Three Mechanisms in One Material: Uranium Capture by a Polyoxometalate–Organic Framework through Combined Complexation,Chemical Reduction,and Photocatalytic Reduction

The design and synthesis of uranium sorbent materials with high uptake efficiency, capacity and selectivity, as well as excellent hydrolytic stability and radiation resistance remains a challenge. Herein, a polyoxometalate (POM)–organic framework material ( SCU‐19 ) with a rare inclined polycatenation structure was designed, synthesized through a solvothermal method, and tested for uranium separation. Under dark conditions, SCU‐19 can efficiently capture uranium through ligand complexation using its exposed oxo atoms and partial chemical reduction from U^VI to U^IV by the low‐valent Mo atoms in the POM. An additional U^VI photocatalytic reduction mechanism can occur under visible light irradiation, leading to a higher uranium removal without saturation and faster sorption kinetics. SCU‐19 is the only uranium sorbent material with three distinct sorption mechanisms, as further demonstrated by X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near edge structure (XANES) analysis.     

MIL-101(Fe)高效催化 β-蒎烯与甲醛的Prins缩合制备诺卜醇

通过水热晶化法制备了MIL-101(Fe)金属有机骨架材料, 利用X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)、 热重分析(TG)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和X射线光电子能谱(XPS)对催化剂的结构和形貌进行了表征. 结果表明, 该材料用于催化β-蒎烯与甲醛的Prins缩合制备诺卜醇反应的效果优异; 催化剂合成温度、 合成时间、 催化剂用量、 反应溶剂、 反应温度和反应时间对β-蒎烯的反应结果均有一定影响. 在相似的反应条件下, 合成的MIL-101(Fe)催化β-蒎烯制备诺卜醇反应的最佳条件为使用150 ℃下反应15 h合成的催化剂MIL-101(Fe), 在90 ℃下反应8 h得到的β-蒎烯转化率高达97.3%, 诺卜醇选择性达到96.7%.     

Comparative analysis of nucleosides,nucleobases, and amino acids in different parts of Angelicae Sinensis Radix by ultra high performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry

A rapid and sensitive ultra high performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry method was established and employed to determine 21 nucleosides, nucleobases, and amino acids in 60 samples from different parts of Angelicae Sinensis Radix. The established methods were validated by good linearity (r² > 0.9937), limits of detection (0.12–77.75 ng/mL), limits of quantitation (0.31–272.13 ng/mL), intra‐ and interday precisions (RSD ≤ 4.84%, RSD ≤ 6.26%), stability (RSD ≤ 5.92%), repeatability (RSD ≤ 7.14%), recovery (91.4–103.4%), and matrix effects (0.92–1.03). Chemical comparative analysis revealed that the content of total analytes in four parts of Angelicae Sinensis Radix were different, and exhibited the order: Head (14.89 mg/g) > Body (10.15 mg/g) > All (8.22 mg/g) > Tail (6.23 mg/g). Principal component analysis showed that the samples could be classified into four groups in accord with four different parts of Angelicae Sinensis Radix. The results could provide a scientific basis and reference for the quality control of Angelicae Sinensis Radix, and may be conducive to further research on the pharmacological activities of Angelicae Sinensis Radix.     

Molecular Mechanism Study on Effect of Biodegradable Amino Acid Ester–Substituted Polyphosphazenes in Stimulating Osteogenic Differentiation

