Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

字节全加器及其在无线电测控系统中的应用

对全加器概念进行了推广，并在此基础上给出了使用字节全加器网络的无线电抗干扰算法。通过在实际的无线电测控系统中的应用，结果表明该算法具有良好的无线电抗干扰效果。     

室温下压致铁钴镍合金的bcc→hcp相变

 本文采用高压X光衍射方法在金刚石对顶压砧中在位地（in situ）研究了Fe₆₈Co₂₄Ni₈（wt%）合金在室温下的压致bcc→hcp结构相变和直到40.5 GPa的等温压缩行为。实验结果表明该合金在常压下为bcc结构，晶格常数a₀=(0.287 0±0.000 1) nm，体积V₀=(7.119±0.007) cm³/mol，密度ρ₀=(7.981±0.008) g/cm³；在20.9 GPa附近出现bcc→hcp结构相变，两相共存压力区约10 GPa，在此区域内有晶面间距d(002)_hcp=d(110)_bcc，且原子平面(002)_hcp//(110)_bcc，hcp相比bcc相体积减小(0.33±0.02) cm³/mol；高压相hcp结构的晶格参数比值c/a=1.608±0.004；相变后原子配位数的增加使得hcp相(002)平面内及(002)平面间的最近邻原子间距比bcc相最近邻原子间距分别增大约1.6%和0.5%；用Murnaghan状态方程对实验数据进行最小二乘法拟合，得到bcc相B₀=(130±13) GPa，B₀'=12.6±0.5；hcp相V₀=(6.62±0.04) cm³/mol，B₀=(243±21) GPa，B₀'=6.8±0.3；对于该合金的bcc→fcp相变时的结构转变机制做了详细的讨论。     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007     

原子构成万物是宇宙结构的美 ——原子随笔之二

人类很早就在寻找宇宙万物的组成.古希腊最早的唯物论派从物质世界的内部寻找宇宙万物的本源,认为宇宙万物都由"种子"组成.德谟克利特在这种"种子"思想基础上,提出了宇宙万物是由原子组成的猜想.     

神奇的原子——原子随笔之三

人类虽然在2000多年前就预言了原子的存在，然而可以断言，世界上还没有一个人——无论这个人智商有多高，无论这个人的想象力有多强，能够预言原子的种种神奇．因为在原子的世界里不仅不同于我们熟悉的任何东西，也不同于所能想象的任何事情．物理学家费曼曾说：“它显得又古怪，又神秘．”     

排列形状及阵列数目对纳米导线阵列场发射性能的影响

为了进一步研究纳米导线阵列的排列形状以及阵列数目对其场发射行为的影响，利用镜像悬浮球模型对正方形以及六边形排列的纳米导线阵列的场发射行为进行计算与模拟，近似的得到纳米导线阵列的场发射增强因子满足如下的变化趋势：β=h/ρ(1/1+W)+1/2(1/1+W)²+3,其中h为纳米导线的高度，ρ为纳米导线的半径，W是以R为自变量的函数，R为纳米导线阵列的间距.结果显示纳米导线阵列的排列形状对其场发射性能的影响较小，而阵列间距则是影响场发射性能的关键因素：当R<R₀时，场发射增强因子随着阵列间距的减小而急剧减小；当R>R₀时，场发射增强因子基本不变，其中R₀为导线阵列场发射的最佳间距.进一步研究表明改变纳米导线阵列的数目基本不会改变阵列的场发射性能随间距的变化趋势，但是随着阵列数目的增加，R₀会有一定程度的减小，场发射增强因子也会降低. 关键词： 纳米导线 场发射 增强因子 阵列数目     

非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

圆外区域求解Helmholtz方程

1引言许多科学和工程计算问题都可以归结为无界区域上的偏微分方程边值问题．而求解椭圆方程边值问题的常用技术是有限元方法,可是对于无界区域,在用有限元方法求解时,往往遇到困难．最简单的办法显然是直接略去区域的无界部分求解,但这样做或者导致过低的计算精度,或者要付出很高的计算代价．边界归化,即将求解偏微分方程边值问题转化为边界积分方程,是求解某些无界区域问题的强有力的手段．自70年代以来,有限元和