of digital holographic microscopy (DHM) is performed. The obtained results show that the reconstructed phase with high precision can be obtained by ZPF phase compensation algorithm. Moreover, the phase error for ZPF based phase compensation algorithm increases with both the variation of object height and object transverse area, the larger variation of object height, the larger of phase error, and the larger of object transverse area, the faster increase of RMS phase error. To decrease the error of ZPF phase compensation algorithm, it is required to ensure one of the variations of object height and object transverse area to be a small value. Importantly, the proposed method supplies a useful tool for the error evaluation of phase compensation algorithm.     

Synthesis and Characterization of 1-Substituted - 1,2,3,4-Tetrahydro -9H-Pyrido[3,4-b]Indole-3-Carboxylic Acid Methyl Ester

以L-色氨酸甲酯盐酸盐为起始原料,经过Pictet-Spengler反应,再通过结晶诱导不对称转化(CIAT)过程,最后用饱和碳酸钠溶液脱除盐酸后高效选择性的得到1-取代-1,2,3,4-四氢-9H-吡啶并[3,4-b]吲哚-3-羧酸甲酯,目标产物通过重结晶或者柱层析方法纯化,所有化合物的结构均经元素分析,IR,1H NMR,13C NMR确证.     

基于B样条的TERS形貌成像背景扣除方法

在针尖增强拉曼光谱(TERS)形貌成像过程中，由于针尖与扫描台无法绝对平行、样品电子密度骤变处针尖快速升降以及扫描控制系统响应时间特性差等综合原因的影响，往往使形貌图中带有倾斜或边界面卷曲的成像背景。成像背景对样品形貌的识别和分析带来十分不利的影响，而背景扣除就是解决该问题的重要手段，也是形貌成像预处理的重要组成部分。背景扣除的原理一般是通过拟合背景的方法来扣除成像中的背景。传统的背景扣除方法是利用多项式拟合的方法对成像进行逐行的基线校正，但是该方法在处理形貌成像时常常会由于过拟合而造成样品形貌的失真，同时容易在图片上留下明显的线条纹理。针对传统方法的缺点，本文提出采用B样条曲面拟合方法，直接对样品形貌图进行曲面背景拟合，发挥B样条低阶光滑的优点，能够有效克服传统方法的缺陷。在实验中，同时利用传统方法和该方法对金单晶和合成金片的形貌图进行背景扣除，实验结果表明，两种方法都能够扣除样品形貌图中的成像背景，但与传统方法相比，所提出的方法不会造成样品形貌的失真，且不会留下线条纹理，获得了更加良好的背景扣除效果，为进一步分析样品形貌特征提供了更准确可靠的信息，是一种更加有效的TERS形貌成像背景扣除算法。     

Synthesis of 2-aminooxazolines from isonitriles and iodine

A novel one-pot protocol for the synthesis of substituted 2-aminooxazoline from isonitriles and 2-aminoethanol was developed and the reactions involved imidoyl diiodide intermediates,which were generated by mixing isonitriles and iodine in CH₂C1₂ at room temperature.     

A novel sorptive extraction method based on polydimethylsiloxane frit for determination of lung cancer biomarkers in human serum

In this study, a porous polypropylene frit was coated with polydimethylsiloxane (PDMS) as extraction medium, based on the home-made PDMS-frit, a rapid, simple and sensitive sorptive extraction method was established for analysis of potential biomarkers of lung cancer (hexanal and heptanal) in human serum samples. In the method, derivatization and extraction occurred simultaneously on the PDMS-frit, then the loaded frit was ultrasonically desorbed in acetonitrile. Polymerization, derivatization–extraction and desorption conditions were optimized. Under the optimal conditions, satisfactory results were gained, a wide linear application range was obtained in the range of 0.002–5.0 μmol L⁻¹ (R > 0.997) for two aldehydes, the detection limits (S N⁻¹ = 3) were 0.5 nmol L⁻¹ for hexanal and 0.4 nmol L⁻¹ for heptanal. The relative standard deviations (RSDs, n = 5) of the method were below 7.9% and the recoveries were above 72.7% for the spiked serum. All these results hint that the proposed method is potential for disease markers analysis in complex biological samples.     

