Understanding the Structural Differences between Spherical and Rod‐Shaped Human Insulin Nanoparticles Produced by Supercritical Fluids Precipitation

In this study, the thermal denaturation mechanism and secondary structures of two types of human insulin nanoparticles produced by a process of solution‐enhanced dispersion by supercritical fluids using dimethyl sulfoxide (DMSO) and ethanol (EtOH) solutions of insulin are investigated using spectroscopic approaches and molecular dynamics calculations. First, the temperature‐dependent IR spectra of spherical and rod‐shaped insulin nanoparticles prepared from DMSO and EtOH solution, respectively, are analyzed using principal component analysis (PCA) and 2D correlation spectroscopy to obtain a deeper understanding of the molecular structures and thermal behavior of the two insulin particle shapes. All‐atom molecular dynamics (AAMD) calculations are performed to investigate the influence of the solvent molecules on the production of the insulin nanoparticles and to elucidate the geometric differences between the two types of nanoparticles. The results of the PCA, the 2D correlation spectroscopic analysis, and the AAMD calculations clearly reveal that the thermal denaturation mechanisms and the degrees of hydrogen bonding in the spherical and rod‐shaped insulin nanoparticles are different. The polarity of the solvent might not alter the structure or function of the insulin produced, but the solvent polarity does influence the synthesis of different shapes of insulin nanoparticles.     

Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries

High energy‐density lithium‐ion batteries are in demand for portable electronic devices and electrical vehicles. Since the energy density of the batteries relies heavily on the cathode material used, major research efforts have been made to develop alternative cathode materials with a higher degree of lithium utilization and specific energy density. In particular, layered, Ni‐rich, lithium transition‐metal oxides can deliver higher capacity at lower cost than the conventional LiCoO₂. However, for these Ni‐rich compounds there are still several problems associated with their cycle life, thermal stability, and safety. Herein the performance enhancement of Ni‐rich cathode materials through structure tuning or interface engineering is summarized. The underlying mechanisms and remaining challenges will also be discussed.     

Helical silica nanotubes: Nanofabrication architecture,transfer of helix and chirality to silica nanotubes

A series of neutral gelators and cationic amphiphiles derived from 1,2 diphenylethylenediamine (I) and 1,2-cyclohexanediamine (II) was synthesised. Helical silica nanotubes were prepared utilising these organic gelators through sol-gel polycondensation of tetraethoxy silane, (TEOS-silica source). Right- and left-handed helical nanotubes respectively were obtained from a 1: 1 mass mixture of optically active, (1S,2S)-III-(1S,2S)-V neutral gelator and (1S,2S)-IV-(1S,2S)-VI cationic amphiphile and a 1: 1 mass mixture of optically active, (1R,2R)-III-(1R,2R)-V neutral gelator and (1R,2R)-IV-(1R,2R)-VI cationic amphiphile, indicating that the handedness of the helical nanotubes varied with the change in the neutral gelator precursors used. The nanotubes were characterised by SEM images.     

Monitoring protein distributions based on patterns generated by protein adsorption behavior in a microfluidic channel

We report a unique monitoring technique of protein distributions based on distinctive patterns generated by protein adsorption behavior on a solid surface in a microfluidic channel. Bare gold and COOH-modified self-assembled monolayer (SAM) sensing surfaces were pre-adsorbed with one of four different proteins: lysozyme, albumin, transferrin, or IgG. Each surface provides a thermodynamically governed platform for immobilizing proteins and generates analyte-specific response patterns. Each surface has its own thermodynamic energy governing pre-adsorbed protein behaviors, so that sample proteins react with the pre-adsorbed ones to different extents depending on their sizes, isoelectric points (pI), and characteristics of the sensing surfaces. Modified surfaces were mounted and monitored in real time using surface plasmon resonance (SPR). Buffer-prepared sample matrices (α1-antitrypsin, haptoglobin, C-reactive protein (CRP), and IgM) characterized protein response patterns. Each surface generated distinctive patterns based on individual SPR angle shifts. We classified each sample with 95% accuracy using linear discriminant analysis (LDA). Our method also discriminated between different concentrations of CRP in the cocktail sample, detecting concentrations as low as 1 nM with 91.7% accuracy. This technique may be integrated with a microfluidic lab-on-a-chip system and monitor the distribution of a specific group of proteins in human serum.     

pH-Sensitive pentablock copolymer nanocapsules as nontoxic and efficient gene carriers

A biodegradable amphiphilic pentablock copolymer PAE‐PCL‐PEG‐PCL‐PAE with a pH‐sensitive unit was synthesized for use as a nontoxic, biodegradable carrier for gene delivery by forming nanocapsules entrapping nucleic acid drugs. The PAE block can interact with plasmid DNA to form polyelectrolyte complexes in an acidic environment. At physiological pH, the PAE blocks are deprotonated and form an insoluble skin, resulting in the formation of nanocapsules that encapsulate plasmid DNA. The surface charges of the nanocapsules became almost neutral at pH = 7.4, and their size ranged from 210 to 280 nm. The nanocapsule maintained most of its transfection efficiency even in the presence of serum. These nanocapsules are therefore potential carriers for systemic gene therapy.