Amino acid ester substituted polyphosphazenes are osteoactive benefiting from their phosphorus‐containing chemical structure, which highlights interests in bone tissue engineering. To correlate their chemical structures with cell activities, in this study, poly[(ethyl alanato)_0.3(ethyl glycinato)_0.7phosphazene] (PAGP) and poly[(ethyl phenylalanato)_0.3(ethyl glycinato)_0.7phosphazene] (PPGP) are synthesized to carry out studies on cell osteogenic differentiation. In the non‐contact culture manner, bone mesenchymal stromal cells (BMSCs) are cultured in transwell chambers containing PAGP or PPGP films, while the cells and the materials do not contact. In the contact culture manner, BMSCs are cultured on the PAGP or PPGP films. In the meantime, solutions containing PAGP or PPGP degradation products (i.e., phosphate, ammonium, and corresponding amino acids) are applied for cell culture using inorganic phosphate (Pi) ion as control. Thus, the influences from substrate surface and degradation products can be identified separately. The results reveal that both the phosphorus‐containing surface of PAGP and PPGP films and their degradation products play significant roles in regulating cell behaviors. In comparison with PAGP, PPGP seems able to provide relatively stable phosphorus‐containing surface to strengthen the cell‐scaffold interaction because of its slower degradation rate and higher Young's modulus, leading to greater promotion in osteogenic differentiation via contact effect.     

Low-temperature preparation of F-doped TiO2 film and its photocatalytic activity under solar light

A novel and simple method for preparing F-doped anatase TiO₂ (defined as FTO) film with high photocatalytic activity was developed using titanium-n-butoxide and NH₄F as TiO₂ and fluorine precursors under mild condition, i.e. low temperature (lower than 373 K) and ambient pressure. The prepared samples were characterized by XRD, SEM, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectrum (DRS), photoluminescence spectrum (PL) and TG-DSC analysis. The photocatalytic activity was evaluated by decomposing X-3B under artificial solar light. The results showed that the crystallinity of TiO₂ was improved by F-doping. F⁻ ions can prevent the grain growth, and the transformation of anatase to rutile phase was also inhibited. The doped fluorine atoms existed in two chemical forms, and the ones incorporated into TiO₂ lattice might take a positive role in photocatalysis. Compared with surface fluorination samples, FTO film exhibited better photocatalytic activity. The high photocatalytic activity of FTO may due to extrinsic absorption through the creation of oxygen vacancies rather than the excitation of the intrinsic absorption band of bulk TiO₂. Furthermore, the FTO can be recycled with little photocatalytic activity depression. Without any further treatment besides rinsing, after 6 recycle utilization, the photocatalytic activity of FTO film was still higher than 79%.     

Low-temperature preparation of anatase titania-coated magnetite

A composite photocatalyst with an anatase titania shell and a magnetite core was prepared in a novel way at low temperature (75 °C at most) by coating photoactive titanium dioxide onto a magnetic Fe₃O₄ core. The photocatalytic activity of the prepared photocatalyst was evaluated by the degradation of model contaminated water of phenol and compared to single-phase titania (either Degussa P25 or prepared titania without magnetic Fe₃O₄). The results showed that the photoactivity was slightly depressed. Then, a remarkable improvement in photoactivity was achieved by modifying the photocatalyst with a SiO₂ layer between the Fe₃O₄ core and TiO₂ shell. The repetitive using of the modified photocatalyst was also investigated, and experimental results illustrated that the photocatalytic-degraded ratio of phenol was still higher than 80% after six cycles.     

Adsorption of 2‐amino‐5‐cyanopyridine on a gold surface as probed by surface‐enhanced Raman spectroscopy

The adsorption of 2‐amino‐5‐cyanopyridine (2‐ACP) was investigated in solution at different pH values by i n situ surface‐enhanced Raman scattering (SERS) spectroscopy combined with the electrochemical method. The assignments of the main bands were first performed on the basis of the spectral features of similar compounds and with the help of density functional theory calculations. The results revealed that the adsorption and the interfacial structure of 2‐ACP on the Au electrode depended on the applied potential and the pH values of the solution. In the natural solution, 2‐ACP was adsorbed on the surface with a vertical orientation by the CN group from − 0.4 to − 1.0 V, whereas in the − 0.4 to 0.8 V range, the N atom of the pyridine ring was bound to the surface. A transition region for the reorientation of the two adsorption modes was observed from − 0.8 to − 0.4 V. A flat configuration was preferred at an extremely negative potential. A similar surface adsorption behavior was observed in the alkali environment, while the Stark effect slope decreased because of the adsorption of OH⁻. Due to the protonation of N atom in the acidic solution, the potential region for the coexistence of two configurations ranged from − 0.4 to 0.2 V. Additionally, a similar adsorption configuration was proposed on the Au colloids at various pH values. The results revealed that the adsorption behavior became more complex on colloidal surfaces than that on a rigid electrode surface. Copyright © 2010 John Wiley & Sons, Ltd.     