冶金法生产太阳能级硅的除硼方法、技术及工艺

太阳能作为一种绿色可再生能源受到了广泛关注,而杂质去除是从冶金级硅中获得太阳能级硅所需的纯化过程,对硅基太阳能电池的制备至关重要。冶金法制备太阳能级多晶硅新工艺技术由于其能耗低、成本低和污染少等优点,成为研究开发的热点,但如何有效地去除硼是我们面临的最严峻的挑战之一。本文综述了硼的热力学和动力学性质(溶解度、扩散率、扩散系数、传质系数和活度系数)以及近年来除硼的相关课题研究(吹气、炉渣处理、等离子体处理、酸浸和溶剂精炼)。研究发现,溶剂精炼是一种很有前途的获取高纯硅的方法,硅的富集率以及硼的去除率均可达到90%以上,而添加剂能够加强硼化物的形成和析出来改进除硼工艺,且后续几乎可被完全消除,不会对精炼硅造成污染,这将更加有效除硼并增加工艺实用性。最后本文对几种除硼工艺进行了比较分析,并对冶金法的应用前景进行了展望。     

Modification of the Solution Behavior of Pd12L24 Metal–Organic Nanocages via PEGylation

The dilute solutions behaviors of Pd₁₂L₂₄ metal–organic nanocage and its two PEGylated derivatives are explored. The basic nanocages can self‐assemble into vesicle‐like blackberry structures in polar solvents via counterion‐mediated attraction, whereas the PEGylated nanocages always stay as discrete ions under the same conditions, demonstrating that the PEGylation can improve the stability of the single nanocages. In addition, larger nanocages are found to self‐assemble in less polar solvents.     

Cadmium(II)–Triazole Framework as a Luminescent Probe for Ca2+ and Cyano Complexes

A bidentate ligand, 1‐{4‐[4‐(1H‐1,2,4‐triazol‐1‐yl)phenoxy]phenyl}‐1H‐1,2,4‐triazole (TPPT), has been designed and synthesized. By using TPPT as a building block for self‐assembly with Cd(NO₃)₂ ? 4 H₂O and CdCl₂ ? 10.5 H₂O, novel 1D double‐chain {[Cd(TPPT)(NO₃)₂] ? 3 H₂O}_n ( 1 ) and 2D (4,4) layer [Cd(TPPT)Cl₂(H₂O)]_n ( 2 ) have been constructed. When 1 was employed as a precursor and exposed to DMF or N,N′‐dimethylacetamide (DMAC), the crystals of 1 dissolved and reassembled into two types of brown block‐shaped crystals of 1D double chains: {[Cd(TPPT)₂(NO₃)₂] ? DMF}_n ( 1 a ) and {[Cd(TPPT)₂(NO₃)₂] ? DMAC}_n ( 1 b ). The anion‐exchange reactions of complex 2 have also been investigated. After gently stirring crystals of 2 in CHCl₃/C₂H₅OH/H₂O containing NaBr, NaI ? 2 H₂O, or NaOAc ? 3 H₂O, the crystals retained their crystalline appearances. A remarkable single crystal to single crystal transformation was observed and 1D double chains of {[Cd(TPPT)Br₂] ? C₂H₅OH}_n ( 2 a ) and {[Cd(TPPT)₂I₂] ? CHCl₃}_n ( 2 b ), and 1D single chains of [Cd(TPPT)(H₂O)₂(CH₃COO)₂]_n ( 2 c ), can be obtained. Luminescent properties indicate that 1 shows excellent selectivity for Ca²⁺ and cyano complexes. To the best of our knowledge, this is the first example of a luminescent probe for Ca²⁺ based on triazole derivatives.