     

Phosphorescent sensor for biological mobile zinc

A new phosphorescent zinc sensor (ZIrF) was constructed, based on an Ir(III) complex bearing two 2-(2,4-difluorophenyl)pyridine (dfppy) cyclometalating ligands and a neutral 1,10-phenanthroline (phen) ligand. A zinc-specific di(2-picolyl)amine (DPA) receptor was introduced at the 4-position of the phen ligand via a methylene linker. The cationic Ir(III) complex exhibited dual phosphorescence bands in CH(3)CN solutions originating from blue and yellow emission of the dfppy and phen ligands, respectively. Zinc coordination selectively enhanced the latter, affording a phosphorescence ratiometric response. Electrochemical techniques, quantum chemical calculations, and steady-state and femtosecond spectroscopy were employed to establish a photophysical mechanism for this phosphorescence response. The studies revealed that zinc coordination perturbs nonemissive processes of photoinduced electron transfer and intraligand charge-transfer transition occurring between DPA and phen. ZIrF can detect zinc ions in a reversible and selective manner in buffered solution (pH 7.0, 25 mM PIPES) with K(d) = 11 nM and pK(a) = 4.16. Enhanced signal-to-noise ratios were achieved by time-gated acquisition of long-lived phosphorescence signals. The sensor was applied to image biological free zinc ions in live A549 cells by confocal laser scanning microscopy. A fluorescence lifetime imaging microscope detected an increase in photoluminescence lifetime for zinc-treated A549 cells as compared to controls. ZIrF is the first successful phosphorescent sensor that detects zinc ions in biological samples.     

Synthesis of cationic quantum dots via a two-step ligand exchange process

A new class of quaternary ammonium derivatives has been used to synthesize cationic CdSe/ZnS quantum dots with exceptional stability in water as well as in biological media.     

Molecular properties of water-unextractable proteoglycans from Hypsizygus marmoreus and their in vitro immunomodulatory activities

Four proteoglycans were sequentially extracted from Hypsizygus marmoreus using 0.1 M NaOH (alkali-soluble proteoglycans [F1] and alkali-insoluble proteoglycans [F3]) and 0.1 M HCl (acid-soluble proteoglycans [F2] and acid-insoluble proteoglycans [F4]), and their structures and immunomodulatory activities were investigated. The proteoglycans were found to contain carbohydrates (19.8-82.4%) with various amounts of proteins (7.7-67.3%), and glucose was the major monosaccharide unit present, along with trace amounts of galactose. The molecular weights (Mw) and the radius of gyration (Rg) of these proteoglycans showed ranges of 16 × 10(4)-19,545 × 10(4) g/mol and 35-148 nm, respectively, showing significant variations in their molecular conformations. The backbones of F1 and F2 were mainly connected through a-(1→3), (1→4) and b-(1→6)-glycosidic linkages with some branches. The F1 and F2 proteoglycans significantly stimulated Raw264.7 cells to release nitric oxide (NO), prostaglandin E2 (PGE(2)) and various cytokines, such as IL-1β, TNF-α and IL-6 by inducing their mRNA expressions.     

Inviscid Models Generalizing the Two-dimensional Euler and the Surface Quasi-geostrophic Equations

Any classical solution of the two-dimensional incompressible Euler equation is global in time. However, it remains an outstanding open problem whether classical solutions of the surface quasi-geostrophic (SQG) equation preserve their regularity for all time. This paper studies solutions of a family of active scalar equations in which each component u _j of the velocity field u is determined by the scalar θ through \({u_j =\mathcal{R}\Lambda^{-1}P(\Lambda) \theta}\) , where \({\mathcal{R}}\) is a Riesz transform and Λ = (?Δ)^1/2. The two-dimensional Euler vorticity equation corresponds to the special case P(Λ) = I while the SQG equation corresponds to the case P(Λ) = Λ. We develop tools to bound \({\|\nabla u||_{L^\infty}}\) for a general class of operators P and establish the global regularity for the Loglog-Euler equation for which P(Λ) = (log(I + log(I ? Δ))) ^γ with 0 ≦ γ ≦ 1. In addition, a regularity criterion for the model corresponding to P(Λ) = Λ ^β with 0 ≦ β ≦ 1 is also obtained.