Hydrogel-Derived Honeycomb Ni3S4/N,P-C as an Efficient Oxygen Evolution Catalyst

The development of high-efficiency electrocatalysts with low costs for the oxygen evolution reaction (OER) is essential, but remains challenging. Herein, a new synthetic process is proposed to prepare Ni₃S₄ particles embedded in N,P-codoped honeycomb porous carbon aerogels (Ni₃S₄/N,P-HPC) through a hydrogel approach. The preparation of Ni₃S₄/N,P-HPC begins with the sol–gel polymerization of tripolyphosphate, chitosan, and guanidine polymer that contains metal-binding sites, allowing for the uniform incorporation of Ni ions into the gel matrix, freeze-drying, and subsequent carbonization under an inert atmosphere. This synthesis resolves difficulties in synthesizing the pure Ni₃S₄ phase caused by the instability of Ni₃S₄ at high temperature, while affording good control of the porous structure and N,P-doping of carbon aerogels. The synergy between the structural advantages of N,P-carbon aerogels (such as easily accessible active sites, high specific surface area, and excellent electron transport) and the intrinsic electrochemical properties of Ni₃S₄ result in the outstanding OER performance of Ni₃S₄/N,P-HPC, with overpotentials as low as 0.37 V at 10 mA cm⁻². The work outlined herein offers a simple and effective method for the development of carbon-based electrocatalysts for renewable energy conversion.     

Quantitative ultra‐high‐performance liquid chromatography–tandem mass spectrometry for determination of dexmedetomidine in pediatric plasma samples: Correlation with genetic polymorphisms

Dexmedetomidine is an important sedative agent administered as premedication to achieve procedural sedation in children. To describe the correlation between the genetic state and the concentration of dexmedetomidine, it is necessary to develop a specific, time‐saving and economical method for detection of dexmedetomidine in plasma samples. In this work, an ultra‐high‐performance liquid chromatography (UHPLC)–tandem mass spectrometry method has been established and validated for detection of dexmedetomidine in plasma from pediatric population. After a simple liquid–liquid extraction with an organic solution, the analytes were separated on an ACQUITY BEH C₁₈ column (2.1 mm × 50 mm, 1.7 μm particle size) by gradient elution with the mobile phase of acetonitrile and 1‰ aqueous formic acid (flow rate 0.3 mL min^?1). Mass spectrometry measurements were performed under the positive selected reaction monitoring and the mass transitions monitored were m/z 201.3 → 95.1, 204.2 → 98.0 for dexmedetomidine and deuterated medetomidine (internal standard), respectively. Validation of the method based on China Food and Drug Administration guidelines showed acceptable selectivity. The UHPLC method employed a stable isotope‐labeled internal standard, showed good specificity and was successfully used to detect dexmedetomidine in plasma samples from 260 pediatric patients. A subsequent application of this method to a pharmacogenetic study was also described. Importantly, this is the first study to report the correlation between CYP2A6 rs835309 activity and concentration of dexmedetomidine.     

Manipulating the Click Reactivity of Dibenzoazacyclooctynes: From Azide Click Component to Caged Acylation Reagent by Silver Catalysis

Strain-promoted azide–alkyne cycloaddition using dibenzoazacyclooctyne (DBCO) is widely applied in copper-free bioorthogonal reactions. Reported here is the efficient acid-promoted rearrangement and silver-catalyzed amidation of DBCO, which alters its click reactivity robustly. In the switched click reaction, DBCO, as a caged acylation reagent, enables rapid peptide/protein modification after decaging facilitated by silver catalysts, rendering site-specific conjugation of an IgG antibody by a Fc-targeting peptide.